Jeep Cherokee 3 (2002-2007) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Jeep Cherokee 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Jeep Cherokee 3
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan drain plug | 27 | 20 |
|
|
|
| Oil filter | Oil filter | 20 | 15 |
|
|
|
| Spark plugs | Spark plugs | 18 | 13 |
|
|
|
| Transmission fluid pan | Drain plug | 30 | 22 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2002 - 2007
- Generation: 3
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan bolts | 12 | 9 |
|
|
|
| Oil pan | Oil pan drain plug | 27 | 20 |
|
|
|
| Oil filter | Oil filter | 20 | 15 |
|
|
|
| Oil pump | Oil pump to Block bolts | 28 | 21 |
|
|
|
| Oil pump | Oil pump cover plate bolts | 12 | 9 |
|
|
|
| Oil pump | Oil pump pickup tube bolt | 28 | 21 |
|
|
|
| Oil pump | Oil pump relief valve cap | 41 | 30 |
|
|
|
| Piston rods | Connecting rod cap bolts | 27 | 20 | Stage 1 |
|
|
| Cylinder head | Cylinder head bolts | 34 | 25 | Stage 1 |
|
|
| Cylinder head | Cylinder head bolts | 68 | 50 | Stage 2 |
|
|
| Cylinder head | Cylinder head bolts | 68 | 50 | Stage 3 |
|
|
| Cylinder head | Cylinder head cover bolts | 12 | 9 |
|
|
|
| Spark plugs | Spark plugs | 18 | 13 |
|
|
|
| Intake manifold | Intake manifold lower bolts | 28 | 21 |
|
|
|
| Engine mounts | Engine mount bracket right bolts | 61 | 45 |
|
|
|
| Camshaft | Camshaft sprocket bolt | 115 | 85 |
|
|
|
| Crankshaft | Crankshaft main bearing cap bolts | 28 | 21 | M8 bolts |
|
|
| Crankshaft | Crankshaft main bearing cap bolts | 75 | 55 | M11 bolts |
|
|
| Crankshaft | Crankshaft damper | 136 | 100 |
|
|
|
| Crankshaft | Balance shaft carrier to Block bolts | 54 | 40 |
|
|
|
| Crankshaft | Balance shaft gear cover fastener | 12 | 9 | Double ended |
|
|
| Crankshaft | Balance shaft sprocket bolt | 28 | 21 |
|
|
|
| Crankshaft | Balance shaft chain tensioner bolts | 12 | 9 |
|
|
|
| Crankshaft | Balance shaft carrier cover bolts | 12 | 9 |
|
|
|
| Belt tensioner/Timing chains | Timing belt covers bolts | 12 | 9 | Front covers to Rear covers |
|
|
| Belt tensioner/Timing chains | Timing belt covers bolts | 12 | 9 | Rear cover |
|
|
| Belt tensioner/Timing chains | Timing belt tensioner assembly bolts | 61 | 45 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Clutch pressure plate | Pressure plate bolts | 31 | 23 |
|
|
|
| Flywheel/Flex plate | Flywheel bolts | 81 | 60 |
|
|
|
| Flywheel/Flex plate | Flex plate to Crankshaft | 95 | 70 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold to Cylinder head bolts | 23 | 17 |
|
|
|
| Exhaust manifold | Exhaust manifold heat shield bolts | 12 | 9 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By OSX - Own work, Public Domain
Did you find the answer to your specific question?
👍 0 👎 0
