BMW 3 Series 3 (1992-1999) Torque Spec Settings
By Vauxford - Own work, CC BY-SA 4.0
Below you'll find the tightening torques for the BMW 3 Series 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for BMW 3 Series 3
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1992 - 1999
- Generation: 3
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil filter | Oil filter housing | 25 | 18 |
|
|
|
| Piston rods | Connecting rod bearing | 5 | 4 | First stage |
|
|
| Piston rods | Connecting rod bearing | 20 | 15 | Second stage |
|
|
| Cylinder head | Cylinder head screws | 40 | 30 | Aluminium engine block, First stage |
|
|
| Cylinder head | Cylinder head screws | 30 | 22 | Grey cast-iron engine block, First stage |
|
|
| Cylinder head | Cylinder head screws | 40 | 30 | Aluminium engine block, First stage |
|
|
| Cylinder head | Cylinder head screws | 30 | 22 | Grey cast-iron engine block, First stage |
|
|
| Cylinder head | Cylinder head screws | 40 | 30 | Aluminium engine block, First stage |
|
|
| Cylinder head | Cylinder head screws | 30 | 22 | Grey cast-iron engine block, First stage |
|
|
| Sensor | Knock sensor | 20 | 15 |
|
|
|
| Camshaft | Camshaft timing gear | 5 | 4 | First stage |
|
|
| Camshaft | Camshaft timing gear | 20 | 15 | Second stage |
|
|
| Crankshaft | Crankshaft central bolts | 410 | 302 |
|
|
|
| Belt tensioner/Timing chains | Chain tensioner | 70 | 52 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Flywheel screws | 105 | 77 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold nuts | 20 | 15 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Jeremy from Sydney, Australia - BMW E36 318is, CC BY 2.0
Did you find the answer to your specific question?
👍 0 👎 1
