Torque Settings for Mitsubishi Galant 9 (2004-2012)

Below you'll find the tightening torques for the Mitsubishi Galant 9 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for Mitsubishi Galant 9

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Wheels	Wheel nut	98	72	±10 Nm

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

Are these torque settings right for you?

Production years: 2004 - 2012
Generation: 9
Type of van: car
Model variant: Base
Also known as: Mitsubishi Grunder Mitsubishi 380

All Torque Settings in Tables

engine torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Sensor	Input shaft speed sensor	11	8	±1 Nm	A/T
Sensor	Output shaft speed sensor	11	8	±1 Nm	A/T

drivetrain torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Differential	Differential drive gear	135	100	±5 Nm	A/T
Flywheel/Flex plate	Drive plate bolt	132	97	±5 Nm	2.4L Engine A/T
Flywheel/Flex plate	Drive plate bolt	74	55	±1 Nm	3.8L Engine A/T
Transmission fluid pan	Transmission fluid drain plug	32	24	±2 Nm	A/T
Transmission fluid pan	ATF warmer (transmission fluid cooler) attaching bolt	23	17	±3 Nm	A/T
Transmission fluid pan	ATF warmer (transmission fluid cooler) bracket attaching bolt	23	17	±3 Nm	A/T
Transmission fluid pan	Oil cooler feed tube	11	8	±1 Nm	A/T
Transmission mount/case	Transmission range switch body mounting bolt	11	8	±1 Nm	A/T
Transmission mount/case	Transaxle control adjusting nut	12	9	±2 Nm	A/T
Transmission mount/case	Transaxle control cable attaching bolt	12	9	±2 Nm	A/T
Transmission mount/case	Valve body mounting bolt	11	8	±1 Nm	A/T
Transmission mount/case	Valve body cover	11	8	±1 Nm	A/T
Torque converter	Torque converter housing	48	35	±6 Nm	A/T
Transfer	Transfer drive gear	34	25	±2 Nm	A/T
Transfer	Selector lever assembly attaching bolt	12	9	±2 Nm	A/T
Transfer	Manual control lever	23	17	±3 Nm	A/T
Transfer	Manual control shaft detent	6	4	±1 Nm	A/T
Transfer	Control cable bracket	23	17	±3 Nm	A/T
Drive/Axle shaft	Drive shaft nut	226	167	±29 Nm	A/T