Volkswagen Tiguan I (2009-2016) Torque Spec Settings
By M 93 - Own work, CC BY-SA 3.0 de
Below you'll find the tightening torques for the Volkswagen Tiguan I in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Volkswagen Tiguan I
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil filter | Oil filter | 22 | 16 |
|
|
|
| Oil filter | Oil filter | 22 | 16 |
|
|
|
| Intake manifold | Intake manifold | 20 | 15 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2009 - 2016
- Generation: 1
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil sump | 45 | 33 | At the gearbox |
|
|
| Oil pan | Oil sump | 15 | 11 | On the engine block |
|
|
| Oil pan | Oil sump top part | 15 | 11 |
|
|
|
| Oil pan | Oil sump lower part | 8 | 6 |
|
|
|
| Oil filter | Oil filter | 22 | 16 |
|
|
|
| Oil filter | Oil filter | 22 | 16 |
|
|
|
| Oil pump | Oil pump | 9 | 7 | M6 |
|
|
| Oil pump | Oil pump | 20 | 15 | M8 |
|
|
| Cylinder head | Cylinder head screws | 30 | 22 | First stage |
|
|
| Cylinder head | Cylinder head screws | 40 | 30 | Screws 1 - 10 |
|
|
| Cylinder head | Cylinder head screws | 8 | 6 | Screws 11 - 14 |
|
|
| Intake manifold | Intake manifold | 20 | 15 |
|
|
|
| Engine block | Crankcase ventilation | 11 | 8 |
|
|
|
| Engine block | Crankcase ventilation | 11 | 8 |
|
|
|
| Alternator | Generator bracket | 20 | 15 | First stage |
|
|
| Starter | Starter | 75 | 55 |
|
|
|
| Starter | Starter | 75 | 55 |
|
|
|
| Starter | Starter | 75 | 55 |
|
|
|
| Crankshaft | Connecting rod bearing | 20 | 15 | M7 |
|
|
| Crankshaft | Connecting rod bearing | 30 | 22 | M8 |
|
|
| Crankshaft | Connecting rod bearing | 30 | 22 | M8 |
|
|
| Crankshaft | Connecting rod bearing | 45 | 33 | M9 |
|
|
| Water pump | Coolant pump | 8 | 6 |
|
|
|
| Water pump | Coolant pump | 9 | 7 |
|
|
|
| Water pump | Coolant pump | 9 | 7 |
|
|
|
| Fuel/Oil cooler | Oil cooler | 15 | 11 |
|
|
|
| Air conditioning | Air-conditioning compressor | 25 | 18 |
|
|
|
| Air conditioning | Air-conditioning compressor | 20 | 15 | First stage |
|
|
| Belt tensioner | Auxiliary drive belt tensioner | 10 | 7 |
|
|
|
| Belt tensioner | Auxiliary drive belt tensioner | 10 | 7 |
|
|
|
| Valve cover | Valve cover | 10 | 7 | First stage |
|
|
| Valve cover | Valve cover | 8 | 6 | First stage |
|
|
| Fuel system | Injection pump | 10 | 7 | M6 |
|
|
| Fuel system | Injection pump | 20 | 15 | M8 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Catalytic converter | Catalytic converter | 40 | 30 |
|
|
|
| Catalytic converter | Catalytic converter | 40 | 30 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
Did you find the answer to your specific question?
👍 0 👎 1
