Chevrolet Astro 2 (1995-2005) Torque Spec Settings

By IFCAR - Own work., Public Domain
Below you'll find the tightening torques for the Chevrolet Astro 2 in both Nm and ft/lbs. The first table contains the most-used torque settings. The second table contains all torque spec values I could find.
Most-Used Torque Settings for Astro 2
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Source |
---|---|---|---|---|---|
Wheel lug nuts | 135.6 | 100 |
![]() |
||
Oil sump plug / engine drain plug | 24.4 | 18 |
![]() |
||
Oil filter adaptor bolt | 20.3 | 15 |
![]() |
||
Caliper mounting bolts | 51 | 38 |
![]() |
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1995 - 2005
- Generation: 2
- Model variant: Base
- Also known as:
All Torque Settings in Tables
General torque settings
Nut | Torque (Nm) | Torque (ft/lbs) | Remarks | Source |
---|---|---|---|---|
Wheel lug nuts | 135.6 | 100 |
![]() |
|
Oil sump plug / engine drain plug | 24.4 | 18 |
![]() |
|
Oil pan bolts | 16 | 12 |
![]() |
|
Oil filter adaptor bolt | 20.3 | 15 |
![]() |
|
Cylinder head bolts | 20.3 | 15 | Step 1 |
![]() |
Intake manifold upper | 5 | 4 | Step 1 |
![]() |
Intake manifold upper | 9.9 | 7 | Step 2 |
![]() |
Intake manifold lower | 3.1 | 2 | Step 1 |
![]() |
Intake manifold lower | 12 | 9 | Step 2 |
![]() |
Intake manifold lower | 15 | 11 | Step 3 |
![]() |
Exhaust manifold bolts | 14.9 | 11 | Step 1 |
![]() |
Exhaust manifold bolts | 29.8 | 22 | Step 2 |
![]() |
Caliper mounting bolts | 51 | 38 |
![]() |
|
Upper control arm shaft to Frame nuts | 110 | 81 | RWD |
![]() |
Lower control arm to Frame nuts | 90 | 66 | RWD |
![]() |
Upper ball joint to Steering knuckle nut | 83 | 61 | RWD |
![]() |
Lower ball joint to Steering knuckle nut | 125 | 92 | RWD |
![]() |
Tie rod to Relay rod nut | 54 | 40 |
![]() |
|
Steering knuckle to Tie rod end nut | 47 | 35 | RWD |
![]() |
Shock absorber upper attaching nut | 20 | 15 | RWD |
![]() |
Shock absorber lower attaching screws | 25 | 18 | RWD |
![]() |
Pitman arm to Steering gear nut | 250 | 184 |
![]() |
|
Connecting rod to Pitman arm nut | 62 | 46 |
![]() |
|
Hub and bearing assembly bolts | 90 | 66 |
![]() |
|
Water pump bolt | 44.7 | 33 |
![]() |
|
Stabilizer shaft link nut or bolt | 17 | 13 |
![]() |
Did you find the answer to your specific question?
๐ 6 ๐ 6