Ford Falcon 6 (1998-2008) Torque Spec Settings

Researched by Wan Wei Tay Engineer with a degree in mechanical engineering
Updated: November 26, 2023

OSX, Public domain, via Wikimedia Commons

Below you'll find the tightening torques for the Ford Falcon 6 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for Ford Falcon 6

Part	Description	Torque (Nm)	Torque (ft/lbs)	Applies to
Differential	Drain plug	30	22	BA Model Full Floating Axle Independent Rear Suspension (IRS)
Differential	Drain plug	30	22	BA Model Beam Axle
Disc brake	Rear brake caliper bolts	103	76	BA Model

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

Are these torque settings right for you?

Production years: 1998 - 2008
Generation: 6
Type of van: car
Model variant: Base
Also known as: Ford Fairmont FTE TE50 FTE TS50

All Torque Settings in Tables

engine torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Fuel system	Fuel tank retaining strap	28	21		BA Model

drivetrain torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

steering torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

exhaust torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

brakes torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

suspension torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Spring	Rear spring 'U' bolt nuts	60	44		BA Model Full Floating Axle Independent Rear Suspension (IRS)
Spring	Rear spring 'U' bolt nuts	60	44		BA Model Beam Axle