Torque Settings for Nissan Versa 1 (2006-2013)

Below you'll find the tightening torques for the Nissan Versa 1 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for Nissan Versa 1

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Transmission fluid pan	Drain plug	35	26		A/T
Wheels	Wheel nut	113	83

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

Are these torque settings right for you?

Production years: 2006 - 2013
Generation: 1
Type of van: car
Model variant: Base
Also known as: Nissan Tiida Latio Nissan Latio Nissan Tiida Venucia R50/D50

All Torque Settings in Tables

engine torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Applies to
Engine mounts	LH engine mount bracket (Transaxle side) bolt	65	48	RS6F94R
Engine mounts	LH engine mount bracket (Transaxle side) nut	60	44	RS6F94R
Engine mounts	Rear engine mounting bracket bolts	80	59	RS6F94R

drivetrain torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Differential	Final gear bolt	130	96		RS6F94R
Clutch assembly	Clutch housing drain plug	24	18		RS6F94R
Transmission fluid pan	Transaxle case filler plug	25	18		RS6F94R
Transmission mount/case	Transaxle assembly to Engine bolts	62	46		RS6F94R
Transmission mount/case	Transaxle case bolt	28	21		RS6F94R
Transmission mount/case	Transaxle case position switch	23	17		RS6F94R
Transmission adapter	Transaxle case bracket bolt	44	32		RS6F94R
Transfer	Control device assembly adapter plate bolts	25	18		RS6F94R
Transfer	Shift cable bracket bolt	35	26		RS6F94R
Drive/Axle shaft	Input shaft bolt	100	74	Step 1	RS6F94R
Drive/Axle shaft	Input shaft bolt	165	122	Step 2	RS6F94R
Drive/Axle shaft	Reverse idler shaft bolt	30	22		RS6F94R