Mitsubishi Outlander 1 (2003-2006) Torque Spec Settings

By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Mitsubishi Outlander 1 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Mitsubishi Outlander 1
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Differential | Drain plug | 64 | 47 | ±4 Nm |
|
![]() |
Differential | Drain plug | 186 | 137 | ±29 Nm |
|
![]() |
Wheels | Wheel nuts | 98 | 72 | ±10 Nm |
|
![]() |
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2003 - 2006
- Generation: 1
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Differential | Differential drive gear mounting bolt | 132 | 97 | ±5 Nm |
|
![]() |
Clutch assembly | Clutch release bearing retainer mounting bolt | 10 | 7 | ±0.2 Nm |
|
![]() |
Clutch assembly | Clutch housing to Transaxle case mounting bolt | 44 | 32 | ±5 Nm |
|
![]() |
Transmission mount/case | Transmission assembly upper part coupling bolts | 48 | 35 | ±5 Nm |
|
![]() |
Transmission mount/case | Transmission mount stopper nut | 82 | 60 | ±7 Nm |
|
![]() |
Transmission mount/case | Transmission mount bracket nut | 47 | 35 | ±7 Nm |
|
![]() |
Transfer | Shift cable bracket mounting bolt | 18 | 13 | ±3 Nm |
|
![]() |
Transfer | Select lever mounting bolt | 18 | 13 | ±3 Nm |
|
![]() |
Transfer | Select lever mounting nut | 11 | 8 | ±1 Nm |
|
![]() |
Transfer | Control housing mounting bolt | 18 | 13 | ±3 Nm |
|
![]() |
Drive/Axle shaft | Reverse idler gear shaft mounting bolt | 48 | 35 | ±6 Nm |
|
![]() |
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|

By M 93 - Own work, CC BY-SA 3.0
Did you find the answer to your specific question?
👍 1 👎 0