Subaru Forester 1 (1998-2002) Torque Spec Settings
By OSX - Own work, Public Domain
Below you'll find the tightening torques for the Subaru Forester 1 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Subaru Forester 1
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Front differential drain plug | 44 | 32 |
|
|
|
| Differential | Rear differential drain plug | 49 | 36 | T-type |
|
|
| Differential | Rear differential drain plug | 34 | 25 | VA-type |
|
|
| Wheel hub assembly | Front axle nut | 186 | 137 |
|
|
|
| Transmission fluid pan | Drain plug | 44 | 32 |
|
|
|
| Wheels | Wheel nut | 88 | 65 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1998 - 2002
- Generation: 1
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Sensor | Front and rear vehicle speed sensor | 7 | 5 |
|
|
|
| Sensor | Torque converter turbine speed sensor | 7 | 5 |
|
|
|
| Fuel/Oil cooler | Oil cooler outlet pipe | 25 | 18 |
|
|
|
| Radiator | ATF pipe bolt | 12 | 9 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Front differential drain plug | 44 | 32 |
|
|
|
| Flywheel/Flex plate | Drive plate reinforcement bolt | 72 | 53 |
|
|
|
| Flywheel/Flex plate | Drive plate | 72 | 53 |
|
|
|
| Flywheel/Flex plate | Torque converter clutch to Drive plate bolts | 25 | 18 |
|
|
|
| Transmission fluid pan | ATF drain plug | 25 | 18 |
|
|
|
| Transmission fluid pan | Oil pan | 25 | 18 |
|
|
|
| Transmission mount/case | Extension case to Transmission case | 25 | 18 |
|
|
|
| Transmission mount/case | Transmission control module | 8 | 6 | LHD model |
|
|
| Transmission mount/case | Transmission control module | 25 | 18 | RHD model |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Sway bar links/Stabilizer links | Stabilizer link to Front transverse link | 30 | 22 |
|
|
|
| Control arm | Lower arm to Knuckle arm of housing bolts | 49 | 36 |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By OSX - Own work, Public Domain
Did you find the answer to your specific question?
👍 0 👎 0
