Volkswagen Crafter 2 (2017-on) Torque Spec Settings
Below you'll find the tightening torques for the Volkswagen Crafter 2 in both Nm and ft/lbs. The first table contains the most-used torque settings. The second table contains all torque spec values I could find.
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2017 - present
- Generation: 2
- Model variant: Base
- Also known as:
All Torque Settings in Tables
General torque settings
| Nut | Torque (Nm) | Torque (ft/lbs) | Remarks | Source |
|---|---|---|---|---|
| Wheel bolt to wheel hub | 200 | 148 | Single wheel |
|
| Wheel bolt to wheel hub | 200 | 148 | Super single wheel |
|
| Wheel nut to wheel hub | 180 | 133 | Twin wheels |
|
| Oil drain plug | 30 | 22 | Transverse engine |
|
| Oil filter housing | 20 | 15 | Transverse engine |
|
| Oil level and oil temperature sender bolts | 8 | 6 | Transverse engine |
|
| Cylinder head bolts | 30 | 22 | Transverse engine, Stage 1 |
|
| Cylinder head bolts | 70 | 52 | Transverse engine, Stage 2 |
|
| Intake manifold bolts | 20 | 15 | Transverse engine |
|
| Engine mounting bolts | 70 | 52 | Transverse engine |
|
| Knock sensor bolt | 20 | 15 | Transverse engine |
|
| Wheel bearing housing bolts | 180 | 133 | Front brake |
|
| Rear axle bolts | 100 | 74 | Single wheel |
|
| Rear axle bolts | 70 | 52 | Twin wheels |
|
| Alternator bolts | 20 | 15 |
|
|
| Cover to camshaft case bolts | 8 | 6 | Transverse engine |
|
| Brake caliper bolt | 9.5 | 7 | Front brake |
|
| Brake caliper bolt | 30 | 22 | Rear brake, single tyre |
|
| Brake caliper bolt | 65 | 48 | Rear brake, twin tyres |
|
| Upper suspension strut mounting nuts | 50 | 37 |
|
|
| Lower suspension link bolts | 180 | 133 |
|
|
| Shock absorbers bolt | 130 | 96 | Single tyre |
|
| Shock absorbers bolt | 70 | 52 | Single tyre |
|
| Shock absorbers bolt | 130 | 96 | Twin tyres |
|
| Shock absorbers bolt | 130 | 96 | Twin tyres |
|
| Connecting rod bolts | 30 | 22 | Transverse engine |
|
| Coolant pump bolts | 20 | 15 | Transverse engine |
|
| Spacer bolts | 130 | 96 | Front brake |
|
| Tensioning device for poly V-belt bolt | 50 | 37 | Transverse engine |
|
| Tensioning pulley nut | 20 | 15 | Transverse engine |
|
| Anti-roll bar bolts | 110 | 81 | Transverse engine |
|
| Anti-roll bar bolts | 110 | 81 | Longitudinal engine |
|
Did you find the answer to your specific question?
👍 3 👎 16
