Chrysler Voyager 3 (1996-2000) Torque Spec Settings
Below you'll find the tightening torques for the Chrysler Voyager 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The second table contains all torque spec values I could find.
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1996 - 2000
- Generation: 3
- Model variant: Base
- Also known as:
All Torque Settings in Tables
General torque settings
| Nut | Torque (Nm) | Torque (ft/lbs) | Remarks | Source |
|---|---|---|---|---|
| Wheel mounting lug nut | 135 | 100 | Maximum torque |
|
| Wheel mounting lug nut | 110 | 81 | Minimum torque |
|
| Lug nuts | 129 | 95 |
|
|
| Drain plug | 27 | 20 | For 2.4L engine, 3.3/3.8L engine, and 2.0L SOHC engine |
|
| Drain plug | 39 | 29 | For 3.0L engine |
|
| Oil pan drain plug | 54 | 40 | For 2.5L VM Diesel |
|
| Oil pan bolts | 12 | 9 | For 2.4L engine, 3.0L engine, 3.3/3.8L engine, 2.0L SOHC engine, and 2.5L VM Diesel |
|
| Oil filter | 20 | 15 | For 2.4L engine, 3.0L engine, and 2.0L SOHC engine |
|
| Oil filter | 9.8 | 7 | For 2.5L VM Diesel |
|
| Level sensor plug | 41 | 30 | For 3.3/3.8L engine |
|
| Cylinder head bolts | 34 | 25 | 1st step, For 2.4L engine, and 2.0L SOHC engine |
|
| Cylinder head bolts | 68 | 50 | 2nd step, For 2.4L engine, and 2.0L SOHC engine |
|
| Cylinder head bolts | 68 | 50 | 3rd step, For 2.4L engine, and 2.0L SOHC engine |
|
| Cylinder head bolts | 108 | 80 | For 3.0L engine |
|
| Cylinder head bolts | 61 | 45 | 1st step, For 3.3/3.8L engine |
|
| Cylinder head bolts | 88 | 65 | 2nd step, For 3.3/3.8L engine |
|
| Cylinder head bolts | 88 | 65 | 3rd step, For 3.3/3.8L engine |
|
| Cylinder head bolts | 30 | 22 | For 2.5L VM Diesel |
|
| Spark plugs | 28 | 21 | For 2.4L engine, 3.0L engine, and 2.0L SOHC engine |
|
| Spark plugs | 27 | 20 | For 3.3/3.8L engine |
|
| Intake manifold | 27 | 20 | For 2.4L engine, and 3.0L engine |
|
| Intake manifold | 23 | 17 | For 3.3/3.8L engine |
|
| Intake manifold | 12 | 9 | For 2.0L SOHC engine |
|
| Intake manifold mounting bolts | 30 | 22 | For 2.5L VM Diesel |
|
| Exhaust manifold to Cylinder head | 23 | 17 | For 2.4L engine, 3.0L engine, and 2.0L SOHC engine |
|
| Exhaust manifold bolts | 23 | 17 | For 3.3/3.8L engine |
|
| Exhaust manifold mounting nuts | 30 | 22 | For 2.5L VM Diesel |
|
| Engine mount bracket | 61 | 45 | For 2.4L engine, and 2.0L SOHC engine |
|
| Engine mount bracket | 41 | 30 | For 3.0L engine |
|
| Front engine mount support bracket | 68 | 50 | For 2.5L VM Diesel |
|
| Rear engine mount support bracket | 101 | 74 | For 2.5L VM Diesel |
|
| Knock sensor | 10 | 7 |
|
|
| Generator mounting bolts | 54 | 40 |
|
|
| Clutch pressure plate bolts | 27 | 20 |
|
|
| Camshaft sprocket | 101 | 74 | For 2.4L engine |
|
| Camshaft sprocket | 95 | 70 | For 3.0L engine |
|
| Camshaft sprocket | 54 | 40 | For 3.3/3.8L engine |
|
| Camshaft sprocket | 115 | 85 | For 2.0L SOHC engine |
|
| Disc brake caliper bolts | 22 | 16 |
|
|
| Lower control arm pivot bolt | 185 | 136 |
|
|
| Lower control arm rear bushing retainer bolt | 68 | 50 |
|
|
| Outer CV joint hub nut | 244 | 180 |
|
|
| Outer tie rod jam nuts | 75 | 55 |
|
|
| Tie rod end to Steering knuckle nut | 61 | 45 |
|
|
| Front strut to Steering knuckle | 90 | 66 |
|
|
| Standard shock absorber | 101 | 74 |
|
|
| Connecting rod cap | 27 | 20 | For 2.4L engine, 3.0L engine, and 2.0L SOHC engine |
|
| Connecting rod | 54 | 40 | For 3.3/3.8L engine |
|
| Connecting rod | 29.5 | 22 | For 2.5L VM Diesel |
|
| Power steering pump mounting nuts | 24.5 | 18 | For 2.5L VM Diesel |
|
| Hub and bearing assembly mounting bolts | 65 | 48 |
|
|
| Water pump mounting bolts | 12 | 9 | For 2.4L engine, 3.0L engine, and 2.0L SOHC engine |
|
| Water pump pulley bolts | 28 | 21 |
|
|
| Water pump pulley bolts | 27.5 | 20 | For 2.5L VM Diesel |
|
| Timing belt tensioner assembly | 61 | 45 | For 2.4L engine |
|
| Timing belt tensioner pulley assembly | 41 | 30 | For 3.0L engine |
|
| Timing belt mechanical tensioner assembly | 28 | 21 | For 2.0L SOHC engine |
|
| Timing belt hydraulic tensioner pulley bolt | 68 | 50 | For 2.0L SOHC engine |
|
| Power steering pulley nut | 170 | 125 | For 2.5L VM Diesel |
|
| Stabilizer bar link to Strut attaching nut | 88 | 65 |
|
Did you find the answer to your specific question?
👍 1 👎 4
