Land Rover Range Rover 2 (1994-2002) Torque Spec Settings

Below you'll find the tightening torques for the Land Rover Range Rover 2 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for Land Rover Range Rover 2

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

---

All Torque Settings in Tables

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Sensor	Front height sensor retaining bolts	6	4		97 Model Year On
Sensor	Rear height sensor to Chassis bolts	6	4		97 Model Year On

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Pitman arm	Damper to Drag link nut and bolt	50	37		97 Model Year On

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Exhaust manifold	Tail pipe flange to Intermediate pipe flange nuts	25	18		97 Model Year On BMW Diesel Engine
Exhaust manifold	Tail pipe flange to Intermediate pipe flange nuts	25	18		97 Model Year On V8 Petrol Engine
Exhaust manifold	LH to RH tail pipe clamps	65	48		97 Model Year On V8 Petrol Engine
Exhaust manifold	RH tail pipe to LH tail pipe nut	65	48		97 Model Year On V8 Petrol Engine

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to