Jeep Grand Cherokee 3 (2005-2010) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Jeep Grand Cherokee 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Jeep Grand Cherokee 3
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan drain plug | 34 | 25 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2010
- Generation: 3
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan bolts | 12 | 9 |
|
|
|
| Oil pan | Oil pan drain plug | 34 | 25 |
|
|
|
| Oil dipstick | Oil dipstick tube | 12 | 9 |
|
|
|
| Oil pump | Oil pump attaching bolts | 28 | 21 |
|
|
|
| Oil pump | Oil pump pickup tube bolt and nut | 28 | 21 |
|
|
|
| Piston rods | Connecting rod cap bolts | 27 | 20 | Stage 1 |
|
|
| Cylinder head | Cylinder head bolts | 20 | 15 | M8 Bolts, Step 1 |
|
|
| Cylinder head | Cylinder head bolts | 34 | 25 | M8 Bolts, Step 2 |
|
|
| Cylinder head | Cylinder head bolts | 34 | 25 | M12 Bolts, Step 1 |
|
|
| Cylinder head | Cylinder head bolts | 54 | 40 | M12 Bolts, Step 2 |
|
|
| Cylinder head | Cylinder head cover bolts | 8 | 6 |
|
|
|
| Cylinder head | Coil to Cylinder head cover bolts | 7 | 5 |
|
|
|
| Intake manifold | Intake manifold bolts | 12 | 9 |
|
|
|
| Throttle body | Throttle body bolts | 12 | 9 |
|
|
|
| Engine block | Front insulator through bolt and nut | 95 | 70 |
|
|
|
| Engine block | Front insulator to Support bracket stud nut | 41 | 30 |
|
|
|
| Engine block | Front insulator to Support bracket through bolt and nut | 102 | 75 |
|
|
|
| Engine block | Front insulator to Block bolts | 95 | 70 |
|
|
|
| Engine block | Rear insulator to Bracket through bolt | 68 | 50 |
|
|
|
| Engine block | Rear insulator to Crossmember support bracket nut | 41 | 30 |
|
|
|
| Engine block | Rear insulator to Crossmember nuts | 68 | 50 |
|
|
|
| Engine block | Rear insulator bracket bolts | 68 | 50 |
|
|
|
| Engine block | Rear support bracket to Crossmember flange nuts | 41 | 30 |
|
|
|
| Engine block | Coolant drain plug | 27 | 20 | 3/8 inch x 18 NPT |
|
|
| Engine block | Block pipe plugs | 34 | 25 | 1/4 inch x 18 NPT |
|
|
| Engine block | Oil galley plug | 20 | 15 | 1/4 inch x 18 NPT |
|
|
| Alternator | Generator mounting bolts | 55 | 41 |
|
|
|
| Camshaft | Camshaft sprocket bolt | 122 | 90 |
|
|
|
| Camshaft | Camshaft tensioner plate bolts | 28 | 21 |
|
|
|
| Crankshaft | Main bearing cap bolts | 28 | 21 | Double ended hex M12, Stage 1 |
|
|
| Crankshaft | Main bearing cap cross bolts | 31 | 23 | M8 |
|
|
| Crankshaft | Vibration damper bolt | 176 | 130 |
|
|
|
| Water pump | Water pump to Timing chain case cover bolts | 28 | 21 |
|
|
|
| Radiator | Thermostat housing bolts | 28 | 21 |
|
|
|
| Belt tensioner/Timing chains | Timing chain case cover bolts | 28 | 21 |
|
|
|
| Belt tensioner/Timing chains | Timing chain case cover lifting stud | 55 | 41 |
|
|
|
| Rocker arm | Rocker arm bolts | 22 | 16 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Flywheel to Crankshaft bolts | 75 | 55 |
|
|
|
| Flywheel/Flex plate | Flexplate to Crankshaft bolts | 95 | 70 |
|
|
|
| Transmission fluid pan | Rear insulator to Transmission bolts | 68 | 50 |
|
|
|
| Transmission mount/case | Transmission support bracket bolts | 68 | 50 |
|
|
|
| Transfer | Transfer case to Insulator mounting plate nuts | 204 | 150 |
|
|
|
| Transfer | Rear support plate to Transfer case bolts | 41 | 30 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold to Cylinder head | 25 | 18 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Vauxford - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 0 👎 5
