- Your #1 online resource for torque specs
By Kevauto - Own work, CC BY-SA 4.0
Below you'll find the tightening torques for the Toyota Tacoma 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan drain plug to No.2 oil pan sub-assembly | 38 | 28 |
|
|
|
| Oil pan | Oil pan sub-assembly to Cylinder block | 26 | 19 |
|
|
|
| Oil pan | No.2 oil pan sub-assembly to Oil pan sub-assembly | 9 | 7 |
|
|
|
| Oil pan | Oil pan stud bolt | 3 | 2 |
|
|
|
| Oil pan | Oil pan cover silencer to No.2 oil pan sub-assembly | 7 | 5 |
|
|
|
| Oil filter | Oil filter to Oil filter bracket | 17 | 13 |
|
|
|
| Oil filter | Oil filter bracket to Cylinder block | 25 | 18 |
|
|
|
| Oil filter | Oil filter bracket to Screw plug | 49 | 36 |
|
|
|
| Oil filter | Oil filter union to Oil filter bracket | 43 | 32 |
|
|
|
| Oil filter | Oil filter bracket union to Cylinder block | 25 | 18 |
|
|
|
| Oil filter | Oil strainer sub-assembly to Oil pan sub-assembly | 10 | 7 |
|
|
|
| Oil pressure switch | Engine oil pressure switch to Cylinder block | 15 | 11 |
|
|
|
| Oil dipstick | Oil level dipstick guide to Front no.1 engine mounting bracket | 20 | 15 |
|
|
|
| Oil pump | Oil pump cover to Timing chain cover bolt | 9 | 7 |
|
|
|
| Oil pump | Oil pump cover to Timing chain cover screw | 10 | 7 |
|
|
|
| Oil pump | Oil pump relief valve plug to Timing chain cover | 49 | 36 |
|
|
|
| Piston rods | Connecting rod to Connecting rod cap | 25 | 18 | Step 1 |
|
|
| Cylinder head | Cylinder head to Cylinder block | 39 | 29 | Step 1 |
|
|
| Cylinder head | No.1 head straight screw plug to Cylinder head | 44 | 32 |
|
|
|
| Cylinder head | No.2 head straight screw plug to Cylinder head | 140 | 103 |
|
|
|
| Cylinder head | Engine wire to Cylinder head bolt | 19 | 14 | Bolt A |
|
|
| Cylinder head | Engine wire to Cylinder head bolt | 14 | 10 | Bolt B |
|
|
| Cylinder head | Cylinder head cover sub-assembly to Cylinder head assembly | 9 | 7 |
|
|
|
| Spark plugs | Spark plug to Cylinder head | 18 | 13 |
|
|
|
| Intake manifold | Intake manifold to Cylinder block sub-assembly | 25 | 18 |
|
|
|
| Intake manifold | Intake pipe insulator to Air switching valve assembly | 20 | 15 |
|
|
|
| Intake manifold | Intake pipe insulator to Cylinder head sub-assembly | 20 | 15 |
|
|
|
| Intake manifold | Purge VSV to Intake manifold | 9 | 7 |
|
|
|
| Intake manifold | Air pump assembly to Body | 18 | 13 |
|
|
|
| Intake manifold | Heater hose bracket to Intake manifold | 19 | 14 |
|
|
|
| Intake manifold | Intake air connector to Intake manifold | 8 | 6 |
|
|
|
| Intake manifold | Intake air connector to Throttle body with motor assembly | 5 | 4 |
|
|
|
| Intake manifold | Wiring harness clamp bracket to Intake manifold | 8 | 6 |
|
|
|
| Throttle body | Throttle body with motor assembly to Intake manifold | 10 | 7 |
|
|
|
| Engine block | Water drain cock plug to Cylinder block water drain cock | 13 | 10 |
|
|
|
| Engine block | Cylinder block water drain cock to Cylinder block | 25 | 18 |
|
|
|
| Engine block | Engine oil seal retainer to Cylinder block | 13 | 10 |
|
|
|
| Engine block | No.1 oil nozzle to Cylinder block | 7 | 5 |
|
|
|
| Engine block | No.1 chain vibration damper to Cylinder head assembly and cylinder block | 21 | 15 |
|
|
|
| Engine block | No.2 chain vibration damper to Cylinder block | 27 | 20 |
|
|
|
| Engine block | No.3 chain vibration damper to Cylinder block | 18 | 13 |
|
|
|
| Engine block | No.4 chain vibration damper to Cylinder block | 18 | 13 |
|
|
|
| Engine block | No.1 compressor mounting bracket to Engine assembly | 43 | 32 | Bolt A |
|
|
| Engine block | No.1 compressor mounting bracket to Engine assembly | 43 | 32 | Bolt B |
|
|
| Engine block | No.1 compressor mounting bracket to Engine assembly | 21 | 15 | Bolt C |
|
|
| Engine mounts | No.1 engine mounting bracket to Cylinder block | 51 | 38 |
|
|
|
| Engine mounts | Front no.1 engine mounting bracket to Body | 50 | 37 |
|
|
|
| Engine mounts | No.1 engine hanger to Cylinder head | 42 | 31 |
|
|
|
| Engine mounts | No.1 engine under cover to Body | 30 | 22 |
|
|
|
| Sensor | Camshaft position sensor to Timing chain cover sub-assembly | 10 | 7 | For intake side |
|
|
| Sensor | Camshaft position sensor to Cylinder head cover sub-assembly | 10 | 7 | For exhaust side |
|
|
| Sensor | Crankshaft position sensor to Timing chain cover sub-assembly | 9 | 7 |
|
|
|
| Sensor | Engine coolant temperature sensor to Cylinder block | 20 | 15 |
|
|
|
| Sensor | Knock sensor to Cylinder block sub-assembly | 20 | 15 |
|
|
|
| Sensor | Air fuel ratio sensor to Front exhaust pipe assembly | 44 | 32 |
|
|
|
| Sensor | Heated oxygen sensor to Tail exhaust pipe assembly | 44 | 32 |
|
|
|
| Alternator | Generator assembly to Timing chain cover | 43 | 32 |
|
|
|
| Alternator | Generator assembly to Engine wire | 10 | 7 |
|
|
|
| Alternator | Retainer plate to Generator drive end frame | 2 | 1 |
|
|
|
| Alternator | Generator coil assembly to Generator drive end frame | 6 | 4 |
|
|
|
| Alternator | Generator brush holder assembly to Generator rectifier end frame | 2 | 1 |
|
|
|
| Alternator | Rear end cover to Generator rectifier end frame | 5 | 4 |
|
|
|
| Alternator | Generator pulley with clutch to Generator rotor assembly | 80 | 59 |
|
|
|
| Starter | Starter assembly to Transmission housing assembly | 37 | 27 |
|
|
|
| Starter | Lead wire to Terminal C | 10 | 7 |
|
|
|
| Starter | Starter wire to Starter assembly | 10 | 7 |
|
|
|
| Battery | Negative battery terminal to Battery | 5 | 4 |
|
|
|
| Battery | Ignition coil assembly to Cylinder head cover sub-assembly | 9 | 7 |
|
|
|
| Camshaft | Camshaft timing gear to Camshaft | 78 | 58 |
|
|
|
| Camshaft | Camshaft bearing cap to Cylinder head | 16 | 12 |
|
|
|
| Camshaft | Cylinder head cover connector sub-assembly to Camshaft bearing cap | 10 | 7 |
|
|
|
| Camshaft | Camshaft timing oil control valve assembly to Cylinder head sub-assembly | 9 | 7 |
|
|
|
| Crankshaft | Crankshaft to Cylinder block | 39 | 29 | Step 1 |
|
|
| Crankshaft | Crankshaft pulley to Crankshaft | 260 | 192 |
|
|
|
| Crankshaft | No.1 balanceshaft to Cylinder block | 18 | 13 |
|
|
|
| Crankshaft | No.2 balanceshaft to Cylinder block | 18 | 13 |
|
|
|
| Crankshaft | No.1 balanceshaft driven gear to No.1 balanceshaft | 36 | 27 |
|
|
|
| Crankshaft | No.2 balanceshaft driven gear to No.2 balanceshaft | 36 | 27 |
|
|
|
| Crankshaft | Balanceshaft drive gear to Cylinder block | 25 | 18 |
|
|
|
| Water pump | Engine water pump assembly to Timing chain cover | 9 | 7 |
|
|
|
| Water pump | Water pump assembly to Timing chain cover bolt | 25 | 18 | Bolt A |
|
|
| Water pump | Water pump assembly to Timing chain cover bolt | 9 | 7 | Bolt B |
|
|
| Water pump | Fan with fluid coupling to Water pump assembly | 25 | 18 |
|
|
|
| Fuel/Oil cooler | Oil cooler assembly to Body | 6 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler bracket to Oil cooler assembly | 6 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube to Body | 28 | 21 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube to Body | 28 | 21 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube clamp to Engine assembly bolt | 14 | 10 | Bolt A |
|
|
| Fuel/Oil cooler | Oil cooler tube clamp to Engine assembly bolt | 28 | 21 | Bolt B |
|
|
| Fuel/Oil cooler | Oil cooler tube clamp to Engine assembly bolt | 14 | 10 | Bolt A |
|
|
| Fuel/Oil cooler | Oil cooler tube clamp to Engine assembly bolt | 28 | 21 | Bolt B |
|
|
| Fuel/Oil cooler | Oil cooler tube clamp to Oil cooler tube clamp | 6 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube clamp to Oil cooler tube clamp | 6 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube union to Automatic transmission case sub-assembly | 29 | 21 | Without SST |
|
|
| Fuel/Oil cooler | Oil cooler tube union to Automatic transmission case sub-assembly | 25 | 18 | With SST |
|
|
| Fuel/Oil cooler | Oil cooler tube union to Automatic transmission case sub-assembly | 29 | 21 | Without SST |
|
|
| Fuel/Oil cooler | Oil cooler tube union to Automatic transmission case sub-assembly | 25 | 18 | With SST |
|
|
| Fuel/Oil cooler | No.1 oil cooler inlet tube and No.1 oil cooler outlet tube to Automatic transmission | 34 | 25 | Without union nut wrench |
|
|
| Fuel/Oil cooler | No.1 oil cooler inlet tube and No.1 oil cooler outlet tube to Automatic transmission | 29 | 21 | With union nut wrench |
|
|
| Fuel/Oil cooler | No.1 oil cooler inlet tube and No.1 oil cooler outlet tube to Automatic transmission assembly | 34 | 25 | Without union nut wrench |
|
|
| Fuel/Oil cooler | No.1 oil cooler inlet tube and No.1 oil cooler outlet tube to Automatic transmission assembly | 29 | 21 | With union nut wrench |
|
|
| Fuel/Oil cooler | Flexible hose clamp to Automatic transmission assembly | 14 | 10 |
|
|
|
| Fuel/Oil cooler | Flexible hose clamp to Automatic transmission assembly | 14 | 10 |
|
|
|
| Radiator | Radiator assembly to Body | 18 | 13 |
|
|
|
| Radiator | Fan shroud to Radiator assembly | 6 | 4 |
|
|
|
| Radiator | Fluid coupling assembly to Fan | 10 | 7 |
|
|
|
| Radiator | Water inlet to Timing chain cover sub-assembly | 28 | 21 |
|
|
|
| Air conditioning | Cooler compressor to No.1 compressor mounting bracket | 21 | 15 |
|
|
|
| Belt tensioner/Timing chains | No.1 chain tensioner assembly to Cylinder head assembly | 10 | 7 |
|
|
|
| Belt tensioner/Timing chains | No.2 chain tensioner assembly to Cylinder block | 18 | 13 |
|
|
|
| Belt tensioner/Timing chains | No.1 idler pulley to Timing chain cover sub-assembly | 43 | 32 |
|
|
|
| Belt tensioner/Timing chains | V-ribbed belt tensioner assembly to Cylinder block sub-assembly bolt | 40 | 30 | Bolt A |
|
|
| Belt tensioner/Timing chains | V-ribbed belt tensioner assembly to Cylinder block sub-assembly bolt | 23 | 17 | Bolt B |
|
|
| Belt tensioner/Timing chains | Timing chain guide to Cylinder head assembly | 10 | 7 |
|
|
|
| Belt tensioner/Timing chains | Timing chain cover to Cylinder head and cylinder block bolt | 57 | 42 | Bolt A |
|
|
| Belt tensioner/Timing chains | Timing chain cover to Cylinder head and cylinder block bolt and nut | 23 | 17 | Bolt B and nut |
|
|
| Belt tensioner/Timing chains | Timing chain cover to Cylinder head and cylinder block bolt | 21 | 15 | Bolt C |
|
|
| Belt tensioner/Timing chains | Timing chain cover to Cylinder head and cylinder block bolt | 25 | 18 | Bolt D |
|
|
| Belt tensioner/Timing chains | Timing chain cover plate to Timing chain cover sub-assembly | 9 | 7 |
|
|
|
| Belt tensioner/Timing chains | Timing chain cover to Water inlet | 20 | 15 |
|
|
|
| Belt tensioner/Timing chains | Vane pump to Timing chain cover | 21 | 15 |
|
|
|
| Belt tensioner/Timing chains | Suction hose to Timing chain cover | 8 | 6 |
|
|
|
| PCM | ECM bracket to ECM | 3 | 2 |
|
|
|
| PCM | No.2 ECM bracket to ECM | 3 | 2 |
|
|
|
| PCM | ECM to Instrument panel reinforcement assembly | 5 | 4 |
|
|
|
| Fuel system | Fuel delivery pipe to Cylinder head | 12 | 9 |
|
|
|
| Fuel system | Fuel delivery pipe to Fuel pressure pulsation damper assembly | 9 | 7 |
|
|
|
| Fuel system | Fuel delivery pipe to Fuel pressure regulator assembly | 9 | 7 |
|
|
|
| Fuel system | Fuel tank to Body | 62 | 46 |
|
|
|
| Fuel system | Fuel tank protector sub-assembly no.1 to Body | 20 | 15 | W/ off road package |
|
|
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Flywheel to Crankshaft | 27 | 20 | Step 1 |
|
|
| Flywheel/Flex plate | Drive plate and ring gear to Crankshaft | 74 | 55 |
|
|
|
| Transmission fluid pan | Automatic transmission assembly to Engine assembly | 37 | 27 | Bolt A |
|
|
| Transmission fluid pan | Automatic transmission assembly to Engine assembly | 71 | 52 | Bolt B |
|
|
| Transmission fluid pan | Automatic transmission assembly to Engine assembly | 37 | 27 | Bolt A |
|
|
| Transmission fluid pan | Automatic transmission assembly to Engine assembly | 71 | 52 | Bolt B |
|
|
| Transmission fluid pan | Transmission breather bracket to Automatic transmissiona assembly | 7 | 5 |
|
|
|
| Transmission fluid pan | Transmission breather bracket to Automatic transmissiona assembly | 7 | 5 |
|
|
|
| Transmission fluid pan | Transmission control cable assembly to Transmission control shaft lever LH | 14 | 10 |
|
|
|
| Transmission fluid pan | Transmission control cable assembly to Transmission control shaft lever LH | 14 | 10 |
|
|
|
| Transmission fluid pan | Transmission control cable bracket to Automatic transmission assembly | 28 | 21 |
|
|
|
| Transmission fluid pan | Transmission control cable bracket to Automatic transmission assembly | 28 | 21 |
|
|
|
| Transmission fluid pan | Transmission oil pan heat insulator to Automatic transmission assembly | 14 | 10 |
|
|
|
| Transmission fluid pan | Transmission oil pan heat insulator to Automatic transmission assembly | 14 | 10 |
|
|
|
| Transmission fluid pan | Wire harness clamp bracket to Automatic transmission assembly | 8 | 6 |
|
|
|
| Transmission fluid pan | Wire harness clamp bracket to Automatic transmission assembly | 8 | 6 |
|
|
|
| Transmission mount/case | Manifold stay to Automatic transmission assembly | 30 | 22 | Bolt A |
|
|
| Transmission mount/case | Manifold stay to Automatic transmission assembly | 44 | 32 | Bolt B |
|
|
| Transmission mount/case | Manifold stay to Automatic transmission assembly | 71 | 52 | Bolt C |
|
|
| Transmission mount/case | Manifold stay to Automatic transmission assembly | 30 | 22 | Bolt A |
|
|
| Transmission mount/case | Manifold stay to Automatic transmission assembly | 44 | 32 | Bolt B |
|
|
| Transmission mount/case | Manifold stay to Automatic transmission assembly | 71 | 52 | Bolt C |
|
|
| Torque converter | Drive plate and torque converter assembly setting bolt to Torque converter assembly | 48 | 35 |
|
|
|
| Torque converter | Drive plate and torque converter assembly setting bolt to Torque converter assembly | 48 | 35 |
|
|
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold to Cylinder head assembly | 36 | 27 |
|
|
|
| Exhaust manifold | Manifold stay to Exhaust manifold | 30 | 22 | Bolt A |
|
|
| Exhaust manifold | Manifold stay to Exhaust manifold | 44 | 32 | Bolt B |
|
|
| Exhaust manifold | Manifold stay to Exhaust manifold | 71 | 52 | Bolt C |
|
|
| Exhaust manifold | Manifold stay to Exhaust manifold | 30 | 22 | Bolt A |
|
|
| Exhaust manifold | Manifold stay to Exhaust manifold | 44 | 32 | Bolt B |
|
|
| Exhaust manifold | Manifold stay to Exhaust manifold | 71 | 52 | Bolt C |
|
|
| Exhaust manifold | Exhaust pipe assembly front to Exhaust manifold | 43 | 32 |
|
|
|
| Exhaust manifold | Exhaust pipe assembly front to Exhaust pipe assembly tail | 48 | 35 |
|
|
|
| Exhaust manifold | No.1 exhaust manifold heat insulator to Exhaust manifold | 12 | 9 |
|
|
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| ABS | ABS wire harness bracket to Charcoal canister | 13 | 10 |
|
|
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Kevauto - Own work, CC BY-SA 4.0
