Ford Mustang 5 (2005-2014) Torque Spec Settings
By MercurySable99 - Own work, CC BY-SA 4.0
Below you'll find the tightening torques for the Ford Mustang 5 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Ford Mustang 5
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan drain plug | 26 | 19 |
|
|
|
| Spark plugs | Spark plugs | 15 | 11 |
|
|
|
| Transmission fluid pan | Drain plug | 27 | 20 |
|
|
|
| Transmission fluid pan | Drain plug | 27 | 20 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2014
- Generation: 5
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan drain plug | 26 | 19 |
|
|
|
| Oil pan | Oil pan fasteners | 2 | 1 | Stage 1 |
|
|
| Oil pan | Oil pan fasteners | 10 | 7 | Stage 2 |
|
|
| Oil filter | Engine oil filter | 16 | 12 |
|
|
|
| Oil filter | Oil filter adapter bolts | 20 | 15 | Stage 1 |
|
|
| Oil pressure switch | Engine Oil Pressure (EOP) | 14 | 10 |
|
|
|
| Oil feeder | Piston cooling jets bolts | 10 | 7 | Stage 1 |
|
|
| Oil pump | Oil pump fasteners | 10 | 7 | Stage 2, Bolt 1 |
|
|
| Oil pump | Oil pump fasteners | 25 | 18 | Stage 2, Stud bolt 2 |
|
|
| Oil pump | Oil pump fasteners | 10 | 7 | Stage 2, Bolt 3 |
|
|
| Oil pump | Oil pump fasteners | 20 | 15 | Stage 2, Stud bolt 4 |
|
|
| Oil pump | Oil pump screen and pickup tube spacer | 25 | 18 |
|
|
|
| Oil pump | Oil pump screen and pickup tube to Spacer bolt | 25 | 18 |
|
|
|
| Oil pump | Oil pump screen and pickup tube bolts | 10 | 7 | Stage 1 |
|
|
| Piston rods | Connecting rod bolts | 20 | 15 | Stage 1 |
|
|
| Piston rods | Connecting rod bolts | 38 | 28 | Stage 2 |
|
|
| Cylinder head | Cylinder head bolts | 25 | 18 | Stage 1 |
|
|
| Cylinder head | Cylinder head bolts | 40 | 30 | Stage 2 |
|
|
| Spark plugs | Spark plugs | 15 | 11 |
|
|
|
| Engine mounts | Engine front cover bolts | 25 | 18 | Stage 1, Bolts 1-15 |
|
|
| Engine mounts | Engine front cover bolts | 10 | 7 | Stage 1, Bolts 16-19 |
|
|
| Sensor | Camshaft position (CMP) sensor bolt | 10 | 7 |
|
|
|
| Sensor | Crankshaft position (CKP) sensor bolt | 10 | 7 |
|
|
|
| Sensor | Knock Sensor (KS) | 20 | 15 |
|
|
|
| Sensor | Cylinder Head Temperature (CHT) sensor | 11 | 8 |
|
|
|
| Alternator | Generator bolt and nut | 48 | 35 |
|
|
|
| Alternator | Generator B+ wire terminal nut | 17 | 13 |
|
|
|
| Battery | Ignition coil-on-plug bolt | 6 | 4 |
|
|
|
| Camshaft | Camshaft bearing cap and bolts | 6 | 4 | Stage 1 |
|
|
| Crankshaft | Crankshaft pulley bolt | 140 | 103 | Stage 1 |
|
|
| Crankshaft | Crankshaft pulley bolt | 100 | 74 | Stage 3 |
|
|
| Crankshaft | Crankshaft rear seal retainer bolts | 10 | 7 | Stage 1 |
|
|
| Crankshaft | Vertical main bearing cap fasteners | 20 | 15 | Stage 1, Fasteners 1 through 20 |
|
|
| Crankshaft | Vertical main bearing cap fasteners | 40 | 30 | Stage 2, Fasteners 1 through 10 |
|
|
| Crankshaft | Vertical main bearing cap fasteners | 65 | 48 | Stage 3, Fasteners 11 through 20 |
|
|
| Crankshaft | Cross-mounted main bearing cap fasteners | 10 | 7 | Stage 1 |
|
|
| Crankshaft | Cross-mounted main bearing cap fasteners | 30 | 22 | Stage 2 |
|
|
| Water pump | Coolant pump bolts | 20 | 15 |
|
|
|
| Water pump | Coolant pump pulley bolts | 20 | 15 |
|
|
|
| Radiator | Thermostat housing bolts | 10 | 7 |
|
|
|
| Air conditioning | A/C compressor stud bolts | 25 | 18 |
|
|
|
| Belt tensioner/Timing chains | Timing chain guide bolts | 10 | 7 |
|
|
|
| Belt tensioner/Timing chains | Primary timing chain tensioner bolts | 10 | 7 |
|
|
|
| Belt tensioner/Timing chains | Accessory drive belt tensioner bolt | 48 | 35 |
|
|
|
| Valve cover | Valve cover bolts | 10 | 7 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Flexplate bolts | 20 | 15 | Stage 1 |
|
|
| Flywheel/Flex plate | Flexplate inspection cover bolts | 35 | 26 |
|
|
|
| Transmission fluid pan | Transmission fluid cooler tube bracket to Flexplate inspection cover stud bolt nut | 13 | 10 |
|
|
|
| Transmission fluid pan | Transmission fluid cooler tube bracket to RH engine support insulator bracket stud bolt nut | 48 | 35 |
|
|
|
| Transmission mount/case | Transmission mount to Crossmember nut | 25 | 18 |
|
|
|
| Transmission mount/case | Engine to Transmission bolts and stud bolts | 48 | 35 |
|
|
|
| Torque converter | Torque converter nuts | 40 | 30 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold nuts | 24 | 18 | Stage 1 |
|
|
| Exhaust manifold | Exhaust manifold nuts | 32 | 24 | Stage 2 |
|
|
| Exhaust manifold | Exhaust manifold studs | 25 | 18 |
|
|
|
| Exhaust manifold | Exhaust manifold heat shield bolts | 12 | 9 |
|
|
|
| Catalytic converter | Catalytic converter to Exhaust manifold nuts | 40 | 30 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Aneekr - Own work, CC BY-SA 3.0
Did you find the answer to your specific question?
👍 0 👎 0
