Torque Settings for Nissan Z-Series 6 (2008-2021)

Below you'll find the tightening torques for the Nissan Z-Series 6 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for Nissan Z-Series 6

Part	Description	Torque (Nm)	Torque (ft/lbs)	Applies to
Differential	Drain plug	35	26	R200 Rear Final Drive
Differential	Drain plug	35	26	R200V Rear Final Drive
Transmission fluid pan	Drain plug	35	26	6MT: FS6R31A
Transmission fluid pan	Drain plug	34	25	7AT: RE7R01A

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

Are these torque settings right for you?

Production years: 2008 - 2021
Generation: 6
Type of van: car
Model variant: Base
Also known as: Nissan Fairlady Z

All Torque Settings in Tables

engine torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

drivetrain torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Transmission fluid pan	Drain plug	34	25		7AT: RE7R01A
Transmission fluid pan	Overflow plug	12	9		7AT: RE7R01A
Transmission fluid pan	Oil pan mounting bolts	8	6		7AT: RE7R01A
Transmission fluid pan	A/T fluid cooler tube to A/T assembly bolts	49	36		7AT: RE7R01A
Transmission fluid pan	A/T fluid cooler tube clip bolts and nut	5	4		7AT: RE7R01A
Transmission mount/case	A/T assembly to Engine bolts	75	55	Bolt length 65mm	7AT: RE7R01A
Transmission mount/case	Engine to A/T assembly bolts	47	35	Bolt length 35mm	7AT: RE7R01A
Transmission mount/case	A/T assembly bolt	51	38		7AT: RE7R01A
Transmission mount/case	A/T assembly bracket bolt	22	16	Bracket 1	7AT: RE7R01A
Transmission mount/case	A/T assembly bracket bolts	7	5	Bracket 2, 3 and 4	7AT: RE7R01A
Transfer	Control rod nut	15	11		7AT: RE7R01A
Transfer	A/T shift selector assembly bolts	6	4		7AT: RE7R01A
Transfer	Manual lever nut	34	25		7AT: RE7R01A