Mitsubishi Outlander 2 (2007-2013) Torque Spec Settings

Researched by Wan Wei Tay
Updated: December 30, 2023

By IFCAR - Own work, Public Domain

Below you'll find the tightening torques for the Mitsubishi Outlander 2 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for Mitsubishi Outlander 2

Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Differential Drain plug 32 24 ±2 Nm
  • AWD
verified source
Wheels Wheel nuts 98 72 ±10 Nm
verified source

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

Are these torque settings right for you?

  • Production years: 2007 - 2013
  • Generation: 2
  • Type of van: car
  • Model variant: Base
  • Also known as: Peugeot 4007 Citroën C-Crosser

All Torque Settings in Tables

engine torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Sensor Rear wheel speed sensor bolt 9 7 ±1.5 Nm
  • AWD
verified source
Sensor Fuel lever sensor (sub) nut 3 2 ±0.4 Nm
  • AWD
verified source
Fuel system Fuel tank assembly nut 22 16 ±5 Nm
  • AWD
verified source
Fuel system Fuel tank band bolts 41 30 ±10 Nm
  • AWD
verified source
Fuel system Fuel tank lower protector bolt 5 4 ±1 Nm
  • AWD
verified source
Fuel system Fuel tank filler tube assembly bolts 20 15 ±5 Nm
  • AWD
verified source
Fuel system Fuel pump module plate nut 3 2 ±0.4 Nm
  • AWD
verified source

drivetrain torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Differential Differential mount bracket bolts 95 70 ±14 Nm
  • AWD
verified source
Differential Drain plug 32 24 ±2 Nm
  • AWD
verified source
Differential Filler plug 32 24 ±2 Nm
  • AWD
verified source
Differential Differential case to Differential carrier 23 17 ±3 Nm
  • AWD
verified source
Differential Differential case bolt 41 30 ±5 Nm
  • AWD
verified source
Differential Differential cover assembly bolt 23 17 ±3 Nm, Bolt 1
  • AWD
verified source
Differential Differential cover assembly bolt 48 35 ±6 Nm, Bolt 2
  • AWD
verified source
Differential Differential nut 190 140 ±30 Nm
  • AWD
verified source
Wheel hub assembly Rear wheel hub assembly bolt 95 70 ±14 Nm
  • AWD
verified source
Drive/Axle shaft Rear driveshaft nut 144 106 Minimum torque
  • AWD
verified source
Drive/Axle shaft Rear driveshaft nut 176 130 Maximum torque
  • AWD
verified source

steering torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

exhaust torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

brakes torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Disc brake Rear caliper assembly bolt 55 41 ±5 Nm
  • AWD
verified source

suspension torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

general torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Example of a Outlander 2

By OSX - Own work, Public Domain


Did you find the answer to your specific question?
👍 3 👎 2