Suzuki Swift 1 (2004-2010) Torque Spec Settings
 
      By EurovisionNim - Own work, CC BY-SA 4.0
Below you'll find the tightening torques for the Suzuki Swift 1 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Suzuki Swift 1
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Oil drain plug | 39 | 29 | 
 |   | 
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2004 - 2010
- Generation: 1
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Sensor | Output shaft speed sensor (VSS) bolt | 5 | 4 | 
 |   | |
| Sensor | Input shaft speed sensor bolt | 8 | 6 | 
 |   | 
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Final gear bolt | 124 | 91 | 
 |   | |
| Clutch assembly | Clutch cover bolt | 19 | 14 | 
 |   | |
| Clutch assembly | Clutch stroke sensor screw | 2 | 1 | 
 |   | |
| Clutch assembly | Clutch actuator bolt | 15 | 11 | 
 |   | |
| Transmission fluid pan | Oil drain plug | 39 | 29 | 
 |   | |
| Transmission fluid pan | Oil level/filler plug | 39 | 29 | 
 |   | |
| Transmission mount/case | Transaxle case bolt | 29 | 21 | 
 |   | |
| Transfer | Shift and select actuator bolt | 18 | 13 | 
 |   | |
| Transfer | Shift selector mounting nut | 23 | 17 | 
 |   | |
| Transfer | Reverse gear shift lever bolt No.1 and No.2 | 17 | 13 | 
 |   | |
| Transfer | Shift lock solenoid screw | 2 | 1 | 
 |   | |
| Transfer | Low speed gear shift fork bolt | 16 | 12 | 
 |   | |
| Transfer | High speed gear shift fork bolt | 16 | 12 | 
 |   | |
| Drive/Axle shaft | Reverse shaft bolt | 29 | 21 | 
 |   | 
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | 
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | 
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | 
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | 
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | 
|---|
 
                  By EurovisionNim - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 5 👎 2
