Volkswagen Tiguan I (2009-2016) Torque Spec Settings
By M 93 - Own work, CC BY-SA 3.0 de
Below you'll find the tightening torques for the Volkswagen Tiguan I in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Volkswagen Tiguan I
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil filter | Oil filter | 22 | 16 |
|
|
|
| Oil filter | Oil filter | 22 | 16 |
|
|
|
| Spark plugs | Spark plugs | 25 | 18 |
|
|
|
| Intake manifold | Intake manifold | 20 | 15 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2009 - 2016
- Generation: 1
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil sump | 45 | 33 | At the gearbox |
|
|
| Oil pan | Oil sump | 15 | 11 | On the engine block |
|
|
| Oil pan | Oil sump top part | 15 | 11 |
|
|
|
| Oil pan | Oil sump lower part | 8 | 6 |
|
|
|
| Oil filter | Oil filter | 22 | 16 |
|
|
|
| Oil filter | Oil filter | 22 | 16 |
|
|
|
| Oil pump | Oil pump | 9 | 7 | M6 |
|
|
| Oil pump | Oil pump | 20 | 15 | M8 |
|
|
| Oil pump | Oil pump chain wheel | 20 | 15 | First stage |
|
|
| Vacuum pump | Vacuum pump | 10 | 7 |
|
|
|
| Piston rods | Shock-absorber piston rod | 60 | 44 |
|
|
|
| Cylinder head | Cylinder head screws | 30 | 22 | First stage |
|
|
| Cylinder head | Cylinder head screws | 40 | 30 | Screws 1 - 10 |
|
|
| Cylinder head | Cylinder head screws | 8 | 6 | Screws 11 - 14 |
|
|
| Spark plugs | Spark plugs | 25 | 18 |
|
|
|
| Intake manifold | Intake manifold | 20 | 15 |
|
|
|
| Engine block | Crankcase ventilation | 11 | 8 |
|
|
|
| Engine block | Crankcase ventilation | 11 | 8 |
|
|
|
| Engine mounts | Engine mounting | 40 | 30 | On chasis |
|
|
| Engine mounts | Engine mounting | 60 | 44 | On engine bracket |
|
|
| Engine mounts | Engine mounting | 30 | 22 | Strut |
|
|
| Alternator | Alternator | 23 | 17 | Minimum |
|
|
| Alternator | Alternator | 25 | 18 | Maximum |
|
|
| Alternator | Alternator pulley | 80 | 59 | With freehwheel |
|
|
| Alternator | Alternator pulley | 65 | 48 | Without freewheel |
|
|
| Alternator | Generator bracket | 20 | 15 | First stage |
|
|
| Starter | Starter | 75 | 55 |
|
|
|
| Starter | Starter | 75 | 55 |
|
|
|
| Starter | Starter | 75 | 55 |
|
|
|
| Camshaft | Camshaft adjuster | 9 | 7 | Bearing casing |
|
|
| Camshaft | Camshaft adjuster | 9 | 7 | Cap |
|
|
| Camshaft | Camshaft adjuster | 35 | 26 | Central screws |
|
|
| Crankshaft | Balance shaft gear wheel | 20 | 15 | First stage |
|
|
| Crankshaft | Connecting rod bearing | 20 | 15 | M7 |
|
|
| Crankshaft | Connecting rod bearing | 30 | 22 | M8 |
|
|
| Crankshaft | Connecting rod bearing | 30 | 22 | M8 |
|
|
| Crankshaft | Connecting rod bearing | 45 | 33 | M9 |
|
|
| Crankshaft | Crankshaft pulley | 10 | 7 | First stage |
|
|
| Crankshaft | Balance shaft timing chain guide rail | 20 | 15 |
|
|
|
| Crankshaft | Balance shaft timing chain tension rail | 20 | 15 |
|
|
|
| Water pump | Coolant pump | 8 | 6 |
|
|
|
| Water pump | Coolant pump | 9 | 7 |
|
|
|
| Water pump | Coolant pump | 9 | 7 |
|
|
|
| Water pump | Coolant pump pulley | 24 | 18 |
|
|
|
| Fuel/Oil cooler | Oil cooler | 15 | 11 |
|
|
|
| Air conditioning | Air-conditioning compressor | 25 | 18 |
|
|
|
| Air conditioning | Air-conditioning compressor | 20 | 15 | First stage |
|
|
| Belt tensioner | Auxiliary drive belt tensioner | 20 | 15 | First stage |
|
|
| Belt tensioner | Auxiliary drive belt tensioner | 20 | 15 | First stage |
|
|
| Belt tensioner | Auxiliary drive belt tensioner | 20 | 15 | First stage |
|
|
| Belt tensioner | Auxiliary drive belt tensioner | 10 | 7 |
|
|
|
| Belt tensioner | Auxiliary drive belt tensioner | 10 | 7 |
|
|
|
| Belt tensioner | Chain tensioner | 9 | 7 |
|
|
|
| Valve cover | Valve cover | 10 | 7 | First stage |
|
|
| Valve cover | Valve cover | 8 | 6 | First stage |
|
|
| Fuel system | Injection nozzle | 8 | 6 | First stage |
|
|
| Fuel system | Injection nozzle | 10 | 7 | Nuts |
|
|
| Fuel system | Injection nozzle | 5 | 4 | Screws |
|
|
| Fuel system | Injection pump | 10 | 7 | M6 |
|
|
| Fuel system | Injection pump | 20 | 15 | M8 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheel hub assembly | Wheel hub wheel bearing | 70 | 52 | On stub axle |
|
|
| Wheel hub assembly | Wheel hub wheel bearing | 200 | 148 | With front wheel drive |
|
|
| Wheel hub assembly | Wheel hub wheel bearing | 70 | 52 | With all wheel drive |
|
|
| Wheel hub assembly | Wheel hub wheel bearing | 200 | 148 | Without ribbing |
|
|
| Flywheel/Flex plate | Flywheel | 60 | 44 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Tie rod end | Track rod end | 50 | 37 | On stub axle |
|
|
| Tie rod end | Track rod end | 50 | 37 | On stub axle |
|
|
| Tie rod end | Track rod end | 70 | 52 | On track rod |
|
|
| Tie rod end | Track rod end | 100 | 74 | On steering gear |
|
|
| Tie rod end | Track rod end | 90 | 66 | At axle support |
|
|
| Tie rod end | Track rod end | 130 | 96 | On stub axle with front wheel drive |
|
|
| Tie rod end | Track rod end | 150 | 111 | On stub axle with all-wheel drive |
|
|
| Steering rack | Steering gear at the subframe | 50 | 37 |
|
|
|
| Steering column | Lower steering column joint | 30 | 22 |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold | 20 | 15 |
|
|
|
| Exhaust manifold | Exhaust manifold | 20 | 15 |
|
|
|
| Exhaust manifold | Exhaust manifold | 20 | 15 |
|
|
|
| Exhaust manifold | Exhaust manifold | 20 | 15 |
|
|
|
| Exhaust manifold | Exhaust manifold heat shields | 20 | 15 |
|
|
|
| Exhaust manifold | Exhaust manifold heat shields | 20 | 15 |
|
|
|
| Exhaust manifold | Exhaust manifold heat shields | 24 | 18 |
|
|
|
| Exhaust manifold | Exhaust manifold heat shields | 24 | 18 |
|
|
|
| Turbo | Turbo charger | 25 | 18 | At the cylinder head |
|
|
| Turbo | Turbo charger | 8 | 6 | Coolant feed line |
|
|
| Turbo | Turbo charger | 8 | 6 | Coolant return line |
|
|
| Turbo | Turbocharger oil feed line | 10 | 7 | Support screws |
|
|
| Turbo | Turbocharger oil feed line | 22 | 16 | Union nuts |
|
|
| Turbo | Turbocharger oil feed line | 22 | 16 | Union nuts at turbocharger |
|
|
| Turbo | Turbocharger oil feed line | 30 | 22 | Banjo bolts on the engine block |
|
|
| Turbo | Turbocharger oil feed line | 10 | 7 | Support screws |
|
|
| Turbo | Turbocharger oil feed line | 22 | 16 | Union nuts |
|
|
| Turbo | Turbocharger oil feed line | 22 | 16 | At the turbocharger |
|
|
| Turbo | Turbocharger oil feed line | 30 | 22 | Banjo bolts on the engine block |
|
|
| EGR | Exhaust recirculation pipe | 20 | 15 |
|
|
|
| EGR | Exhaust recirculation pipe | 24 | 18 | Nuts |
|
|
| EGR | Exhaust recirculation pipe | 9 | 7 | Screws |
|
|
| EGR | Exhaust recirculation pipe | 20 | 15 |
|
|
|
| EGR | Exhaust recirculation pipe | 24 | 18 | Maximum |
|
|
| EGR | Exhaust recirculation pipe | 9 | 7 | Minimum |
|
|
| EGR | Fuel-distributing pipe | 22 | 16 |
|
|
|
| EGR | Fuel-distributing pipe | 22 | 16 |
|
|
|
| EGR | Fuel-distributing pipe | 22 | 16 |
|
|
|
| Catalytic converter | Catalytic converter | 7 | 5 |
|
|
|
| Catalytic converter | Catalytic converter | 40 | 30 |
|
|
|
| Catalytic converter | Catalytic converter | 40 | 30 |
|
|
|
| Catalytic converter | Catalytic converter bracket | 25 | 18 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Disc brake | Brake hose at brake calliper | 35 | 26 |
|
|
|
| Disc brake | Brake caliper | 30 | 22 |
|
|
|
| Disc brake | Brake caliper | 35 | 26 |
|
|
|
| Disc brake | Brake caliper mounting support | 90 | 66 |
|
|
|
| Disc brake | Brake caliper mounting support | 90 | 66 |
|
|
|
| Disc brake | Brake disc | 4 | 3 |
|
|
|
| Disc brake | Brake disc | 4 | 3 |
|
|
|
| Brake line | Brake line | 14 | 10 |
|
|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Struts | Suspension strut | 15 | 11 | On chassis |
|
|
| Struts | Suspension strut | 70 | 52 | On stub axle |
|
|
| Shock absorbers/shocks | shock absorber | 50 | 37 | On chasis |
|
|
| Shock absorbers/shocks | shock absorber | 180 | 133 | On stub axle |
|
|
| Radius arm | Torque arm | 100 | 74 | At the subframe |
|
|
| Radius arm | Torque arm | 40 | 30 | At the gearbox |
|
|
| Control arm | Support joint at the transverse control arm | 60 | 44 | Aluminium axle strut |
|
|
| Control arm | Support joint at the transverse control arm | 100 | 74 | Steel plate axle strut |
|
|
| Control arm | Lower transverse control arm | 70 | 52 | At the subframe |
|
|
| Control arm | Lower transverse control arm | 50 | 37 | At the pedestal |
|
|
| Control arm | Lower transverse control arm | 70 | 52 | On chassis |
|
|
| Control arm | Track control arm | 95 | 70 | At the axle suport |
|
|
| Control arm | Track control arm | 90 | 66 | On stub axle |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
Did you find the answer to your specific question?
👍 0 👎 5