BMW 5 Series 5 (2003-2010) Torque Spec Settings
Below you'll find the tightening torques for the BMW 5 Series 5 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for BMW 5 Series 5
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheels | Wheel bolts | 120 | 89 |
|
||
Wheels | Wheel bolts | 120 | 89 |
|
||
Wheels | Wheel bolts | 120 | 89 |
|
||
Wheels | Wheel bolts | 120 | 89 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2003 - 2010
- Generation: 5
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Drainage plug | 25 | 18 |
|
||
Oil filter | Oil filter housing cover | 25 | 18 |
|
||
Spark plugs | Spark plugs | 24 | 18 |
|
||
Engine block | Gearbox to Engine block fasteners | 72 | 53 |
|
||
Engine block | Gearbox to Engine block lower fasteners | 22 | 16 |
|
||
Engine mounts | Gearbox support to Car body fasteners | 35 | 26 |
|
||
Starter | Engine starter fasteners | 43 | 32 |
|
||
Battery | Ignition coil fasteners | 7 | 5 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheel hub assembly | Front hub | 110 | 81 |
|
||
Wheel hub assembly | Rear hub | 250 | 184 |
|
||
Wheel hub assembly | Rear wheel hub bearing fastener | 30 | 22 |
|
||
Clutch pressure plate | Pressure plate fasteners | 25 | 18 |
|
||
Clutch assembly | Clutch slave cylinder fasteners | 22 | 16 |
|
||
Drive/Axle shaft | Rear drive shaft to Reduction gear bolts | 52 | 38 |
|
||
Drive/Axle shaft | Propeller shaft centre support bearing fasteners | 32 | 24 |
|
||
Drive/Axle shaft | Propshaft coupling fasteners | 100 | 74 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Tie rod end | Tie rod end to Steering knuckle fastening nut | 165 | 122 | Use drive socket #21 |
|
|
Tie rod end | Tie rod end locknut | 51 | 38 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust system fasteners | 22 | 16 |
|
||
Exhaust manifold | Exhaust system bracket to Car body fasteners | 22 | 16 |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Front brake disc fastener | 16 | 12 |
|
||
Disc brake | Rear brake disc fastener | 16 | 12 |
|
||
Disc brake | Front brake caliper | 30 | 22 |
|
||
Disc brake | Front brake caliper bracket | 110 | 81 |
|
||
Disc brake | Rear brake caliper bracket | 110 | 81 |
|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheels | Wheel bolts | 120 | 89 |
|
||
Struts | Front shock strut piston rod nut | 64 | 47 |
|
||
Struts | Rear shock strut piston rod nut | 27 | 20 |
|
||
Struts | Front shock strut to Steering knuckle lower fasteners | 81 | 60 |
|
||
Shock absorbers/shocks | Front shock absorber strut mount upper fastener | 34 | 25 |
|
||
Shock absorbers/shocks | Rear shock absorber strut mount upper fastener | 28 | 21 |
|
||
Shock absorbers/shocks | Rear shock absorber lower fastener | 100 | 74 |
|
||
Stabilizer bar | Rear stabilizer bar to Control arm fastener | 100 | 74 |
|
||
Stabilizer bar | Front stabilizer link to Stabilizer bar fastener | 65 | 48 |
|
||
Stabilizer bar | Rear stabilizer link to Stabilizer bar fastener | 65 | 48 |
|
||
Sway bar links/Stabilizer links | Front stabilizer link to Shock strut fastener | 65 | 48 |
|
||
Sway bar links/Stabilizer links | Front stabilizer link bracket fastener | 65 | 48 |
|
||
Control arm | Control arm to Subframe front fastener | 100 | 74 |
|
||
Control arm | Control arm to Body subframe rear fastener | 100 | 74 |
|
||
Control arm | Control arm rear fastener | 100 | 74 | Use drive socket #18 |
|
|
Control arm | Control arm rear fastener | 175 | 129 | Use drive socket #21 |
|
|
Control arm | Suspension arm to Rear knuckle fastener | 165 | 122 |
|
||
Ball joint | Front ball joint fastener | 165 | 122 |
|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 1 👎 11