Ford Mustang 5 (2005-2014) Torque Spec Settings
Below you'll find the tightening torques for the Ford Mustang 5 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Ford Mustang 5
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Drain plug | 27 | 20 |
|
||
Transmission fluid pan | Drain plug | 27 | 20 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2014
- Generation: 5
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Transmission cooler tube fitting to Case | 47 | 35 |
|
||
Transmission fluid pan | Transmission fluid filter screws | 10 | 7 |
|
||
Transmission fluid pan | Fluid level indicator plug to Drain pipe assembly | 10 | 7 |
|
||
Transmission fluid pan | Transmission fluid pan to Case screws | 11 | 8 |
|
||
Transmission fluid pan | Fluid pan drain plug | 26 | 19 |
|
||
Transmission fluid pan | Fill plug | 20 | 15 |
|
||
Transmission mount/case | Transmission mount to Extension housing screws | 90 | 66 |
|
||
Transmission mount/case | Transmission mount to Crossmember nuts | 90 | 66 |
|
||
Transmission mount/case | Transmission to Engine screws | 48 | 35 |
|
||
Transmission mount/case | Case to Center support bolt | 11 | 8 |
|
||
Torque converter | Torque converter to Flexplate nuts | 38 | 28 |
|
||
Torque converter | Torque converter adapter plate to Converter nuts | 38 | 28 |
|
||
Transfer | Extension housing screws | 30 | 22 |
|
||
Transfer | Manual control valve detent spring screw | 10 | 7 |
|
||
Transfer | Manual control lever shaft nut | 48 | 35 |
|
||
Transfer | Shift cable bracket screws | 40 | 30 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 0 👎 0