Mitsubishi Galant 9 (2004-2012) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Mitsubishi Galant 9 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Mitsubishi Galant 9
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Wheel nut | 98 | 72 | ±10 Nm |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2004 - 2012
- Generation: 9
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Engine oil pan drain plug | 39 | 29 | ±5 Nm |
|
|
| Oil pan | Engine oil pan bolt | 9 | 7 | ±3 Nm |
|
|
| Oil pan | Engine lower oil pan bolt | 11 | 8 | ±1 Nm |
|
|
| Oil pan | Engine upper oil pan bolt | 9 | 7 | ±3.5 Nm |
|
|
| Oil pan | Engine upper oil pan to Torque converter bolt | 35 | 26 | ±5 Nm |
|
|
| Oil pan | Baffle plate bolt | 9 | 7 | M6, ±2 Nm |
|
|
| Oil pan | Baffle plate bolt | 22 | 16 | M8, ±4 Nm |
|
|
| Oil filter | Engine oil filter | 14 | 10 | MD352627, MD321589, MD356000, ±2 Nm |
|
|
| Oil filter | Engine oil filter | 17 | 13 | MD136466, MD322508, ±3 Nm |
|
|
| Oil filter | Engine oil pan strainer bolt | 19 | 14 | ±3 Nm |
|
|
| Oil pressure switch | Engine oil pressure switch | 19 | 14 | ±3 Nm |
|
|
| Oil pressure switch | Engine oil pressure switch | 10 | 7 | ±2 Nm |
|
|
| Oil dipstick | Engine oil dipstick guide bolt | 13 | 10 | ±1 Nm |
|
|
| Oil dipstick | Engine oil dipstick bolt | 14 | 10 | ±1 Nm |
|
|
| Oil pump | Oil screen bolt | 19 | 14 | ±3 Nm |
|
|
| Vacuum pump | Vacuum pipe bolt | 9 | 7 | ±1 Nm |
|
|
| Cylinder head | Cylinder head bolt | 78 | 58 | Cold engine, Step 1, ±2 Nm |
|
|
| Cylinder head | Cylinder head bolt | 20 | 15 | Cold engine, Step 3, ±2 Nm |
|
|
| Cylinder head | Cylinder head bolt | 108 | 80 | Cold engine, Step 1, ±5 Nm |
|
|
| Cylinder head | Cylinder head bolt | 108 | 80 | Cold engine, Step 3, ±5 Nm |
|
|
| Cylinder head | Cylinder head plug | 47 | 35 | ±7 Nm |
|
|
| Spark plugs | Spark plug | 25 | 18 | ±4 Nm |
|
|
| Spark plugs | Spark plug | 25 | 18 | ±4 Nm |
|
|
| Intake manifold | Intake manifold bolt | 24 | 18 | ±3 Nm |
|
|
| Intake manifold | Intake manifold bolt | 22 | 16 | ±1 Nm |
|
|
| Intake manifold | Intake manifold nut | 20 | 15 | ±2 Nm |
|
|
| Intake manifold | Intake manifold plenum bolt | 18 | 13 | ±2 Nm |
|
|
| Intake manifold | Intake manifold plenum stay bolt | 18 | 13 | M8, ±2 Nm |
|
|
| Intake manifold | Intake manifold plenum stay bolt | 36 | 27 | M10, ±6 Nm |
|
|
| Intake manifold | Intake manifold stay bolt | 31 | 23 | ±3 Nm |
|
|
| Intake manifold | Air intake hose clamp bolt | 4 | 3 | ±0.9 Nm |
|
|
| Throttle body | Throttle body mounting bolt | 28 | 21 | ±4 Nm |
|
|
| Throttle body | Throttle body mounting bolt | 28 | 21 | ±4 Nm |
|
|
| Throttle body | Throttle body stay bolt | 18 | 13 | ±2 Nm |
|
|
| Engine block | Cylinder block heater unit bolt | 3 | 2 | ±0.2 Nm |
|
|
| Engine block | Cylinder block heater unit | 3 | 2 | ±0.2 Nm |
|
|
| Engine block | Cylinder block heater cover bolt | 22 | 16 | M10, ±4 Nm |
|
|
| Engine block | Cylinder block heater cover bolt | 41 | 30 | M12, ±8 Nm |
|
|
| Engine block | Cylinder block plug | 30 | 22 | ±3 Nm |
|
|
| Engine block | Cylinder block drain plug | 44 | 32 | ±5 Nm |
|
|
| Engine block | Cylinder block drain plug | 39 | 29 | ±5 Nm |
|
|
| Engine block | PCV valve | 10 | 7 | ±2 Nm |
|
|
| Engine mounts | Engine front mounting bracket bolt | 58 | 43 | M10, ±7 Nm |
|
|
| Engine mounts | Engine front mounting bracket bolt | 58 | 43 | M10, ±7 Nm |
|
|
| Engine mounts | Engine front mounting bracket bolt and nut | 83 | 61 | M12, ±12 Nm |
|
|
| Engine mounts | Engine front mounting bracket bolt and nut | 83 | 61 | M12, ±12 Nm |
|
|
| Engine mounts | Engine mounting stay bolt | 36 | 27 | ±6 Nm |
|
|
| Engine mounts | Engine support bracket bolt | 45 | 33 | ±5 Nm |
|
|
| Engine mounts | Engine cover bolt | 3 | 2 | ±0.5 Nm |
|
|
| Sensor | Camshaft position sensor bolt | 11 | 8 | ±1 Nm |
|
|
| Sensor | Camshaft position sensor bolt | 11 | 8 | ±1 Nm |
|
|
| Sensor | Crankshaft position sensor bolt | 9 | 7 | ±0.5 Nm |
|
|
| Sensor | Crankshaft position sensor bolt | 9 | 7 | ±1 Nm |
|
|
| Sensor | Knock sensor | 23 | 17 | ±2 Nm |
|
|
| Sensor | Knock sensor | 23 | 17 | ±2 Nm |
|
|
| Sensor | Knock sensor connector bracket bolt | 11 | 8 | ±1 Nm |
|
|
| Sensor | Engine coolant temperature sensor | 30 | 22 | ±9 Nm |
|
|
| Sensor | Mass airflow sensor bolt | 2 | 1 | ±0.6 Nm |
|
|
| Sensor | Heated oxygen sensor | 44 | 32 | ±5 Nm |
|
|
| Sensor | Heated oxygen sensor - left bank | 44 | 32 | ±5 Nm |
|
|
| Sensor | Heated oxygen sensor - right bank | 44 | 32 | ±5 Nm |
|
|
| Sensor | Manifold absolute pressure sensor bolt | 5 | 4 | ±1 Nm |
|
|
| Sensor | Input shaft speed sensor | 11 | 8 | ±1 Nm |
|
|
| Sensor | Output shaft speed sensor | 11 | 8 | ±1 Nm |
|
|
| Alternator | Generator bolt | 49 | 36 | ±9 Nm |
|
|
| Alternator | Generator bolt | 49 | 36 | ±9 Nm |
|
|
| Alternator | Generator nut | 44 | 32 | ±10 Nm |
|
|
| Alternator | Generator mounting bracket bolt | 49 | 36 | ±9 Nm |
|
|
| Alternator | Generator terminal nut | 12 | 9 | ±2 Nm |
|
|
| Alternator | Generator terminal nut | 12 | 9 | ±2 Nm |
|
|
| Starter | Starter bolt | 30 | 22 | ±3 Nm |
|
|
| Starter | Starter bolt | 30 | 22 | ±3 Nm |
|
|
| Starter | Starter cover bolt | 9 | 7 | ±2 Nm |
|
|
| Starter | Starter cover bolt | 5 | 4 | ±1 Nm |
|
|
| Starter | Starter cover bracket bolt | 49 | 36 | ±9 Nm |
|
|
| Starter | Starter terminal nut | 12 | 9 | ±2 Nm |
|
|
| Starter | Starter terminal nut | 12 | 9 | ±2 Nm |
|
|
| Battery | Battery terminal nut | 5 | 4 | ±1 Nm |
|
|
| Battery | Ignition coil bolt | 10 | 7 | ±2 Nm |
|
|
| Battery | Ignition coil bolt | 10 | 7 | ±2 Nm |
|
|
| Camshaft | Camshaft sprocket bolt | 89 | 66 | ±9 Nm |
|
|
| Camshaft | Camshaft sprocket bolt | 88 | 65 | ±10 Nm |
|
|
| Camshaft | Camshaft position sensing cylinder bolt | 22 | 16 | ±4 Nm |
|
|
| Camshaft | Camshaft position sensing cylinder bolt | 22 | 16 | ±4 Nm |
|
|
| Crankshaft | Crankshaft pulley center bolt | 167 | 123 |
|
|
|
| Crankshaft | Crankshaft pulley center bolt | 185 | 136 |
|
|
|
| Crankshaft | Crankshaft damper pulley bolt | 25 | 18 | ±4 Nm |
|
|
| Common rail | Fuel rail bolt | 11 | 8 | ±1 Nm |
|
|
| Common rail | Fuel rail and injector bolt | 12 | 9 | ±1 Nm |
|
|
| Water pump | Water pump bolt | 14 | 10 | ±1 Nm |
|
|
| Water pump | Water pump bolt | 42 | 31 | M8, ±8 Nm |
|
|
| Water pump | Water pump bolt | 24 | 18 | M10, ±3 Nm |
|
|
| Water pump | Water pump bracket bolt | 24 | 18 | ±3 Nm |
|
|
| Water pump | Water pump pulley bolt | 9 | 7 | ±1 Nm |
|
|
| Water pump | Water pump inlet pipe | 11 | 8 | ±1 Nm |
|
|
| Heater core | Liquid pipe mounting nut (heater unit side) | 5 | 4 | ±0.9 Nm |
|
|
| Heater core | Suction pipe mounting nut (heater unit side) | 12 | 9 | ±2 Nm |
|
|
| Radiator | Radiator lower hose clamp bolt | 11 | 8 | ±1 Nm |
|
|
| Radiator | Radiator front end structure bar bolt | 11 | 8 | M8x10, ±2 Nm |
|
|
| Radiator | Radiator front end structure bar bolt | 22 | 16 | M8x20, ±4 Nm |
|
|
| Radiator | Thermostat case bolt | 24 | 18 | ±4 Nm |
|
|
| Radiator | Thermostat housing bolt | 19 | 14 | ±1 Nm |
|
|
| Radiator | Thermostat harness bracket bolt | 11 | 8 | ±1 Nm |
|
|
| Radiator | Thermostat control harness bolt | 5 | 4 | ±1 Nm |
|
|
| Radiator | Water inlet fitting bolt | 13 | 10 | ±2 Nm |
|
|
| Radiator | Water inlet fitting bolt | 19 | 14 | ±1 Nm |
|
|
| Radiator | Water outlet fitting bolt | 13 | 10 | ±2 Nm |
|
|
| Radiator | Water hose clamp bolt | 11 | 8 | ±1 Nm |
|
|
| Air conditioning | Suction flexible hose mounting nut (compressor side) | 25 | 18 | ±4 Nm |
|
|
| Air conditioning | Discharge flexible hose mounting bolt (compressor side) | 25 | 18 | ±4 Nm |
|
|
| Air conditioning | Discharge flexible hose mounting nut (condenser side) | 12 | 9 | ±2 Nm |
|
|
| Air conditioning | Liquid pipe mounting bolt (condenser side) | 5 | 4 | ±0.9 Nm |
|
|
| Belt tensioner/Timing chains | Auto-tensioner bolt | 22 | 16 | M8, ±4 Nm |
|
|
| Belt tensioner/Timing chains | Auto-tensioner bolt | 44 | 32 | M10, ±10 Nm |
|
|
| Belt tensioner/Timing chains | Auto-tensioner bolt | 23 | 17 | ±3 Nm |
|
|
| Belt tensioner/Timing chains | Balancer timing belt tensioner bolt | 19 | 14 | ±3 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt tensioner adjuster bolt | 23 | 17 | ±3 Nm |
|
|
| Belt tensioner/Timing chains | Tensioner bracket bolt | 41 | 30 | ±8 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt tensioner arm bolt | 21 | 15 | ±4 Nm |
|
|
| Belt tensioner/Timing chains | Tensioner arm bolt | 44 | 32 | ±10 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt tensioner pulley bolt | 48 | 35 | ±5 Nm |
|
|
| Belt tensioner/Timing chains | Tensioner pulley bolt | 48 | 35 | ±6 Nm |
|
|
| Belt tensioner/Timing chains | Tensioner pulley nut | 49 | 36 | ±9 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt idler pulley bolt | 35 | 26 | ±6 Nm |
|
|
| Belt tensioner/Timing chains | Idler pulley bolt | 79 | 58 | ±5 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt lower cover bolt (flange) | 11 | 8 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt lower cover bolt (flange) | 11 | 8 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt lower cover bolt (washer assembled) | 9 | 7 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt lower cover bolt (washer assembled) | 14 | 10 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt lower cover nut | 11 | 8 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt lower cover bracket bolt | 9 | 7 | ±0.5 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt upper cover bolt | 11 | 8 | M6, ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt upper cover bolt | 14 | 10 | M8, ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt upper cover flange bolt | 11 | 8 | M6, ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt upper cover flange bolt | 14 | 10 | M8, ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt rear center cover bolt | 14 | 10 | ±1 Nm |
|
|
| Valve cover | Rocker cover assembly bolt | 4 | 3 | ±0.5 Nm |
|
|
| Valve cover | Rocker cover bracket bolt | 11 | 8 | ±1 Nm |
|
|
| Valve cover | Rocker cover bolt | 4 | 3 | ±0.5 Nm |
|
|
| PCM | PCM mounting bolt | 12 | 9 | ±2 Nm |
|
|
| PCM | PCM bracket bolt | 5 | 4 | ±1 Nm |
|
|
| PCM | PCM connector cover bolt | 5 | 4 | ±1 Nm |
|
|
| Rocker arm | Exhaust rocker arm shaft bolt | 13 | 10 | ±1 Nm |
|
|
| Rocker arm | Intake rocker arm shaft bolt | 31 | 23 | ±3 Nm |
|
|
| Rocker arm | Rocker shaft bolt | 31 | 23 | ±3 Nm |
|
|
| Fuel system | Fuel tank band nut | 26 | 19 | ±4 Nm |
|
|
| Fuel system | Fuel high-pressure hose bolt | 5 | 4 | ±1 Nm |
|
|
| Fuel system | Fuel high-pressure hose bolt | 5 | 4 | ±1 Nm |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Differential drive gear | 135 | 100 | ±5 Nm |
|
|
| Wheel hub assembly | Front wheel hub bolt | 90 | 66 | ±10 Nm |
|
|
| Wheel hub assembly | Rear wheel hub assembly mounting bolt | 73 | 54 | ±7 Nm |
|
|
| Flywheel/Flex plate | Drive plate bolt | 132 | 97 | ±5 Nm |
|
|
| Flywheel/Flex plate | Drive plate bolt | 74 | 55 | ±1 Nm |
|
|
| Transmission fluid pan | Transmission fluid drain plug | 32 | 24 | ±2 Nm |
|
|
| Transmission fluid pan | ATF warmer (transmission fluid cooler) attaching bolt | 23 | 17 | ±3 Nm |
|
|
| Transmission fluid pan | ATF warmer (transmission fluid cooler) bracket attaching bolt | 23 | 17 | ±3 Nm |
|
|
| Transmission fluid pan | Oil cooler feed tube | 11 | 8 | ±1 Nm |
|
|
| Transmission mount/case | Transaxle mounting body side bracket flange nut | 83 | 61 | ±12 Nm |
|
|
| Transmission mount/case | Transaxle mounting body side bracket self-locking nut | 58 | 43 | ±7 Nm |
|
|
| Transmission mount/case | Transaxle case rear roll stopper bracket bolt | 90 | 66 | ±10 Nm |
|
|
| Transmission mount/case | Transmission range switch body mounting bolt | 11 | 8 | ±1 Nm |
|
|
| Transmission mount/case | Transaxle control adjusting nut | 12 | 9 | ±2 Nm |
|
|
| Transmission mount/case | Transaxle control cable attaching bolt | 12 | 9 | ±2 Nm |
|
|
| Transmission mount/case | Valve body mounting bolt | 11 | 8 | ±1 Nm |
|
|
| Transmission mount/case | Valve body cover | 11 | 8 | ±1 Nm |
|
|
| Torque converter | Torque converter housing front lower cover bolt | 9 | 7 | M6 |
|
|
| Torque converter | Torque converter housing front lower cover bolt | 26 | 19 | M10 |
|
|
| Torque converter | Torque converter housing | 48 | 35 | ±6 Nm |
|
|
| Transfer | Transfer drive gear | 34 | 25 | ±2 Nm |
|
|
| Transfer | Selector lever assembly attaching bolt | 12 | 9 | ±2 Nm |
|
|
| Transfer | Manual control lever | 23 | 17 | ±3 Nm |
|
|
| Transfer | Manual control shaft detent | 6 | 4 | ±1 Nm |
|
|
| Transfer | Control cable bracket | 23 | 17 | ±3 Nm |
|
|
| Drive/Axle shaft | Drive shaft nut | 226 | 167 | ±29 Nm |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Tie rod end | Tie rod end to Knuckle self-locking nut | 29 | 21 | ±4 Nm |
|
|
| Tie rod end | Tie rod end jam nut | 52 | 38 | ±2 Nm |
|
|
| Tie rod end | Tie rod | 89 | 66 | ±9 Nm |
|
|
| Steering rack | Power steering gear and linkage bolt | 83 | 61 | ±12 Nm |
|
|
| Steering rack | Steering gear and linkage protector bolt | 12 | 9 | ±2 Nm |
|
|
| Steering rack | Front steering gear and joint connecting bolt | 18 | 13 | ±2 Nm |
|
|
| Steering rack | Front steering gear and pressure tube flare nut | 15 | 11 | ±3 Nm |
|
|
| Steering rack | Front steering gear and return tube flare nut | 15 | 11 | ±3 Nm |
|
|
| Steering rack | Power steering gear bracket bolt | 58 | 43 | M10, ±7 Nm |
|
|
| Steering rack | Power steering gear bracket bolt | 83 | 61 | M10, ±7 Nm |
|
|
| Steering rack | Steering gear inner nut (pinion and valve assembly jam nut) | 25 | 18 | ±4 Nm |
|
|
| Steering rack | Steering gear inner nut (rack support cover jam nut) | 59 | 44 | ±10 Nm |
|
|
| Steering rack | Steering gear plug (end plug) | 59 | 44 | ±10 Nm |
|
|
| Steering rack | Steering gear rack support cover | 12 | 9 | ±2 Nm |
|
|
| Pinion | Steering gear inner nut (pinion and valve assembly jam nut) | 25 | 18 | ±4 Nm |
|
|
| Steering column | Steering column assembly and steering gear connecting bolt | 18 | 13 | ±2 Nm |
|
|
| Steering column | Steering column assembly mounting bolt | 12 | 9 | ±2 Nm |
|
|
| Steering wheel | Steering wheel mounting nut | 41 | 30 | ±8 Nm |
|
|
| Steering wheel | Steering wheel dynamic damper | 4 | 3 | ±0.9 Nm |
|
|
| Power steering | Power steering oil pump mounting bolt | 22 | 16 | ±4 Nm |
|
|
| Power steering | Power steering oil pump mounting bolt | 46 | 34 | ±8 Nm |
|
|
| Power steering | Power steering oil pump mounting nut | 42 | 31 | ±7 Nm |
|
|
| Power steering | Power steering oil pump bracket mounting bolt | 24 | 18 | ±4 Nm |
|
|
| Power steering | Power steering oil pump bracket mounting bolt | 41 | 30 | ±8 Nm |
|
|
| Power steering | Power steering oil pump bracket connecting bolt | 41 | 30 | ±8 Nm |
|
|
| Power steering | Power steering pressure hose clamp nut | 12 | 9 | ±2 Nm |
|
|
| Power steering | Power steering pressure hose clamp bracket bolt | 12 | 9 | ±2 Nm |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold nut | 49 | 36 | ±5 Nm |
|
|
| Exhaust manifold | Exhaust manifold nut - left bank | 44 | 32 | ±5 Nm |
|
|
| Exhaust manifold | Exhaust manifold nut - right bank | 44 | 32 | ±5 Nm |
|
|
| Exhaust manifold | Exhaust manifold bracket A bolt | 35 | 26 | ±6 Nm |
|
|
| Exhaust manifold | Exhaust manifold bracket B bolt | 44 | 32 | ±5 Nm |
|
|
| Exhaust manifold | Exhaust manifold stay - left A bolt | 19 | 14 | M8, ±3 Nm |
|
|
| Exhaust manifold | Exhaust manifold stay - left A bolt | 44 | 32 | M10, ±8 Nm |
|
|
| Exhaust manifold | Exhaust manifold stay - right B bolt | 44 | 32 | ±8 Nm |
|
|
| Exhaust manifold | Exhaust manifold cover bolt | 14 | 10 | ±1 Nm |
|
|
| Exhaust manifold | Exhaust manifold heat protector bolt - left bank | 14 | 10 | ±1 Nm |
|
|
| Exhaust manifold | Exhaust manifold heat protector bolt - right bank | 14 | 10 | ±1 Nm |
|
|
| Exhaust manifold | Front no.1 exhaust pipe nut | 35 | 26 | ±4 Nm |
|
|
| Exhaust manifold | Front no.2 exhaust pipe bolt | 49 | 36 | ±4 Nm |
|
|
| Exhaust manifold | Front no.1 exhaust pipe bolt | 35 | 26 | ±4 Nm |
|
|
| Exhaust manifold | Front no.1 exhaust pipe to Front no.2 exhaust pipe bolt | 49 | 36 | ±4 Nm |
|
|
| Exhaust manifold | Front no.1 exhaust pipe to Right bank exhaust manifold nut | 49 | 36 | ±9 Nm |
|
|
| Exhaust manifold | Front no.1 exhaust pipe to Left bank exhaust manifold bolt | 49 | 36 | ±9 Nm |
|
|
| Exhaust manifold | Hanger bolt | 12 | 9 | ±2 Nm |
|
|
| EGR | EGR pipe | 59 | 44 | ±10 Nm |
|
|
| EGR | EGR pipe clamp bolt | 19 | 14 | ±3 Nm |
|
|
| EGR | EGR pipe connection nut | 19 | 14 | ±3 Nm |
|
|
| EGR | Exhaust gas recirculation valve bolt | 24 | 18 | ±3 Nm |
|
|
| Muffler | Main muffler bolt | 49 | 36 | ±4 Nm |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Disc brake | Front brake assembly mounting bolt | 100 | 74 | ±10 Nm |
|
|
| Disc brake | Rear brake assembly mounting bolt | 60 | 44 | ±5 Nm |
|
|
| Disc brake | Front brake bolt (guide pin bolt) | 38 | 28 | ±4 Nm |
|
|
| Disc brake | Rear brake bolt (guide pin bolt) | 44 | 32 | ±5 Nm |
|
|
| Disc brake | Front brake bolt (lock pin bolt) | 38 | 28 | ±4 Nm |
|
|
| Disc brake | Rear brake bolt (lock pin bolt) | 44 | 32 | ±5 Nm |
|
|
| Disc brake | Front caliper bleeder | 8 | 6 | ±1.9 Nm |
|
|
| Disc brake | Rear caliper bleeder | 8 | 6 | ±0.9 Nm |
|
|
| Brake line | Front brake hose connector bolt | 30 | 22 | ±4 Nm |
|
|
| Brake line | Rear brake hose connector bolt | 30 | 22 | ±4 Nm |
|
|
| Brake line | Brake tube flare nut | 15 | 11 | ±2 Nm |
|
|
| Brake booster | Brake booster nut | 14 | 10 | ±2 Nm |
|
|
| Brake pedal | Brake pedal bolt | 13 | 10 | ±2 Nm |
|
|
| Brake pedal | Accelerator pedal assembly nut | 13 | 10 | ±2 Nm |
|
|
| Master cylinder | Brake master cylinder mounting nut | 25 | 18 | ±2 Nm |
|
|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Wheel nut | 98 | 72 | ±10 Nm |
|
|
| Struts | Front strut self-locking nut | 65 | 48 | ±5 Nm |
|
|
| Struts | Front strut assembly to Body connection nut | 48 | 35 | ±7 Nm |
|
|
| Struts | Front strut assembly to Knuckle connection nut | 305 | 225 | ±25 Nm |
|
|
| Shock absorbers/shocks | Rear shock absorber self-locking nut (coil spring nut) | 23 | 17 | ±2 Nm |
|
|
| Shock absorbers/shocks | Rear shock absorber assembly to Body nut | 45 | 33 | ±5 Nm |
|
|
| Shock absorbers/shocks | Rear shock absorber assembly to Knuckle bolt | 100 | 74 | ±10 Nm |
|
|
| Stabilizer bar | Front stabilizer bracket bolt | 58 | 43 | ±7 Nm |
|
|
| Stabilizer bar | Rear stabilizer bracket bolt | 45 | 33 | ±5 Nm |
|
|
| Sway bar links/Stabilizer links | Front stabilizer link nut | 48 | 35 | ±7 Nm |
|
|
| Sway bar links/Stabilizer links | Rear stabilizer bar link assembly nut | 40 | 30 | ±5 Nm |
|
|
| Control arm | Front lower arm to Crossmember connection bolt | 165 | 122 | ±15 Nm |
|
|
| Control arm | Front lower arm to Crossmember connection self-locking nut | 165 | 122 | ±15 Nm |
|
|
| Control arm | Rear lower arm assembly to Crossmember nut | 78 | 58 | ±7 Nm |
|
|
| Control arm | Front lower arm to Knuckle connection self-locking nut | 65 | 48 | ±6 Nm |
|
|
| Control arm | Rear lower arm assembly to Knuckle self-locking nut | 113 | 83 | ±12 Nm |
|
|
| Control arm | Rear upper arm assembly to Crossmember bolt and self-locking nut | 113 | 83 | ±12 Nm |
|
|
| Control arm | Rear upper arm assembly to Knuckle self-locking nut | 113 | 83 | ±12 Nm |
|
|
| Control arm | Rear toe control arm assembly to Crossmember nut | 78 | 58 | ±7 Nm |
|
|
| Control arm | Rear toe control arm assembly to Knuckle self-locking nut | 66 | 49 | ±6 Nm |
|
|
| Trailing arm | Rear trailing arm assembly to Knuckle self-locking nut | 113 | 83 | ±12 Nm |
|
|
| Trailing arm | Rear trailing arm assembly to Trailing arm bracket self-locking nut | 113 | 83 | ±12 Nm |
|
|
| Trailing arm | Rear trailing arm bracket to Body bolt | 100 | 74 | ±10 Nm |
|
|
| Ball joint | Front lower arm ball joint connection self-locking nut | 65 | 48 | ±6 Nm |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Kevauto - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 0 👎 0
