SEAT Ibiza 4 (6J/6P) (2008-2017) Torque Spec Settings
Below you'll find the tightening torques for the SEAT Ibiza 4 (6J/6P) in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for SEAT Ibiza 4 (6J/6P)
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil drain plug | 15 | 11 |
|
||
Oil filter | Oil filter | 20 | 15 |
|
||
Oil filter | Oil filter | 20 | 15 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2008 - 2017
- Generation: Fourth
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil sump | 13 | 10 |
|
||
Oil pan | Oil drain plug | 15 | 11 |
|
||
Oil filter | Oil filter housing | 20 | 15 |
|
||
Oil filter | Oil separator | 9 | 7 |
|
||
Oil filter | Oil filter | 20 | 15 |
|
||
Oil filter | Oil filter | 20 | 15 |
|
||
Oil dipstick | Oil dipstick | 8 | 6 |
|
||
Vacuum pump | Vacuum pump to engine support | 20 | 15 |
|
||
Cylinder head | Cylinder head | 15 | 11 |
|
||
Engine block | Cylinder block | 30 | 22 |
|
||
Engine block | Cylinder block | 30 | 22 |
|
||
Engine mounts | Engine mounting | 40 | 30 |
|
||
Sensor | Coolant temperature sensor | 8 | 6 |
|
||
Sensor | Fuel pressure sensor | 100 | 74 |
|
||
Sensor | Exhaust gas temperature sender | 45 | 33 |
|
||
Sensor | Lamda Sensor | 55 | 41 |
|
||
Sensor | Heat shield of knock sensor | 12 | 9 |
|
||
Camshaft | Camhshaft toothed belt pulley | 20 | 15 |
|
||
Crankshaft | Crankshaft plug | 30 | 22 |
|
||
Water pump | Coolant pump | 20 | 15 |
|
||
Fuel system | Banjo bolt | 35 | 26 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheel hub assembly | Wheel hub | 120 | 89 |
|
||
Flywheel/Flex plate | Drive plate | 35 | 26 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Steering column | Steering column | 5 | 4 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Bleeder screw | 10 | 7 |
|
||
Disc brake | Brake caliper | 35 | 26 |
|
||
Brake line | Brake pipe | 14 | 10 |
|
||
Brake pedal | Brake pedal to mounting bracket | 25 | 18 |
|
||
ABS | ABS hydraulic unit | 14 | 10 |
|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Struts | Suspension strut | 60 | 44 |
|
||
Shock absorbers/shocks | Shock absorber | 30 | 22 |
|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 3 👎 12