Hyundai Elantra (1990-1995) Torque Spec Settings
Below you'll find the tightening torques for the Hyundai Elantra in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Hyundai Elantra
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug | 15 | 11 | Minimum |
|
|
| Oil pan | Drain plug | 25 | 18 | Maximum |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1990 - 1995
- Generation: First
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Fuel tank drain plug | 15 | 11 | Minimum |
|
|
| Oil pan | Fuel tank drain plug | 25 | 18 | Maximum |
|
|
| Oil pan | Drain plug | 15 | 11 | Minimum |
|
|
| Oil pan | Drain plug | 25 | 18 | Maximum |
|
|
| Oil filter | Fuel filter | 25 | 18 | Minimum |
|
|
| Oil filter | Fuel filter | 35 | 26 | Maximum |
|
|
| Oil filter | Fuel pressure gauge to fuel filter | 25 | 18 | Minimum |
|
|
| Oil filter | Fuel pressure gauge to fuel filter | 35 | 26 | Maximum |
|
|
| Oil pump | Oil pump bracket to engine | 25 | 18 | Minimum |
|
|
| Oil pump | Oil pump bracket to engine | 33 | 24 | Maximum |
|
|
| Oil pump | Oil pump suction connector to pump bodyOil pump suction connector to pump body | 14 | 10 | Minimum |
|
|
| Oil pump | Oil pump suction connector to pump bodyOil pump suction connector to pump body | 18 | 13 | Maximum |
|
|
| Oil pump | Oil pump mounting bracket bolt | 45 | 33 | Minimum |
|
|
| Oil pump | Oil pump mounting bracket bolt | 55 | 41 | Maximum |
|
|
| Intake manifold | Intake manifold mounting bolt (M8) | 15 | 11 | Minimum |
|
|
| Intake manifold | Intake manifold mounting bolt (M8) | 20 | 15 | Maximum |
|
|
| Intake manifold | Intake manifold mounting nut and bolt | 30 | 22 | Minimum |
|
|
| Intake manifold | Intake manifold mounting nut and bolt | 42 | 31 | Maximum |
|
|
| Intake manifold | Intake manifold stay bolts | 25 | 18 | Minimum |
|
|
| Intake manifold | Intake manifold stay bolts | 30 | 22 | Maximum |
|
|
| Throttle body | Throttle body to intake manifold | 15 | 11 | Minimum |
|
|
| Throttle body | Throttle body to intake manifold | 22 | 16 | Maximum |
|
|
| Sensor | Engine coolant temperature (ECT) sensor | 20 | 15 | Minimum |
|
|
| Sensor | Engine coolant temperature (ECT) sensor | 40 | 30 | Maximum |
|
|
| Water pump | Engine coolant pump to cylinder block | 12 | 9 | Minimum |
|
|
| Water pump | Engine coolant pump to cylinder block | 15 | 11 | Maximum |
|
|
| Water pump | Engine coolant pump pulley | 8 | 6 | Minimum |
|
|
| Water pump | Engine coolant pump pulley | 10 | 7 | Maximum |
|
|
| Water pump | Engine coolant pump to cylinder block (generator brace mounting) | 20 | 15 | Minimum |
|
|
| Water pump | Engine coolant pump to cylinder block (generator brace mounting) | 27 | 20 | Maximum |
|
|
| Water pump | Engine coolant temperature sender | 10 | 7 | Minimum |
|
|
| Water pump | Engine coolant temperature sender | 12 | 9 | Maximum |
|
|
| Water pump | Engine coolant temperature sensor | 20 | 15 | Minimum |
|
|
| Water pump | Engine coolant temperature sensor | 40 | 30 | Maximum |
|
|
| Water pump | Engine coolant outlet fitting bolt | 17 | 13 | Minimum |
|
|
| Water pump | Engine coolant outlet fitting bolt | 20 | 15 | Maximum |
|
|
| Fuel system | High pressure hose flare nut | 20 | 15 | Minimum |
|
|
| Fuel system | High pressure hose flare nut | 40 | 30 | Maximum |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheel hub assembly | Wheel bearing self locking nut | 150 | 111 | Minimum |
|
|
| Wheel hub assembly | Wheel bearing self locking nut | 200 | 148 | Maximum |
|
|
| Clutch assembly | Clutch pedal to pedal support member | 19 | 14 | Minimum |
|
|
| Clutch assembly | Clutch pedal to pedal support member | 28 | 21 | Maximum |
|
|
| Clutch assembly | Clutch pedal support member | 17 | 13 | Minimum |
|
|
| Clutch assembly | Clutch pedal support member | 21 | 15 | Maximum |
|
|
| Clutch assembly | Clutch master cylinder to firewall | 9 | 7 | Minimum |
|
|
| Clutch assembly | Clutch master cylinder to firewall | 14 | 10 | Maximum |
|
|
| Clutch assembly | Clutch release cylinder mounting bolt | 20 | 15 | Minimum |
|
|
| Clutch assembly | Clutch release cylinder mounting bolt | 27 | 20 | Maximum |
|
|
| Clutch assembly | Clutch release cylinder to union bolt | 20 | 15 | Minimum |
|
|
| Clutch assembly | Clutch release cylinder to union bolt | 25 | 18 | Maximum |
|
|
| Clutch assembly | Clutch master cylinder push rod lock nut | 10 | 7 | Minimum |
|
|
| Clutch assembly | Clutch master cylinder push rod lock nut | 15 | 11 | Maximum |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Tie rod end | Tie rod end lock nut | 34 | 25 | Minimum |
|
|
| Tie rod end | Tie rod end lock nut | 50 | 37 | Maximum |
|
|
| Tie rod end | Tie rod end ball joint starting torque | 1 | 1 | Minimum |
|
|
| Tie rod end | Tie rod end ball joint starting torque | 3 | 2 | Maximum |
|
|
| Steering shaft | Steering shaft and joint | 15 | 11 | Minimum |
|
|
| Steering shaft | Steering shaft and joint | 20 | 15 | Maximum |
|
|
| Steering shaft | Steering wheel and shaft | 35 | 26 | Minimum |
|
|
| Steering shaft | Steering wheel and shaft | 45 | 33 | Maximum |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold to nut engine | 25 | 18 | Minimum |
|
|
| Exhaust manifold | Exhaust manifold to nut engine | 30 | 22 | Maximum |
|
|
| Exhaust manifold | Front exhaust pipe nuts to exhaust manifold | 30 | 22 | Minimum |
|
|
| Exhaust manifold | Front exhaust pipe nuts to exhaust manifold | 40 | 30 | Maximum |
|
|
| Exhaust manifold | Front exhautst pipe bolt to engine | 20 | 15 | Minimum |
|
|
| Exhaust manifold | Front exhautst pipe bolt to engine | 30 | 22 | Maximum |
|
|
| Exhaust manifold | Front exhausts pipe bolts to catalytic converter | 40 | 30 | Minimum |
|
|
| Exhaust manifold | Front exhausts pipe bolts to catalytic converter | 60 | 44 | Maximum |
|
|
| Exhaust manifold | Center exhausts pipe bolts to catalytic converter | 30 | 22 | Minimum |
|
|
| Exhaust manifold | Center exhausts pipe bolts to catalytic converter | 40 | 30 | Maximum |
|
|
| Exhaust manifold | Center exhausts pipe bolts to main muffler | 30 | 22 | Minimum |
|
|
| Exhaust manifold | Center exhausts pipe bolts to main muffler | 40 | 30 | Maximum |
|
|
| Exhaust manifold | Center exhaust pipe bolts to bracket | 10 | 7 | Minimum |
|
|
| Exhaust manifold | Center exhaust pipe bolts to bracket | 15 | 11 | Maximum |
|
|
| EGR | EGR valve bolts | 15 | 11 | Minimum |
|
|
| EGR | EGR valve bolts | 22 | 16 | Maximum |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Disc brake | Bleeder screw | 7 | 5 | Minimum |
|
|
| Disc brake | Bleeder screw | 13 | 10 | Maximum |
|
|
| Brake line | Brake hose to front caliper | 25 | 18 | Minimum |
|
|
| Brake line | Brake hose to front caliper | 30 | 22 | Maximum |
|
|
| Brake line | Brake tube flare nut, brake hose | 13 | 10 | Minimum |
|
|
| Brake line | Brake tube flare nut, brake hose | 17 | 13 | Maximum |
|
|
| Brake line | Brake booster mounting nut | 8 | 6 | Minimum |
|
|
| Brake line | Brake booster mounting nut | 12 | 9 | Maximum |
|
|
| Brake line | Brake booster vacuum hose fitting to surge tank | 8 | 6 | Minimum |
|
|
| Brake line | Brake booster vacuum hose fitting to surge tank | 12 | 9 | Maximum |
|
|
| Master cylinder | Master cylinder to booster mounting nut | 8 | 6 | Minimum |
|
|
| Master cylinder | Master cylinder to booster mounting nut | 12 | 9 | Maximum |
|
|
| Parking brake | Backing plate mounting bolt | 50 | 37 | Minimum |
|
|
| Parking brake | Backing plate mounting bolt | 60 | 44 | Maximum |
|
|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Struts | Strut upper installation nut | 40 | 30 | Minimum |
|
|
| Struts | Strut upper installation nut | 50 | 37 | Maximum |
|
|
| Struts | Strut assembly to knuckle | 110 | 81 | Minimum |
|
|
| Struts | Strut assembly to knuckle | 130 | 96 | Maximum |
|
|
| Struts | Strut mounting self locking nut | 60 | 44 | Minimum |
|
|
| Struts | Strut mounting self locking nut | 70 | 52 | Maximum |
|
|
| Shock absorbers/shocks | Shock absorber upper mounting nut | 40 | 30 | Minimum |
|
|
| Shock absorbers/shocks | Shock absorber upper mounting nut | 50 | 37 | Maximum |
|
|
| Shock absorbers/shocks | Shock absorber lower mounting nut | 80 | 59 | Minimum |
|
|
| Shock absorbers/shocks | Shock absorber lower mounting nut | 100 | 74 | Maximum |
|
|
| Stabilizer bar | Stabilizer bar lower/upper bracket mounting bolt | 17 | 13 | Minimum |
|
|
| Stabilizer bar | Stabilizer bar lower/upper bracket mounting bolt | 26 | 19 | Maximum |
|
|
| Sway bar links/Stabilizer links | Stabilizer link to lower arm mounting nut | 35 | 26 | Minimum |
|
|
| Sway bar links/Stabilizer links | Stabilizer link to lower arm mounting nut | 45 | 33 | Maximum |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
Did you find the answer to your specific question?
👍 0 👎 0
