Mitsubishi Outlander 2 (2007-2013) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Mitsubishi Outlander 2 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Mitsubishi Outlander 2
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil filter | Oil filter | 14 | 10 | ±2 Nm, MD360935 |
|
|
| Oil filter | Oil filter | 16 | 12 | ±4 Nm, MD332687 and MD365876 |
|
|
| Spark plugs | Spark plugs | 18 | 13 | ±2 Nm |
|
|
| Differential | Drain plug | 32 | 24 | ±2 Nm |
|
|
| Wheels | Wheel nuts | 98 | 72 | ±10 Nm |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2013
- Generation: 2
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Engine oil pan drain plug | 39 | 29 | ±5 Nm |
|
|
| Oil pan | Oil pan upper bolt | 10 | 7 | ±2.5 Nm |
|
|
| Oil pan | Oil pan lower bolt | 10 | 7 | ±2.5 Nm |
|
|
| Oil pan | Oil pan cover bolt | 10 | 7 | ±2 Nm |
|
|
| Oil filter | Oil filter | 14 | 10 | ±2 Nm, MD360935 |
|
|
| Oil filter | Oil filter | 16 | 12 | ±4 Nm, MD332687 and MD365876 |
|
|
| Oil filter | Oil filter cover bolt | 23 | 17 | ±6 Nm |
|
|
| Oil filter | Oil strainer bolt | 20 | 15 | ±5 Nm |
|
|
| Oil pressure switch | Engine oil pressure switch | 10 | 7 | ±2 Nm |
|
|
| Oil pump | Oil pump case bolt | 23 | 17 | ±6 Nm |
|
|
| Oil pump | Oil pump assembly | 21 | 15 |
|
|
|
| Oil pump | Oil screen bolt | 20 | 15 | ±5 Nm |
|
|
| Piston rods | Connecting rod cap nut | 20 | 15 | ±2 Nm, Step 1 |
|
|
| Cylinder head | Cylinder head bolt | 45 | 33 | ±2 Nm, Step 1 |
|
|
| Spark plugs | Spark plugs | 18 | 13 | ±2 Nm |
|
|
| Intake manifold | Intake manifold nut | 22 | 16 | ±1 Nm |
|
|
| Intake manifold | Intake manifold plenum bolt | 22 | 16 | ±1 Nm |
|
|
| Intake manifold | Intake manifold plenum stay bolt | 20 | 15 | ±5 Nm |
|
|
| Throttle body | Throttle body bolt | 23 | 17 | ±6 Nm |
|
|
| Throttle body | Throttle body stay bolt | 20 | 15 | ±5 Nm |
|
|
| Engine block | Positive crankcase ventilation valve | 3 | 2 | ±0.4 Nm |
|
|
| Engine mounts | Engine mounting bracket nut | 82 | 60 | ±8 Nm |
|
|
| Engine mounts | Engine support bracket bolt | 20 | 15 | ±5 Nm, M8 |
|
|
| Engine mounts | Engine support bracket bolt | 48 | 35 | ±11 Nm, M10 |
|
|
| Engine mounts | Engine cover bracket bolts | 20 | 15 | ±5 Nm |
|
|
| Sensor | Camshaft position sensor bolt | 10 | 7 | ±2.5 Nm |
|
|
| Sensor | Crankshaft position sensor bolt | 10 | 7 | ±2 Nm |
|
|
| Sensor | Engine coolant temperature sensor | 30 | 22 | ±9 Nm |
|
|
| Sensor | Heated oxygen sensor | 44 | 32 | ±5 Nm |
|
|
| Sensor | Knock sensor | 20 | 15 | ±2 Nm |
|
|
| Sensor | Mass airflow sensor bolt | 2 | 1 | ±0.6 Nm |
|
|
| Sensor | Manifold absolute pressure sensor bolt | 5 | 4 | ±1 Nm |
|
|
| Sensor | Front wheel speed sensor bolt | 9 | 7 | ±1.5 Nm |
|
|
| Sensor | Rear wheel speed sensor bolt | 9 | 7 | ±1.5 Nm |
|
|
| Sensor | Rear wheel speed sensor bolt | 9 | 7 | ±1.5 Nm |
|
|
| Sensor | G and yaw rate sensor nut | 5 | 4 | ±1 Nm |
|
|
| Sensor | Fuel lever sensor (sub) nut | 3 | 2 | ±0.4 Nm |
|
|
| Alternator | Generator bolt | 47 | 35 | ±11 Nm |
|
|
| Alternator | Generator bracket bolt | 23 | 17 | ±6 Nm |
|
|
| Starter | Starter assembly bolts | 36 | 27 | ±9 Nm |
|
|
| Starter | Starter connector and terminal nut | 11 | 8 | ±1 Nm |
|
|
| Starter | Starter cover bolt and nut | 5 | 4 | ±1 Nm |
|
|
| Battery | Ignition coil bolt | 10 | 7 | ±2.5 Nm |
|
|
| Camshaft | Camshaft sprockets bolts | 90 | 66 | ±10 Nm |
|
|
| Crankshaft | Crankshaft pulley center bolt | 200 | 148 | Step 1 |
|
|
| Crankshaft | Crankshaft pulley center bolt | 110 | 81 | Step 3 |
|
|
| Crankshaft | Oil seal case bolt | 10 | 7 | ±2 Nm |
|
|
| Crankshaft | Bearing cap bolt | 24 | 18 | ±2 Nm, Step 1 |
|
|
| Common rail | Fuel rail bolts | 11 | 8 | ±1 Nm |
|
|
| Water pump | Water pump bolt | 23 | 17 | ±6 Nm |
|
|
| Heater core | Heater unit assembly mounting bolt | 11 | 8 | ±4 Nm |
|
|
| Heater core | Suction pipe mounting nut (heater unit side) | 5 | 4 | ±0.9 Nm |
|
|
| Radiator | Radiator cap assembly bolt | 12 | 9 | ±2 Nm |
|
|
| Radiator | Radiator lower hose clamp bolt | 12 | 9 | ±2 Nm |
|
|
| Radiator | Radiator hose support bolt | 4 | 3 | ±2 Nm |
|
|
| Radiator | Radiator condenser tank bolt | 12 | 9 | ±2 Nm |
|
|
| Radiator | Radiator condenser tank bracket bolt | 5 | 4 | ±1 Nm |
|
|
| Radiator | Thermostat housing bolt | 23 | 17 | ±6 Nm |
|
|
| Radiator | Water inlet fitting bolt | 23 | 17 | ±6 Nm |
|
|
| Radiator | Water feed tube bolts | 23 | 17 | ±3 Nm |
|
|
| Radiator | Water return tube bolts | 23 | 17 | ±3 Nm |
|
|
| Air conditioning | A/C compressor mounting bolt | 23 | 17 | ±6 Nm |
|
|
| Air conditioning | Liquid pipe mounting bolt (condenser side) | 5 | 4 | ±0.9 Nm |
|
|
| Air conditioning | Flexible suction hose mounting nut (compressor side) | 25 | 18 | ±4 Nm |
|
|
| Air conditioning | Flexible discharge hose mounting bolt (compressor side) | 25 | 18 | ±4 Nm |
|
|
| Air conditioning | Flexible discharge hose mounting nut (condenser side) | 5 | 4 | ±0.9 Nm |
|
|
| Belt tensioner/Timing chains | Drive belt auto-tensioner bolt | 23 | 17 | ±6 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt front upper cover bolts | 7 | 5 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt front lower cover bolt | 7 | 5 | ±1 Nm |
|
|
| Belt tensioner/Timing chains | Timing belt front lower cover bolt | 10 | 7 | ±2 Nm |
|
|
| Belt tensioner/Timing chains | Tensioner pulley assembly | 41 | 30 | ±10 Nm |
|
|
| Belt tensioner/Timing chains | Idler pulley bolt | 41 | 30 | ±10 Nm |
|
|
| Valve cover | Rocker cover bolt | 8 | 6 | ±1 Nm |
|
|
| PCM | ECM bolt | 4 | 3 | ±2 Nm |
|
|
| PCM | ECM break off bolts | 8 | 6 | ±1.5 Nm, Vehicles for Canada |
|
|
| PCM | ECM bracket assembly bolt | 10 | 7 | ±3.5 Nm |
|
|
| PCM | ECM connector cover bolts | 8 | 6 | ±1.5 Nm, Vehicles for Canada |
|
|
| Rocker arm | Rocker arm adjusting nut | 9 | 7 | ±1 Nm |
|
|
| Rocker arm | Rocker arms and shaft bolt exhaust side | 13 | 10 | ±1 Nm |
|
|
| Rocker arm | Rocker arms and shaft bolt intake side | 31 | 23 | ±3 Nm |
|
|
| Fuel system | Injector and fuel rail bolt | 12 | 9 | ±1 Nm |
|
|
| Fuel system | Fuel tank assembly nut | 22 | 16 | ±5 Nm |
|
|
| Fuel system | Fuel tank assembly nut | 22 | 16 | ±5 Nm |
|
|
| Fuel system | Fuel tank band bolts | 41 | 30 | ±10 Nm |
|
|
| Fuel system | Fuel tank band bolts | 41 | 30 | ±10 Nm |
|
|
| Fuel system | Fuel tank lower protector bolt | 5 | 4 | ±1 Nm |
|
|
| Fuel system | Fuel tank lower protector bolt | 5 | 4 | ±1 Nm |
|
|
| Fuel system | Fuel tank filler tube assembly bolts | 20 | 15 | ±5 Nm |
|
|
| Fuel system | Fuel tank filler tube assembly bolts | 20 | 15 | ±5 Nm |
|
|
| Fuel system | Fuel pump module plate nut | 3 | 2 | ±0.4 Nm |
|
|
| Fuel system | Fuel pump module plate nut | 3 | 2 | ±0.4 Nm |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Differential mount bracket bolts | 95 | 70 | ±14 Nm |
|
|
| Differential | Drain plug | 32 | 24 | ±2 Nm |
|
|
| Differential | Filler plug | 32 | 24 | ±2 Nm |
|
|
| Differential | Differential case to Differential carrier | 23 | 17 | ±3 Nm |
|
|
| Differential | Differential case bolt | 41 | 30 | ±5 Nm |
|
|
| Differential | Differential cover assembly bolt | 23 | 17 | ±3 Nm, Bolt 1 |
|
|
| Differential | Differential cover assembly bolt | 48 | 35 | ±6 Nm, Bolt 2 |
|
|
| Differential | Differential nut | 190 | 140 | ±30 Nm |
|
|
| Wheel hub assembly | Rear wheel hub assembly bolt | 95 | 70 | ±14 Nm |
|
|
| Wheel hub assembly | Rear wheel hub assembly bolt | 95 | 70 | ±14 Nm |
|
|
| Flywheel/Flex plate | Drive plate bolt | 76 | 56 | ±4 Nm |
|
|
| Transmission fluid pan | Transmission oil cooler line hose and tube assembly bolt | 24 | 18 | ±4 Nm |
|
|
| Transmission fluid pan | Transmission fluid cooler brackets bolts | 11 | 8 | ±2 Nm |
|
|
| Transmission fluid pan | Transmission fluid filler tube assembly bolt | 11 | 8 | ±1 Nm |
|
|
| Transmission fluid pan | Oil pan cover bolt | 10 | 7 | ±2.5 Nm |
|
|
| Transmission mount/case | Transaxle mounting bracket nut | 47 | 35 | ±7 Nm |
|
|
| Transmission mount/case | Transaxle assembly upper part coupling bolt | 48 | 35 | ±6 Nm |
|
|
| Transmission mount/case | Transaxle assembly lower part coupling bolt | 48 | 35 | ±6 Nm |
|
|
| Transmission mount/case | Transaxle case rear roll stopper bracket bolt | 90 | 66 | ±10 Nm |
|
|
| Transmission mount/case | Transaxle control module (TCM) bolt | 12 | 9 | ±2 Nm |
|
|
| Transmission mount/case | Transaxle control module (TCM) bracket nuts | 12 | 9 | ±2 Nm |
|
|
| Torque converter | Torque converter and drive plate coupling bolt | 49 | 36 | ±3 Nm |
|
|
| Torque converter | Converter housing | 47 | 35 |
|
|
|
| Transfer | Transfer assembly bolts | 69 | 51 | ±9 Nm |
|
|
| Transfer | Transaxle control cable connection (transaxle side) nut | 10 | 7 | ±3.5 Nm |
|
|
| Transfer | Transaxle control cable bolt | 7 | 5 | ±3 Nm |
|
|
| Transfer | Selector lever assembly bolt | 10 | 7 | ±3.5 Nm |
|
|
| Transfer | Manual control lever | 22 | 16 | ±3 Nm |
|
|
| Transfer | Control bracket | 23 | 17 | ±3 Nm |
|
|
| Transfer | Parking pawl | 8 | 6 |
|
|
|
| Drive/Axle shaft | Front driveshaft nut | 144 | 106 | Minimum torque |
|
|
| Drive/Axle shaft | Front driveshaft nut | 176 | 130 | Maximum torque |
|
|
| Drive/Axle shaft | Rear driveshaft nut | 144 | 106 | Minimum torque |
|
|
| Drive/Axle shaft | Rear driveshaft nut | 176 | 130 | Maximum torque |
|
|
| Drive/Axle shaft | Propeller shaft assembly bolt | 40 | 30 | ±5 Nm |
|
|
| Drive/Axle shaft | Propeller shaft assembly nut | 52 | 38 | ±2 Nm |
|
|
| Drive/Axle shaft | Propeller shaft assembly heat protector nuts | 13 | 10 | ±2 Nm |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Tie rod end | Front tie rod end connection self-locking nut | 25 | 18 | ±5 Nm |
|
|
| Tie rod end | Front tie rod jam nut | 52 | 38 | ±2 Nm |
|
|
| Tie rod end | Tie rod | 88 | 65 | ±10 Nm |
|
|
| Steering rack | Steering gear and linkage flanged bolts | 70 | 52 | ±10 Nm |
|
|
| Steering rack | Steering gear and joint connecting bolt | 20 | 15 | ±5 Nm |
|
|
| Steering column | Steering column mounting bolts | 12 | 9 | ±3 Nm |
|
|
| Steering column | Steering column lower cover bolt | 3 | 2 | ±0.5 Nm |
|
|
| Steering shaft | Steering column shaft assembly mounting bolt | 28 | 21 | ±7 Nm, Bolt 1 |
|
|
| Steering shaft | Steering column shaft assembly mounting bolts | 12 | 9 | ±3 Nm, Bolts 2 and 3 |
|
|
| Steering shaft | Steering column shaft assembly mounting bolt | 20 | 15 | ±5 Nm, Bolt 4 |
|
|
| Steering wheel | Steering wheel assembly self-locking nut | 44 | 32 | ±11 Nm |
|
|
| Power steering | Power steering oil pump assembly bolt | 25 | 18 | ±4 Nm |
|
|
| Power steering | Power steering pump bracket bolts | 50 | 37 | ±7 Nm |
|
|
| Power steering | Power steering tensioner pulley bracket bolt | 23 | 17 | ±6 Nm |
|
|
| Power steering | Pump cover bolt | 28 | 21 | ±1 Nm |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold nut | 49 | 36 | ±5 Nm |
|
|
| Exhaust manifold | Exhaust manifold bracket bolt | 41 | 30 | ±10 Nm, Bolt and washer assembly |
|
|
| Exhaust manifold | Exhaust manifold bracket bolt | 47 | 35 | ±11 Nm, Flange bolt |
|
|
| Exhaust manifold | Exhaust manifold cover bolt | 16 | 12 | ±4 Nm |
|
|
| Exhaust manifold | Exhaust manifold heat protector bolt | 16 | 12 | ±4 Nm |
|
|
| Exhaust manifold | Front exhaust pipe bolt | 41 | 30 | ±10 Nm |
|
|
| Exhaust manifold | Front exhaust pipe bolt | 41 | 30 | ±10 Nm |
|
|
| Exhaust manifold | Front exhaust pipe nuts | 50 | 37 | ±10 Nm |
|
|
| Exhaust manifold | Front exhaust pipe nuts | 50 | 37 | ±10 Nm |
|
|
| Exhaust manifold | Center exhaust pipe bolt | 41 | 30 | ±10 Nm |
|
|
| Exhaust manifold | Center exhaust pipe bolt | 41 | 30 | ±10 Nm |
|
|
| EGR | Exhaust gas recirculation pipe bolt | 20 | 15 | ±5 Nm |
|
|
| EGR | Exhaust gas recirculation valve bolt | 23 | 17 | ±6 Nm |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Disc brake | Front brake caliper assembly bolt | 100 | 74 | ±10 Nm |
|
|
| Disc brake | Rear caliper assembly bolt | 55 | 41 | ±5 Nm |
|
|
| Disc brake | Rear caliper assembly bolt | 55 | 41 | ±5 Nm |
|
|
| Disc brake | Front caliper body guide pin | 44 | 32 | ±5 Nm |
|
|
| Disc brake | Rear caliper body guide pin | 44 | 32 | ±5 Nm |
|
|
| Brake line | Front brake hose connection bolt | 30 | 22 | ±4 Nm |
|
|
| Brake line | Brake pipe connections | 16 | 12 | ±3 Nm |
|
|
| Brake booster | Brake booster mounting nut | 14 | 10 | ±3 Nm |
|
|
| Brake pedal | Brake pedal assembly nut | 13 | 10 | ±2 Nm |
|
|
| Brake pedal | Accelerator pedal assembly nut | 13 | 10 | ±2 Nm |
|
|
| Parking brake | Parking brake lever assembly bolts | 20 | 15 | ±5 Nm |
|
|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Wheel nuts | 98 | 72 | ±10 Nm |
|
|
| Struts | Front strut assembly to Knuckle connection nut | 110 | 81 | ±11 Nm |
|
|
| Struts | Front strut assembly self-locking nut | 60 | 44 | ±9 Nm |
|
|
| Struts | Front strut assembly to Body connection nut | 45 | 33 | ±7 Nm |
|
|
| Shock absorbers/shocks | Rear shock absorber assembly to Body nut | 45 | 33 | ±7 Nm |
|
|
| Shock absorbers/shocks | Rear shock absorber assembly to Lower arm nut | 71 | 52 | ±10 Nm |
|
|
| Shock absorbers/shocks | Rear shock absorber assembly self-locking nut | 25 | 18 | ±5 Nm |
|
|
| Stabilizer bar | Front stabilizer fixture bolt | 31 | 23 | ±4 Nm |
|
|
| Stabilizer bar | Rear stabilizer bracket bolt | 31 | 23 | ±4 Nm |
|
|
| Sway bar links/Stabilizer links | Front stabilizer to Stabilizer link connection nut | 39 | 29 | ±6 Nm |
|
|
| Sway bar links/Stabilizer links | Rear stabilizer bar link nut | 39 | 29 | ±6 Nm |
|
|
| Sway bar links/Stabilizer links | Front strut assembly to Stabilizer link connection nut | 39 | 29 | ±6 Nm |
|
|
| Sway bar links/Stabilizer links | Rear lower arm to Stabilizer bar link nut | 39 | 29 | ±6 Nm |
|
|
| Control arm | Lower arm to Crossmember connection bolt (front) | 110 | 81 | ±11 Nm |
|
|
| Control arm | Lower arm to Crossmember connection bolt (rear) | 110 | 81 | ±11 Nm |
|
|
| Control arm | Rear upper arm to Crossmember bolt | 71 | 52 | ±10 Nm |
|
|
| Control arm | Rear lower arm to Crossmember nut | 71 | 52 | ±10 Nm |
|
|
| Control arm | Front lower arm to Knuckle connection nut | 71 | 52 | ±10 Nm |
|
|
| Control arm | Front height sensor to Lower arm connection nut | 10 | 7 | ±2.5 Nm |
|
|
| Control arm | Rear upper arm assembly to Trailing arm | 71 | 52 | ±10 Nm |
|
|
| Control arm | Rear lower arm assembly to Trailing arm nut | 71 | 52 | ±10 Nm |
|
|
| Trailing arm | Rear trailing arm to Rear hub assembly bolt | 95 | 70 | ±14 Nm |
|
|
| Trailing arm | Rear trailing arm to Brake hose bracket bolt | 11 | 8 | ±2 Nm |
|
|
| Trailing arm | Rear trailing arm to Body bolt | 110 | 81 | ±11 Nm |
|
|
| Trailing arm | Rear wheel speed sensor to Trailing arm bolt | 9 | 7 | ±1.5 Nm |
|
|
| Trailing arm | Rear control link to Trailing arm nut | 71 | 52 | ±10 Nm |
|
|
| Ball joint | Front lower arm ball joint connection self-locking nut | 71 | 52 | ±10 Nm |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By OSX - Own work, Public Domain
Did you find the answer to your specific question?
👍 3 👎 2