Skoda Octavia 1 (1U) (1996-2010) Torque Spec Settings
Below you'll find the tightening torques for the Skoda Octavia 1 (1U) in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Skoda Octavia 1 (1U)
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil drain plug | 40 | 30 |
|
||
Oil filter | Oil filter | 20 | 15 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1996 - 2010
- Generation: 1
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil drain plug | 40 | 30 |
|
||
Oil pan | Oil pan bolt | 15 | 11 |
|
||
Oil pan | Baffle plate bolt | 15 | 11 |
|
||
Oil filter | Oil filter | 20 | 15 |
|
||
Oil filter | Oil filter holder bolt | 15 | 11 | Step 1 |
|
|
Oil pressure switch | Oil pressure switch | 25 | 18 |
|
||
Oil feeder | Oil spray nozzle pressure relief valve | 27 | 20 |
|
||
Oil pump | Oil pump bolts | 15 | 11 |
|
||
Oil pump | Oil pump chain sprocket bolt | 20 | 15 |
|
||
Piston rods | Conrod bearing cap nuts | 30 | 22 | Step 1 |
|
|
Cylinder head | Cylinder head bolts | 40 | 30 | 1st stage |
|
|
Cylinder head | Cylinder head cover to Cylinder head | 10 | 7 |
|
||
Engine block | Cylinder block securing nut | 40 | 30 |
|
||
Engine mounts | Engine mounting bolts | 40 | 30 | Bolts 1, Step 1 |
|
|
Engine mounts | Engine mounting bolt | 25 | 18 | Bolt 2 |
|
|
Engine mounts | Engine mounting bolt | 100 | 74 | Bolt 3 |
|
|
Camshaft | Camshaft bearing cap bolts | 10 | 7 |
|
||
Camshaft | Camshaft sprocket bolt | 65 | 48 |
|
||
Crankshaft | Crankshaft toothed belt sprocket central bolt | 90 | 66 |
|
||
Crankshaft | Crankshaft bearing cap bolts | 65 | 48 | Step 1 |
|
|
Crankshaft | Crankshaft vibration damper | 25 | 18 |
|
||
Coolant expansion tank | Coolant expansion reservoir and PAS reservoir screw | 10 | 7 |
|
||
Radiator | Fan shroud and radiator mounts bolts | 10 | 7 |
|
||
Air conditioning | Condenser and brackets for refrigerant pipes | 10 | 7 |
|
||
Belt tensioner/Timing chains | Tensioning pulley | 45 | 33 |
|
||
Belt tensioner/Timing chains | Chain tensioner with tensioning rail | 25 | 18 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Flywheel/Flex plate | Flywheel/Drive plate bolt | 60 | 44 |
|
||
Flywheel/Flex plate | Driven plate to Torque converter | 60 | 44 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Power steering | Hydraulic pump belt pulley bolt | 25 | 18 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust manifold to Cylinder head nuts | 25 | 18 |
|
||
Exhaust manifold | Shield to Exhaust manifold | 25 | 18 |
|
||
Muffler | Front and rear silencer hanger bolts | 25 | 18 |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Brake pedal | Accelerator pedal | 20 | 15 |
|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 2 👎 0