Jeep Grand Cherokee 3 (2005-2010) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Jeep Grand Cherokee 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Jeep Grand Cherokee 3
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2010
- Generation: 3
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pump | Oil pump bolts | 20 | 15 |
|
|
|
| Valve cover | Valve body/Housing side cover screws | 4 | 3 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Clutch assembly | B2 Clutch carrier bolt | 16 | 12 |
|
|
|
| Transmission fluid pan | Oil pan bolt | 8 | 6 |
|
|
|
| Transmission fluid pan | Transmission to Engine bolt | 39 | 29 |
|
|
|
| Transmission fluid pan | Crossmember to Frame bolt | 68 | 50 |
|
|
|
| Transmission mount/case | Transmission housing to Converter housing bolts | 20 | 15 |
|
|
|
| Transmission mount/case | Rear support to Transmission bolt | 47 | 35 |
|
|
|
| Transmission mount/case | Clevis bracket to Crossmember bolt | 47 | 35 |
|
|
|
| Transmission mount/case | Clevis bracket to Rear support bolt | 68 | 50 |
|
|
|
| Transmission adapter | Adapter housing bolts | 20 | 15 |
|
|
|
| Torque converter | Torque converter bolt | 42 | 31 |
|
|
|
| Torque converter | B1 carrier to Converter housing bolt | 10 | 7 |
|
|
|
| Transfer | Shift plate bolt | 8 | 6 |
|
|
|
| Transfer | Shifter mechanism to Floor pan nut | 12 | 9 |
|
|
|
| Drive/Axle shaft | Adapter shaft nut | 200 | 148 |
|
|
|
| Drive/Axle shaft | Propeller flange nut | 200 | 148 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Vauxford - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 0 👎 5
