BMW 6 Series 2 (2003-2010) Torque Spec Settings

By Vauxford - Own work, CC BY-SA 4.0

Below you'll find the tightening torques for the BMW 6 Series 2 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for BMW 6 Series 2

Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Differential Oil drain plug 65 48 3AZ, with sealing ring
  • E63
  • 4.4L Engine
  • N62 V8
unverified source
Differential Oil drain plug 65 48 3AZ, with sealing ring
  • E64
  • 4.4L Engine
  • N62 V8
unverified source
Differential Oil drain plug 60 44 9AZ, with O-ring
  • E63
  • 4.4L Engine
  • N62 V8
unverified source
Differential Oil drain plug 60 44 9AZ, with O-ring
  • E64
  • 4.4L Engine
  • N62 V8
unverified source
Transmission fluid pan Drain plug 8 6
  • 6HP19 A/T
unverified source
Transmission fluid pan Drain plug 8 6
  • 6HP26 A/T
unverified source
Transmission fluid pan Drain plug 8 6
  • 6HP28 A/T
unverified source
Transmission fluid pan Oil drain plug 25 18
  • E63
  • 4.4L Engine
  • N62 V8
  • 6HP26 A/T
unverified source
Wheels Wheel lug nut 110 81
  • E63
  • 4.4L Engine
unverified source
Wheels Wheel lug nut 130 96
  • E63
  • 4.4L Engine
unverified source

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

Are these torque settings right for you?

  • Production years: 2003 - 2010
  • Generation: 2
  • Type of van: car
  • Model variant: Base

All Torque Settings in Tables

engine torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

drivetrain torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Differential Front axle carrier to engine carrier 100 74 1AZ, M12 10.9 thread
  • E64
unverified source
Differential Rear axle carrier with rubber mounts to Body 165 122 3AZ
  • E64
unverified source
Differential Heat shield to Front axle carrier 8 6 12AZ
  • E64
unverified source
Differential Support on body/rear axle carrier 28 21 3AZ
  • E64
unverified source
Differential Oil drain plug 65 48 3AZ, with sealing ring
  • E64
  • 4.4L Engine
  • N62 V8
unverified source
Differential Oil drain plug 60 44 9AZ, with O-ring
  • E64
  • 4.4L Engine
  • N62 V8
unverified source
Wheel hub assembly Bearing unit on swivel bearing screws 110 81 5AZ
  • E64
unverified source
Drive/Axle shaft Reinforcement plate to Front axle support/engine carrier screws and insertion nuts 56 41 9AZ
  • E64
unverified source

steering torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

exhaust torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

brakes torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to

suspension torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Struts Spring strut support bearing nuts 34 25 1AZ, Flanged hexagon nut
  • E64
unverified source
Struts Spring strut shock absorber to Pivot mount screw and nut 81 60 3AZ
  • E64
unverified source
Struts Compression strut on Body 48 35 17AZ, M10 10.9 thread
  • E64
unverified source
Struts Tension strut to Front axle support screw and nut 100 74 1AZ, M12 10.9 thread, Jointing torque
  • E64
unverified source
Struts Tension strut to Steering knuckle/swivel bearing 165 122 19AZ
  • E64
unverified source
Struts Traction strut to Wheel carrier nut 65 48 4AZ, M12 thread
  • E64
unverified source
Shock absorbers/shocks Shock absorber piston rod on Thrust bearing nut 64 47 2AZ
  • E64
unverified source
Shock absorbers/shocks Shock absorber piston rod on Thrust bearing nut 27 20 2AZ, M12 thread
  • E64
unverified source
Shock absorbers/shocks Shock absorber to trailing arm screw 165 122 1AZ, M14 thread
  • E64
unverified source
Stabilizer bar Stabilizer to Front axle carrier/body retaining bar nuts 31 23 1AZ
  • E64
unverified source
Stabilizer bar Stabilzer bar to Rear axle support retaining bracket 28 21 3AZ, M8 thread
  • E64
unverified source
Sway bar links/Stabilizer links Stabilizer link on Stabilizer/bracket nut 65 48 11AZ
  • E64
unverified source
Sway bar links/Stabilizer links Stabilizer link on Anti-roll bar/swinging arm 65 48 2AZ, M10 thread
  • E64
unverified source
Sway bar links/Stabilizer links Stabilizer link bracket on Swivel bearing 59 44 10AZ
  • E64
unverified source
Control arm Control arm to Front axle support screw and nut 100 74 2AZ, M12 10.9 thread, Jointing torque
  • E64
unverified source
Control arm Control arm to Rear axle support nut 65 48 5AZ
  • E64
unverified source
Control arm Control arm on Steering knuckle/swivel bearing nut 165 122 6AZ
  • E64
unverified source
Control arm Upper control arm to Wheel carrier nut 175 129 8AZ, M14x1.5 thread
  • E64
unverified source
Control arm Upper control arm to Rear axle carrier nut 100 74 14AZ
  • E64
unverified source
Control arm Integral link on Front wheel carrier 100 74 21AZ
  • E64
unverified source
Control arm Swinging arm, integral link and wheel carrier screw connection nut 240 177 22AZ
  • E64
unverified source
Control arm Wishbone to Front axle support bolt 100 74 2AZ, Jointing torque
  • E64
  • 4.4L Engine
unverified source
Control arm Wishbone to Swivel bearing/steering knuckle nut 165 122 6AZ
  • E64
  • 4.4L Engine
unverified source
Trailing arm https://www.zpost.com/forums/attachment.php?attachmentid=403613&d=1278071314 100 74 20AZ
  • E64
unverified source
Trailing arm Rear swinging arm to Rear axle support nut 165 122 20AZ, M14 thread
  • E64
unverified source

general torque settings

Save to email ✉️
Part Description Torque (Nm) Torque (ft/lbs) Remarks Applies to
Example of a 6 Series 2

By Vauxford - Own work, CC BY-SA 4.0


Did you find the answer to your specific question?
👍 0 👎 1