Jeep Grand Cherokee (2011-2022) Torque Spec Settings
Below you'll find the tightening torques for the Jeep Grand Cherokee in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Jeep Grand Cherokee
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Spark plugs | Spark plugs | 10 | 7 | Minimum |
|
|
Spark plugs | Spark plugs | 20 | 15 | Maximum |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2011 - 2022
- Generation: 4
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil sump | 54 | 40 | M10 |
|
|
Oil pan | Oil sump | 5 | 4 | M6 |
|
|
Oil pump | Oil pump | 28 | 21 |
|
||
Piston rods | Connecting rod bearing | 21 | 15 | First stage |
|
|
Cylinder head | Cylinder head screws | 54 | 40 | Screw 1 -10 |
|
|
Cylinder head | Cylinder head screws | 20 | 15 | Screw 11 - 15 |
|
|
Spark plugs | Spark plugs | 10 | 7 | Minimum |
|
|
Spark plugs | Spark plugs | 20 | 15 | Maximum |
|
|
Engine mounts | Engine bracket | 61 | 45 | On engine block |
|
|
Engine mounts | Engine mounting | 60 | 44 | On engine bracket |
|
|
Sensor | Knock sensor | 20 | 15 |
|
||
Alternator | Alternator | 65 | 48 | On the engine block |
|
|
Camshaft | Camshaft sensor | 12 | 9 |
|
||
Camshaft | Camshaft timing gear | 122 | 90 |
|
||
Crankshaft | Main bearing | 31 | 23 | M8 |
|
|
Crankshaft | Main bearing | 28 | 21 | M12 |
|
|
Crankshaft | Vibration damper | 250 | 184 |
|
||
Water pump | Coolant pump | 28 | 21 |
|
||
Belt tensioner | Auxiliary drive belt deflection pulley | 29 | 21 |
|
||
Belt tensioner | Auxiliary drive belt tensioner | 41 | 30 |
|
||
Belt tensioner | Timing case cover | 28 | 21 |
|
||
Valve cover | Valve cover | 8 | 6 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Power steering pump | Servo steering pump | 28 | 21 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust manifold | 31 | 23 |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Brake calliper mounting support | 120 | 89 |
|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 3 👎 13