Jeep Grand Cherokee 3 (2005-2010) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Jeep Grand Cherokee 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Jeep Grand Cherokee 3
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2010
- Generation: 3
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil filter | Cooler return oil filter | 10 | 7 |
|
|
|
| Oil pump | Oil pump bolts | 28 | 21 |
|
|
|
| Oil pump | Oil pump body to Cover bolt | 5 | 4 |
|
|
|
| Oil pump | Plate to Oil pump body screw | 5 | 4 |
|
|
|
| Sensor | Input speed sensor bolt | 12 | 9 |
|
|
|
| Sensor | Output speed sensor bolt | 12 | 9 |
|
|
|
| Sensor | Line pressure sensor bolt | 12 | 9 |
|
|
|
| Valve cover | Valve body to Case bolt | 12 | 9 |
|
|
|
| Valve cover | Valve body to Transfer plate screw | 6 | 4 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Drive plate to Crankshaft bolt | 75 | 55 |
|
|
|
| Transmission fluid pan | Oil pan bolt | 12 | 9 |
|
|
|
| Transmission fluid pan | Transmission collar bolts | 68 | 50 |
|
|
|
| Transmission fluid pan | Transmission cooler line fitting | 18 | 13 |
|
|
|
| Transmission fluid pan | Crossmember bolt and nut | 68 | 50 |
|
|
|
| Transmission fluid pan | Primary fluid filter screw | 5 | 4 |
|
|
|
| Transmission mount/case | Detent spring screw | 5 | 4 |
|
|
|
| Transmission mount/case | Clevis bracket/Rear support bolts | 47 | 35 |
|
|
|
| Torque converter | Torque converter to Driveplate bolt | 31 | 23 |
|
|
|
| Torque converter | Converter housing bolt | 68 | 50 |
|
|
|
| Torque converter | Torque converter housing to Engine upper four bolt | 41 | 30 |
|
|
|
| Torque converter | Torque converter housing to Engine lower four bolt | 54 | 40 |
|
|
|
| Transfer | Transfer case nuts | 35 | 26 |
|
|
|
| Transfer | Manual selector shaft cross bolt | 16 | 12 |
|
|
|
| Transfer | Manual selector retaining screw | 28 | 21 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Vauxford - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 0 👎 5
