Mazda Tribute 1 (2001-2006) Torque Spec Settings
By Mr.choppers - Own work, CC BY-SA 3.0
Below you'll find the tightening torques for the Mazda Tribute 1 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Mazda Tribute 1
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Engine oil drain plug | 25 | 18 |
|
|
|
| Transmission fluid pan | Drain plug | 27 | 20 |
|
|
|
| Transmission fluid pan | Drain plug | 47 | 35 |
|
|
|
| Disc brake | Caliper mounting bolts | 35 | 26 |
|
|
|
| Wheels | Wheel lug nuts | 133 | 98 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2001 - 2006
- Generation: 1
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Engine oil drain plug | 25 | 18 |
|
|
|
| Oil pump | Oil pick-up pipe bolts | 10 | 7 |
|
|
|
| Piston rods | Connecting rod bearing cap bolts | 35 | 26 | Step 1 |
|
|
| Intake manifold | Intake manifold nuts and bolts | 18 | 13 |
|
|
|
| Throttle body | Throttle body to Intake manifold bolts | 7 | 5 |
|
|
|
| Engine block | Lower crankcase to Engine block | 30 | 22 |
|
|
|
| Sensor | Camshaft Position (CMP) sensor mounting bolt | 20 | 15 |
|
|
|
| Sensor | Crankshaft Position (CKP) sensor mounting bolt | 7 | 5 |
|
|
|
| Sensor | Knock sensor retaining nut | 20 | 15 |
|
|
|
| Camshaft | Camshaft sprocket bolts | 68 | 50 |
|
|
|
| Crankshaft | Crankshaft pulley bolt | 115 | 85 |
|
|
|
| Crankshaft | Main bearing caps | 25 | 18 | Step 1 |
|
|
| Fuel/Oil cooler | Engine oil cooler mounting bolt | 58 | 43 |
|
|
|
| Belt tensioner/Timing chains | Drivebelt tensioner bolts | 25 | 18 |
|
|
|
| Valve cover | Valve cover bolts | 9 | 7 |
|
|
|
| Fuel system | Fuel pulsation damper bolts | 6 | 4 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Flywheel bolts | 112 | 83 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Mr.choppers - Own work, CC BY-SA 3.0
Did you find the answer to your specific question?
👍 2 👎 0