Land Rover Range Rover 2 (1994-2002) Torque Spec Settings
By OSX - Own work, Public Domain
Below you'll find the tightening torques for the Land Rover Range Rover 2 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Land Rover Range Rover 2
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1994 - 2002
- Generation: 2
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil sump drain plug | 45 | 33 |
|
|
|
| Oil pan | Oil sump drain plug | 32 | 24 |
|
|
|
| Oil pan | Oil sump to Cylinder block nuts/bolts | 23 | 17 |
|
|
|
| Oil pan | Oil sump to Bell housing bolts | 45 | 33 |
|
|
|
| Oil filter | Oil filter head adaptor | 13 | 10 |
|
|
|
| Oil pressure switch | Oil pressure switch to Timing cover | 15 | 11 |
|
|
|
| Oil pump | Oil pick-up strainer bolts | 8 | 6 |
|
|
|
| Oil pump | Oil pick-up strainer to Main bearing cap nut | 25 | 18 |
|
|
|
| Cylinder head | Cylinder head bolts | 20 | 15 | Stage 1 |
|
|
| Intake manifold | Coolant rail to Inlet manifold bolt | 22 | 16 |
|
|
|
| Intake manifold | Ram housing to Inlet manifold bolts | 24 | 18 |
|
|
|
| Intake manifold | Inlet manifold to Cylinder head bolts | 10 | 7 | Stage 1, Gasket clamp bolts |
|
|
| Intake manifold | Inlet manifold to Cylinder head bolts | 10 | 7 | Stage 2, Manifold bolts |
|
|
| Intake manifold | Inlet manifold to Cylinder head bolts | 50 | 37 | Stage 3, Manifold bolts |
|
|
| Intake manifold | Inlet manifold to Cylinder head bolts | 17 | 13 | Stage 4, Gasket clamp bolts |
|
|
| Engine mounts | Engine mounting nuts | 45 | 33 |
|
|
|
| Engine mounts | Engine mounting flange nuts | 45 | 33 |
|
|
|
| Engine mounts | Engine rear mounting to Gearbox bolts | 45 | 33 |
|
|
|
| Engine mounts | Gearbox cooler pipes to LH engine mounting bracket bolt | 18 | 13 |
|
|
|
| Sensor | Camshaft position sensor to Timing cover bolt | 8 | 6 |
|
|
|
| Sensor | Crankshaft position sensor to Cylinder block adaptor plate bolts | 6 | 4 |
|
|
|
| Sensor | Engine coolant temperature sensor to Manifold | 20 | 15 |
|
|
|
| Sensor | Intake air temperature sensor to Air cleaner | 8 | 6 |
|
|
|
| Sensor | Throttle position sensor clamp plate bolts | 2 | 1 |
|
|
|
| Sensor | Fuel temperature sensor to Fuel rail | 17 | 13 |
|
|
|
| Sensor | Heated oxygen sensor | 20 | 15 |
|
|
|
| Sensor | RH knock sensor to Cylinder block | 16 | 12 |
|
|
|
| Alternator | Alternator to Mounting bracket bolts | 25 | 18 |
|
|
|
| Alternator | Pulley to Alternator nut | 40 | 30 |
|
|
|
| Alternator | Engine harness to Alternator nuts - B+ terminal | 18 | 13 |
|
|
|
| Alternator | Engine harness to Alternator nuts - D+ terminal | 5 | 4 |
|
|
|
| Alternator | Earth lead to Alternator bracket bolt | 20 | 15 |
|
|
|
| Starter | Starter motor securing bolts | 45 | 33 |
|
|
|
| Battery | Ignition coil bracket to Inlet manifold nuts | 8 | 6 |
|
|
|
| Battery | Battery lead to Starter solenoid nut | 18 | 13 |
|
|
|
| Camshaft | Camshaft drive gear bolt | 50 | 37 |
|
|
|
| Crankshaft | Crankshaft pulley bolt | 270 | 199 |
|
|
|
| Common rail | Fuel pipe to Fuel rail union | 16 | 12 |
|
|
|
| Common rail | Fuel feed pipe to Fuel rail union | 16 | 12 |
|
|
|
| Water pump | Water pump bolts | 22 | 16 |
|
|
|
| Water pump | Pulley to Water pump bolts | 22 | 16 |
|
|
|
| Fuel/Oil cooler | Pipes to Engine oil cooler | 30 | 22 |
|
|
|
| Fuel/Oil cooler | Oil cooler pipes to Front cover | 15 | 11 |
|
|
|
| Radiator | Radiator drain plug | 6 | 4 |
|
|
|
| Radiator | Fan to Coupling bolts | 24 | 18 |
|
|
|
| Radiator | Fan assembly to Water pump | 56 | 41 |
|
|
|
| Air conditioning | Pipes to Air conditioning compressor bolts | 23 | 17 |
|
|
|
| Air conditioning | Pipes to Air conditioning condenser | 15 | 11 |
|
|
|
| Air conditioning | Compressor to Mounting bracket bolts | 22 | 16 |
|
|
|
| Belt tensioner/Timing chains | Timing cover bolts | 22 | 16 |
|
|
|
| Belt tensioner/Timing chains | Auxiliary drive belt tensioner bolt | 50 | 37 |
|
|
|
| Belt tensioner/Timing chains | Auxiliary drive belt tensioner bolt | 45 | 33 |
|
|
|
| Belt tensioner/Timing chains | Auxiliary drive belt idler pulley bolt | 50 | 37 |
|
|
|
| Belt tensioner/Timing chains | Auxiliary drive belt cover bolts | 18 | 13 |
|
|
|
| Valve cover | Rocker cover to Cylinder head bolts | 4 | 3 | Stage 1 |
|
|
| Valve cover | Rocker cover to Cylinder head bolts | 8 | 6 | Stage 2 |
|
|
| Valve cover | Rocker cover to Cylinder head bolts | 8 | 6 | Stage 3, Re-torque |
|
|
| Valve cover | Rocker cover to Cylinder head bolts | 3 | 2 | Stage 1 |
|
|
| Valve cover | Rocker cover to Cylinder head bolts | 7 | 5 | Stage 2 |
|
|
| Rocker arm | Rocker shaft to Cylinder head bolts | 38 | 28 |
|
|
|
| Fuel system | Fuel feed pipe to Filter | 20 | 15 |
|
|
|
| Fuel system | Fuel spill return pipe to Tank | 16 | 12 |
|
|
|
| Fuel system | Fuel feed and return pipes to Tank unit | 16 | 12 |
|
|
|
| Fuel system | Fuel hoses to Filter | 20 | 15 |
|
|
|
| Fuel system | Fuel pressure regulator to Fuel rail bolts | 10 | 7 |
|
|
|
| Fuel system | Fuel pressure regulator bolts | 10 | 7 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Clutch assembly | Clutch housing bolts | 40 | 30 |
|
|
|
| Clutch assembly | Slave cylinder to Clutch housing bolts | 45 | 33 |
|
|
|
| Flywheel/Flex plate | Flywheel to Crankshaft bolts | 80 | 59 |
|
|
|
| Flywheel/Flex plate | Drive plate clamp ring bolts | 45 | 33 |
|
|
|
| Flywheel/Flex plate | Cover to Flywheel bolts | 40 | 30 |
|
|
|
| Transfer | Manual gearbox harness bracket bolt | 6 | 4 |
|
|
|
| Transfer | Manual gear lever bolts | 25 | 18 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Power steering | PAS pump and compressor mounting bracket to Engine bolts | 40 | 30 |
|
|
|
| Power steering | PAS pump to Mounting bracket bolts | 18 | 13 |
|
|
|
| Power steering | PAS pump to Mounting bracket bolts | 22 | 16 |
|
|
|
| Power steering | Pulley to PAS pump bolts | 25 | 18 |
|
|
|
| Power steering | Feed hose to PAS pump union | 16 | 12 |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold to Cylinder head bolts | 55 | 41 |
|
|
|
| Exhaust manifold | Front exhaust pipe to Manifold nuts | 50 | 37 |
|
|
|
| Exhaust manifold | Front exhaust pipe to Manifold nuts | 30 | 22 |
|
|
|
| Exhaust manifold | Front exhaust pipe to Intermediate pipe nuts | 25 | 18 |
|
|
|
| Exhaust manifold | Tail pipe flange to Intermediate pipe flange nuts | 25 | 18 |
|
|
|
| Exhaust manifold | LH to RH tail pipe clamps | 65 | 48 |
|
|
|
| Exhaust manifold | RH tail pipe to LH tail pipe nut | 65 | 48 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Shock absorbers/shocks | RH shock absorber top mounting bolt | 85 | 63 |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By OSX - Own work, Public Domain
Did you find the answer to your specific question?
👍 0 👎 0
