Ford Crown Victoria 2 (1998-2012) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Ford Crown Victoria 2 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Ford Crown Victoria 2
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Wheel nuts | 135 | 100 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1998 - 2012
- Generation: 2
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Sensor | Output Shaft Speed (OSS) sensor bolt | 12 | 9 |
|
|
|
| Sensor | Turbine Shaft Speed (TSS) sensor bolt | 11 | 8 |
|
|
|
| Sensor | TR sensor bolts | 9 | 7 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Fluid cooler tube case fittings | 21 | 15 |
|
|
|
| Transmission fluid pan | Transmission filler tube bolt | 48 | 35 |
|
|
|
| Transmission fluid pan | Transmission fluid cooler tubes | 20 | 15 |
|
|
|
| Transmission fluid pan | Transmission fluid pan bolts | 14 | 10 |
|
|
|
| Transmission mount/case | Transmission retaining bolts | 48 | 35 |
|
|
|
| Transmission mount/case | Transmission support crossmember bolts | 70 | 52 |
|
|
|
| Transmission mount/case | Transmission inspection cover bolts | 35 | 26 |
|
|
|
| Transmission mount/case | Main control valve body bolts | 10 | 7 |
|
|
|
| Transmission mount/case | Valve body cover plate bolts | 10 | 7 |
|
|
|
| Transmission mount/case | Main control valve body reinforcement plates | 10 | 7 |
|
|
|
| Transmission adapter | Extension housing bolts and stud bolts | 55 | 41 |
|
|
|
| Torque converter | Torque Converter Clutch (TCC) solenoid bolt | 10 | 7 |
|
|
|
| Transfer | Manual control valve detent lever spring bolt | 10 | 7 |
|
|
|
| Transfer | Manual lever shaft inner nut | 32 | 24 |
|
|
|
| Transfer | Selector lever cable bracket | 14 | 10 |
|
|
|
| Transfer | Selector lever cable nut | 30 | 22 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By nakhon100 - Ford Crown Victoria, CC BY 2.0
Did you find the answer to your specific question?
👍 1 👎 5
