Toyota HiAce 5 (2004-2019) Torque Spec Settings
Below you'll find the tightening torques for the Toyota HiAce 5 in both Nm and ft/lbs. The first table contains the most-used torque settings. The second table contains all torque spec values I could find.
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2004 - 2019
- Generation: 5
- Model variant: Base
- Also known as:
All Torque Settings in Tables
General torque settings
Nut | Torque (Nm) | Torque (ft/lbs) | Remarks | Source |
---|---|---|---|---|
Wheel lug nuts | 100 | 74 | ||
Engine drain plug | 8 | 6 | Engine 1KZ-TE | |
Oil pan to Cylinder block | 16 | 12 | Engine 1KZ-TE | |
Oil pan to Drain plug | 34 | 25 | Engine 1KZ-TE | |
Oil strainer to Cylinder block | 8 | 6 | Engine 1KZ-TE | |
Oil level gage guide to Intake manifold | 8 | 6 | Engine 2KD-FTV | |
Cylinder head cover | 9 | 7 | Engine 1KZ-TE | |
Cylinder head bolts | 39 | 29 | Engine 1KZ-TE | |
Intake manifold to Cylinder head | 29 | 21 | Engine 2KD-FTV | |
Intake manifold nut | 29 | 21 | Engine 1KZ-TE | |
Exhaust manifold to Cylinder head | 40 | 30 | Engine 2KD-FTV | |
Exhaust manifold to Cylinder block | 52 | 38 | Engine 1KZ-TE | |
Engine mounting bracket RH to Cylinder block | 68 | 50 | Engine 2KD-FTV | |
Engine mounting bracket LH to Cylinder block | 68 | 50 | Engine 2KD-FTV | |
Engine mounting bracket RH to Body | 38 | 28 | Engine 2KD-FTV | |
Engine mounting bracket LH to Body | 38 | 28 | Engine 2KD-FTV | |
Front engine hanger | 41 | 30 | Engine 1KZ-TE | |
Rear engine hanger | 20 | 15 | Engine 1KZ-TE | |
Generator bracket to Timing gear case cover | 25 | 18 | Engine 2KD-FTV | |
Generator bracket to Generator assembly | 25 | 18 | Engine 2KD-FTV | |
Alternator bracket to Cylinder block | 21 | 15 | Engine 1KZ-TE | |
Alternator to Alternator bracket | 21 | 15 | Engine 1KZ-TE, Lock bolt | |
Alternator to Alternator bracket | 62 | 46 | Engine 1KZ-TE, Pivot bolt | |
Camshaft position sensor to Timing gear case | 8.5 | 6 | Engine 2KD-FTV | |
Camshaft bearing cap bolts | 18 | 13 | Engine 1KZ-TE | |
Connecting rod cap to Connecting rod | 29 | 21 | Engine 1KZ-TE | |
V-ribbed belt tensioner assembly to Water pump assembly | 21 | 15 | Engine 2KD-FTV | |
Water pump to Cylinder block | 13 | 10 | Engine 1KZ-TE | |
Fan to Water pump pulley | 18 | 13 | Engine 1KZ-TE | |
V-ribbed belt tensioner assembly to Cylinder block | 21 | 15 | Engine 2KD-FTV | |
Timing belt tensioner to Cylinder block | 13 | 10 | Engine 2KD-FTV | |
Timing belt tensioner bolt | 13 | 10 | Engine 1KZ-TE | |
No.1 Camshaft timing pulley bolt | 98 | 72 | Engine 1KZ-TE | |
No.2 Camshaft timing pulley bolt | 13 | 10 | Engine 1KZ-TE | |
Timing belt idler pulley bolt | 34 | 25 | Engine 1KZ-TE |
Did you find the answer to your specific question?
👍 8 👎 30