Mitsubishi Outlander 2 (2007-2013) Torque Spec Settings

By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Mitsubishi Outlander 2 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Mitsubishi Outlander 2
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Differential | Drain plug | 32 | 24 | ±2 Nm |
|
![]() |
Wheels | Wheel nuts | 98 | 72 | ±10 Nm |
|
![]() |
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2013
- Generation: 2
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pump | Oil pump assembly | 21 | 15 |
|
![]() |
|
Radiator | Water feed tube bolts | 23 | 17 | ±3 Nm |
|
![]() |
Radiator | Water return tube bolts | 23 | 17 | ±3 Nm |
|
![]() |
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Transmission fluid cooler brackets bolts | 11 | 8 | ±2 Nm |
|
![]() |
Transmission fluid pan | Transmission fluid filler tube assembly bolt | 11 | 8 | ±1 Nm |
|
![]() |
Transmission fluid pan | Oil pan cover bolt | 10 | 7 | ±2.5 Nm |
|
![]() |
Transmission mount/case | Transaxle mounting bracket nut | 47 | 35 | ±7 Nm |
|
![]() |
Transmission mount/case | Transaxle assembly upper part coupling bolt | 48 | 35 | ±6 Nm |
|
![]() |
Transmission mount/case | Transaxle assembly lower part coupling bolt | 48 | 35 | ±6 Nm |
|
![]() |
Transmission mount/case | Transaxle case rear roll stopper bracket bolt | 90 | 66 | ±10 Nm |
|
![]() |
Transmission mount/case | Transaxle control module (TCM) bolt | 12 | 9 | ±2 Nm |
|
![]() |
Transmission mount/case | Transaxle control module (TCM) bracket nuts | 12 | 9 | ±2 Nm |
|
![]() |
Torque converter | Torque converter and drive plate coupling bolt | 49 | 36 | ±3 Nm |
|
![]() |
Torque converter | Converter housing | 47 | 35 |
|
![]() |
|
Transfer | Transfer assembly bolts | 69 | 51 | ±9 Nm |
|
![]() |
Transfer | Transaxle control cable connection (transaxle side) nut | 10 | 7 | ±3.5 Nm |
|
![]() |
Transfer | Transaxle control cable bolt | 7 | 5 | ±3 Nm |
|
![]() |
Transfer | Selector lever assembly bolt | 10 | 7 | ±3.5 Nm |
|
![]() |
Transfer | Manual control lever | 22 | 16 | ±3 Nm |
|
![]() |
Transfer | Control bracket | 23 | 17 | ±3 Nm |
|
![]() |
Transfer | Parking pawl | 8 | 6 |
|
![]() |
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|

By OSX - Own work, Public Domain
Did you find the answer to your specific question?
👍 3 👎 2