Nissan Z-Series 6 (2008-2021) Torque Spec Settings
Below you'll find the tightening torques for the Nissan Z-Series 6 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Nissan Z-Series 6
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Differential | Drain plug | 35 | 26 |
|
||
Differential | Drain plug | 35 | 26 |
|
||
Transmission fluid pan | Drain plug | 35 | 26 |
|
||
Transmission fluid pan | Drain plug | 34 | 25 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2008 - 2021
- Generation: 6
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Drain plug | 35 | 26 |
|
||
Transmission fluid pan | Filler plug | 35 | 26 |
|
||
Transmission mount/case | Transmission to Engine bolts | 75 | 55 | Bolt length 65mm |
|
|
Transmission mount/case | Engine to Transmission bolts | 47 | 35 | Bolt length 35mm |
|
|
Transmission mount/case | Transmission case nut | 5 | 4 |
|
||
Transmission mount/case | Transmission case bracket bolt | 8 | 6 |
|
||
Transmission mount/case | Transmission case baffle plate bolt | 8 | 6 |
|
||
Transmission mount/case | Transmission case front cover bolts | 18 | 13 |
|
||
Transmission adapter | Rear extension bolt | 28 | 21 | Without S-Mode |
|
|
Transmission adapter | Rear extension bolt | 28 | 21 | With S-Mode |
|
|
Transmission adapter | Rear extension upper cover bolt | 6 | 4 | Without S-Mode |
|
|
Transmission adapter | Rear extension upper cover bolt | 6 | 4 | With S-Mode |
|
|
Transfer | Control lever housing bolts | 20 | 15 |
|
||
Transfer | Control lever guide plate bolt | 10 | 7 |
|
||
Transfer | Control lever hole cover bolt | 6 | 4 |
|
||
Transfer | Control rod bolt | 14 | 10 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 0 👎 0