Kia Sorento II (2010-2014) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Kia Sorento II in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Kia Sorento II
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil filter | 32 | 24 | Minimum |
|
|
| Oil pan | Oil filter | 40 | 30 | Maximum |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2010 - 2014
- Generation: Second
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil sump | 10 | 7 | M6, Minimum |
|
|
| Oil pan | Oil sump | 12 | 9 | M6, Maximum |
|
|
| Oil pan | Oil sump | 30 | 22 | M9, Minimum |
|
|
| Oil pan | Oil sump | 34 | 25 | M9, Maximum |
|
|
| Oil pan | Oil filter | 32 | 24 | Minimum |
|
|
| Oil pan | Oil filter | 40 | 30 | Maximum |
|
|
| Oil pan | Oil filter housing | 22 | 16 | Minimum |
|
|
| Oil pan | Oil filter housing | 26 | 19 | Maximum |
|
|
| Vacuum pump | Vacuum pump | 12 | 9 |
|
|
|
| Piston rods | Connecting rod bearing | 18 | 13 | Minimum |
|
|
| Piston rods | Connecting rod bearing | 22 | 16 | Maximum |
|
|
| Cylinder head | Cylinder head screws | 79 | 58 | First stage |
|
|
| Cylinder head | Cylinder head screws | 30 | 22 | Fourth stage, Minimum |
|
|
| Cylinder head | Cylinder head screws | 34 | 25 | Fourth stage, Maximum |
|
|
| Cylinder head | Cylinder head screws | 79 | 58 | First stage |
|
|
| Alternator | Auxiliary drive belt tensioner | 55 | 41 | Minimum |
|
|
| Alternator | Auxiliary drive belt tensioner | 65 | 48 | Maximum |
|
|
| Crankshaft | Main bearing | 29 | 21 | Bearing cap |
|
|
| Crankshaft | Main bearing | 10 | 7 | Bearing casing on first stage |
|
|
| Crankshaft | Main bearing | 20 | 15 | Bearing casing on second stage |
|
|
| Crankshaft | Bearing casing on third stage | 30 | 22 | Bearing casing on second stage |
|
|
| Fuel/Oil cooler | Oil cooler | 45 | 33 | Minimum |
|
|
| Fuel/Oil cooler | Oil cooler | 55 | 41 | Maximum |
|
|
| Air conditioning | Air-conditioning compressor bracket | 20 | 15 | M8, Minimum |
|
|
| Air conditioning | Air-conditioning compressor bracket | 30 | 22 | M8, Maximum |
|
|
| Air conditioning | Air-conditioning compressor bracket | 45 | 33 | M10, Minimum |
|
|
| Air conditioning | Air-conditioning compressor bracket | 55 | 41 | M10, Maximum |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold | 40 | 30 | Minimum |
|
|
| Exhaust manifold | Exhaust manifold | 45 | 33 | Maximum |
|
|
| Exhaust manifold | Exhaust manifold | 40 | 30 | Minimum |
|
|
| Exhaust manifold | Exhaust manifold | 45 | 33 | Maximum |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By M 93, CC BY-SA 3.0 de
Did you find the answer to your specific question?
👍 1 👎 4
