Mitsubishi Galant 9 (2004-2012) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Mitsubishi Galant 9 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Mitsubishi Galant 9
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Wheel nut | 98 | 72 | ±10 Nm |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2004 - 2012
- Generation: 9
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Engine lower oil pan bolt | 11 | 8 | ±1 Nm |
|
|
| Oil pan | Engine upper oil pan bolt | 9 | 7 | ±3.5 Nm |
|
|
| Oil pan | Engine upper oil pan to Torque converter bolt | 35 | 26 | ±5 Nm |
|
|
| Oil pressure switch | Engine oil pressure switch | 10 | 7 | ±2 Nm |
|
|
| Oil dipstick | Engine oil dipstick bolt | 14 | 10 | ±1 Nm |
|
|
| Oil pump | Oil screen bolt | 19 | 14 | ±3 Nm |
|
|
| Cylinder head | Cylinder head bolt | 108 | 80 | Cold engine, Step 1, ±5 Nm |
|
|
| Cylinder head | Cylinder head bolt | 108 | 80 | Cold engine, Step 3, ±5 Nm |
|
|
| Spark plugs | Spark plug | 25 | 18 | ±4 Nm |
|
|
| Intake manifold | Intake manifold bolt | 22 | 16 | ±1 Nm |
|
|
| Throttle body | Throttle body mounting bolt | 28 | 21 | ±4 Nm |
|
|
| Throttle body | Throttle body stay bolt | 18 | 13 | ±2 Nm |
|
|
| Engine block | Cylinder block heater unit | 3 | 2 | ±0.2 Nm |
|
|
| Engine block | Cylinder block heater cover bolt | 22 | 16 | M10, ±4 Nm |
|
|
| Engine block | Cylinder block heater cover bolt | 41 | 30 | M12, ±8 Nm |
|
|
| Engine block | Cylinder block drain plug | 39 | 29 | ±5 Nm |
|
|
| Engine block | PCV valve | 10 | 7 | ±2 Nm |
|
|
| Engine mounts | Engine front mounting bracket bolt | 58 | 43 | M10, ±7 Nm |
|
|
| Engine mounts | Engine front mounting bracket bolt and nut | 83 | 61 | M12, ±12 Nm |
|
|
| Engine mounts | Engine mounting stay bolt | 36 | 27 | ±6 Nm |
|
|
| Engine mounts | Engine support bracket bolt | 45 | 33 | ±5 Nm |
|
|
| Engine mounts | Engine cover bolt | 3 | 2 | ±0.5 Nm |
|
|
| Sensor | Camshaft position sensor bolt | 11 | 8 | ±1 Nm |
|
|
| Sensor | Crankshaft position sensor bolt | 9 | 7 | ±1 Nm |
|
|
| Sensor | Knock sensor | 23 | 17 | ±2 Nm |
|
|
| Sensor | Engine coolant temperature sensor | 30 | 22 | ±9 Nm |
|
|
| Sensor | Heated oxygen sensor - left bank | 44 | 32 | ±5 Nm |
|
|
| Sensor | Heated oxygen sensor - right bank | 44 | 32 | ±5 Nm |
|
|
| Alternator | Generator bolt | 49 | 36 | ±9 Nm |
|
|
| Alternator | Generator terminal nut | 12 | 9 | ±2 Nm |
|
|
| Starter | Starter bolt | 30 | 22 | ±3 Nm |
|
|
| Starter | Starter cover bolt | 5 | 4 | ±1 Nm |
|
|
| Starter | Starter terminal nut | 12 | 9 | ±2 Nm |
|
|
| Battery | Ignition coil bolt | 10 | 7 | ±2 Nm |
|
|
| Camshaft | Camshaft sprocket bolt | 88 | 65 | ±10 Nm |
|
|
| Camshaft | Camshaft position sensing cylinder bolt | 22 | 16 | ±4 Nm |
|
|
| Crankshaft | Crankshaft pulley center bolt | 185 | 136 |
|
|
|
| Common rail | Fuel rail and injector bolt | 12 | 9 | ±1 Nm |
|
|
| Water pump | Water pump bolt | 42 | 31 | M8, ±8 Nm |
|
|
| Water pump | Water pump bolt | 24 | 18 | M10, ±3 Nm |
|
|
| Water pump | Water pump bracket bolt | 24 | 18 | ±3 Nm |
|
|
| Water pump | Water pump inlet pipe | 11 | 8 | ±1 Nm |
|
|
| Radiator | Thermostat housing bolt | 19 | 14 | ±1 Nm |
|
|
| Radiator | Thermostat control harness bolt | 5 | 4 | ±1 Nm |
|
|
| Radiator | Water inlet fitting bolt | 19 | 14 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Auto-tensioner bolt | 23 | 17 | ±3 Nm |
|
|
| Belt tensioner/Timing chains | Tensioner bracket bolt | 41 | 30 | ±8 Nm |
|
|
| Belt tensioner/Timing chains | Tensioner arm bolt | 44 | 32 | ±10 Nm |
|
|
| Belt tensioner/Timing chains | Tensioner pulley bolt | 48 | 35 | ±6 Nm |
|
|
| Belt tensioner/Timing chains | Tensioner pulley nut | 49 | 36 | ±9 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt lower cover bolt (flange) | 11 | 8 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt lower cover bolt (washer assembled) | 14 | 10 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt upper cover flange bolt | 11 | 8 | M6, ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt upper cover flange bolt | 14 | 10 | M8, ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt rear center cover bolt | 14 | 10 | ±1 Nm |
|
|
| Valve cover | Rocker cover bolt | 4 | 3 | ±0.5 Nm |
|
|
| Rocker arm | Rocker shaft bolt | 31 | 23 | ±3 Nm |
|
|
| Fuel system | Fuel high-pressure hose bolt | 5 | 4 | ±1 Nm |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Drive plate bolt | 74 | 55 | ±1 Nm |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Steering rack | Steering gear and linkage protector bolt | 12 | 9 | ±2 Nm |
|
|
| Power steering | Power steering oil pump mounting bolt | 46 | 34 | ±8 Nm |
|
|
| Power steering | Power steering oil pump mounting nut | 42 | 31 | ±7 Nm |
|
|
| Power steering | Power steering oil pump bracket mounting bolt | 41 | 30 | ±8 Nm |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold nut - left bank | 44 | 32 | ±5 Nm |
|
|
| Exhaust manifold | Exhaust manifold nut - right bank | 44 | 32 | ±5 Nm |
|
|
| Exhaust manifold | Exhaust manifold stay - left A bolt | 19 | 14 | M8, ±3 Nm |
|
|
| Exhaust manifold | Exhaust manifold stay - left A bolt | 44 | 32 | M10, ±8 Nm |
|
|
| Exhaust manifold | Exhaust manifold stay - right B bolt | 44 | 32 | ±8 Nm |
|
|
| Exhaust manifold | Exhaust manifold heat protector bolt - left bank | 14 | 10 | ±1 Nm |
|
|
| Exhaust manifold | Exhaust manifold heat protector bolt - right bank | 14 | 10 | ±1 Nm |
|
|
| Exhaust manifold | Front no.1 exhaust pipe bolt | 35 | 26 | ±4 Nm |
|
|
| Exhaust manifold | Front no.1 exhaust pipe to Front no.2 exhaust pipe bolt | 49 | 36 | ±4 Nm |
|
|
| Exhaust manifold | Front no.1 exhaust pipe to Right bank exhaust manifold nut | 49 | 36 | ±9 Nm |
|
|
| Exhaust manifold | Front no.1 exhaust pipe to Left bank exhaust manifold bolt | 49 | 36 | ±9 Nm |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Kevauto - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 0 👎 0
