Subaru Forester 1 (1998-2002) Torque Spec Settings
By OSX - Own work, Public Domain
Below you'll find the tightening torques for the Subaru Forester 1 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Subaru Forester 1
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Front differential drain plug | 44 | 32 |
|
|
|
| Differential | Rear differential drain plug | 49 | 36 | T-type |
|
|
| Differential | Rear differential drain plug | 34 | 25 | VA-type |
|
|
| Wheel hub assembly | Front axle nut | 186 | 137 |
|
|
|
| Transmission fluid pan | Drain plug | 44 | 32 |
|
|
|
| Wheels | Wheel nut | 88 | 65 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1998 - 2002
- Generation: 1
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug | 44 | 32 |
|
|
|
| Oil pan | Oil pan bolts | 5 | 4 |
|
|
|
| Oil pressure switch | Oil pressure switch | 25 | 18 |
|
|
|
| Oil pump | Oil pump to Bracket | 18 | 13 |
|
|
|
| Oil pump | Oil pump cover bolt | 5 | 4 |
|
|
|
| Oil pump | Oil pump case plug | 44 | 32 |
|
|
|
| Coolant expansion tank | Engine coolant reservoir tank bolt | 5 | 4 |
|
|
|
| Radiator | Radiator upper bracket bolts | 18 | 13 |
|
|
|
| Radiator | Radiator fan nuts | 3 | 2 |
|
|
|
| Radiator | Main fan shroud to Radiator bolt | 5 | 4 |
|
|
|
| Radiator | Sub fan shroud to Radiator bolt | 5 | 4 |
|
|
|
| Radiator | Main fan shroud bolt | 4 | 3 |
|
|
|
| Radiator | Sub fan shroud bolt | 4 | 3 |
|
|
|
| Radiator | ATF pipe bolt | 12 | 9 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Clutch assembly | Clutch cover bolt | 16 | 12 |
|
|
|
| Clutch assembly | Clutch release lever pivot | 16 | 12 |
|
|
|
| Clutch assembly | Master cylinder assembly | 8 | 6 | LHD model |
|
|
| Clutch assembly | Master cylinder assembly bracket nut | 18 | 13 | RHD model |
|
|
| Clutch assembly | Master cylinder push rod nut | 10 | 7 |
|
|
|
| Clutch assembly | Operating cylinder nut | 18 | 13 | LHD model |
|
|
| Clutch assembly | Operating cylinder bolt | 37 | 27 | RHD model |
|
|
| Clutch assembly | Operating cylinder | 8 | 6 | RHD model |
|
|
| Clutch assembly | Clutch pipe | 15 | 11 | RHD model |
|
|
| Drive/Axle shaft | Propeller shaft bolt | 52 | 38 | RHD model |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By OSX - Own work, Public Domain
Did you find the answer to your specific question?
👍 0 👎 0
