Dodge Caliber 1 (2007-2012) Torque Spec Settings

By IFCAR - Own work, Public Domain

Below you'll find the tightening torques for the Dodge Caliber 1 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for Dodge Caliber 1

Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Transmission fluid pan Drain plug 32 24
unverified source

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

Are these torque settings right for you?

  • Production years: 2007 - 2012
  • Generation: 1
  • Type of van: car
  • Model variant: Base

All Torque Settings in Tables

engine torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Belt tensioner/Timing chains Timing case cover 12 9 M6
  • 2.4L Engines
  • ED4
unverified source
Belt tensioner/Timing chains Timing case cover 23 17 M8
  • 2.4L Engines
  • ED4
unverified source

drivetrain torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

steering torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

exhaust torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

brakes torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Master cylinder Slave cylinder to Transaxle 12 9
  • 2.4L Engines
unverified source
Master cylinder Slave cylinder to Transaxle 19 14
  • 2.4L Engines
unverified source

suspension torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

general torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Example of a Caliber 1

Rudolf Stricker, CC BY-SA 3.0, via Wikimedia Commons


Did you find the answer to your specific question?
👍 2 👎 5