× Warning! The information on this page is in research. Data might not be accurate or verified.

Skoda Octavia 3 (5E) (2012-2019) Torque Spec Settings

Vauxford, CC BY-SA 4.0, via Wikimedia Commons

Below you'll find the tightening torques for the Skoda Octavia 3 (5E) in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque settings for Skoda Octavia 3 (5E)

Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Wheels Wheel bolts 120 89 Use wheel impact socket #17. Use a torque wrench.
unverified source
Wheels Wheel bolts 120 89 Use wheel impact socket #17. Use a torque wrench.
unverified source

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

Are these torque settings right for you?

  • Production years: 2012 - 2019
  • Generation: 3
  • Type of van: car
  • Model variant: Base

All Torque Settings in Tables

engine torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Engine mounts Engine mounting 40 30 Add 90°.
unverified source
Engine mounts Engine mounting to Engine support bracket 60 44 Add 90°.
unverified source
Engine mounts Engine support bracket 40 30 Add 90°.
unverified source
Engine mounts Gearbox mount (Screw A and B) 60 44 Add 90°.
unverified source
Engine mounts Gearbox mount (Screw C) 50 37 Add 90°.
unverified source
Engine mounts Pendulum support (Screw 1) 130 96 Add 90°.
unverified source
Engine mounts Pendulum support (Screw 2) 50 37 Add 90°.
unverified source
Engine mounts Pendulum support (Screw 3) 50 37 Add 90°.
unverified source
Alternator Alternator mounting bolt 23 17
unverified source
Crankshaft Crankshaft V-ribbed belt pulley 150 111 Add 180°.
unverified source
Flywheel Flywheel bolts 60 44 Add 90°.
unverified source
Belt tensioner/Timing chains Tnesioning device for V-ribbed belt 20 15 Add 90°.
unverified source

drivetrain torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Wheel hub assembly Wheel hub with wheel bearing 200 148 Add 180°.
unverified source

steering torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

exhaust torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

brakes torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Brake caliper Brake caliper 30 22
unverified source
Brake caliper Brake caliper self-locking screw 35 26
unverified source
Brake caliper Brake caliper to brake carrier 35 26 Always use new screws.
unverified source
Brake caliper Brake hose with banjo union and hollow screw 35 26
unverified source
Brake line Brake line to brake caliper 35 26
unverified source
Brake line Spring clip for brake line 8 6
unverified source
Brake line Brake lines to master brake cylinder 14 10
unverified source
Disc brake Brake disc screw 4.5 3
unverified source
Disc brake Brake pads 90 66 Add 90°.
unverified source
Master cylinder Master brake cylinder to brake servo unit 23 17
unverified source
ABS ABS hydraulic unit to bracket (screw) 8 6
unverified source
ABS ABS hydraulic unit bracket to body (nut) 20 15
unverified source
ABS ABS wheel speed sensor 8 6
unverified source

suspension torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Wheels Wheel bolts 120 89 Use wheel impact socket #17. Use a torque wrench.
unverified source
Wheels Wheel-bearing housing cover plate torx screw 12 9
unverified source
Wheels Wheel-bearing housing screw 200 148 Clean when using again.
unverified source
Wheels Axle stud to Cover plate 30 22 Add 90°.
unverified source

general torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

Did you find the answer to your specific question?
👍 0 👎 7