Mitsubishi Outlander 1 (2003-2006) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Mitsubishi Outlander 1 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Mitsubishi Outlander 1
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Drain plug | 64 | 47 | ±4 Nm |
|
|
| Differential | Drain plug | 186 | 137 | ±29 Nm |
|
|
| Wheels | Wheel nuts | 98 | 72 | ±10 Nm |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2003 - 2006
- Generation: 1
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Engine oil pan drain plug | 39 | 29 | ±5 Nm |
|
|
| Oil pan | Engine oil pan mounting bolts | 9 | 7 | ±3 Nm |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheel hub assembly | Rear hub assembly self-locking nut | 175 | 129 | ±25 Nm |
|
|
| Flywheel/Flex plate | Flywheel housing front lower cover bolt | 9 | 7 | Bolt 1, ±1 Nm |
|
|
| Flywheel/Flex plate | Flywheel housing front lower cover bolts | 26 | 19 | Bolts 2, ±5 Nm |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold bracket bolts | 35 | 26 | ±6 Nm |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Brake line | Brake hose and trailing arm connection | 15 | 11 | ±2 Nm |
|
|
| Parking brake | Rear parking brake assembly bolt | 63 | 46 | ±7 Nm |
|
|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Trailing arm | Rear upper arm and trailing arm connection nut | 120 | 89 | ±10 Nm |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By M 93 - Own work, CC BY-SA 3.0
Did you find the answer to your specific question?
👍 1 👎 0
