Ford Falcon 7 (2008-2016) Torque Spec Settings
![](https://tighttorque.com/media/pages/cars/ford/falcon-7/a0e13f2763-1712222935/1280px-2009-2010-ford-fg-g6-limited-edition-sedan-01-1400x-q80.jpg)
OSX, Public domain, via Wikimedia Commons
Below you'll find the tightening torques for the Ford Falcon 7 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Ford Falcon 7
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Differential | Drain plug | 27 | 20 |
|
![]() |
|
Differential | Drain plug | 30 | 22 |
|
![]() |
|
Transmission fluid pan | Drain plug | 27 | 20 |
|
![]() |
|
Wheels | Wheel nuts | 135 | 100 |
|
![]() |
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2008 - 2016
- Generation: 7
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Flywheel/Flex plate | Lower flywheel cover | 15 | 11 |
|
![]() |
|
Flywheel/Flex plate | Flex plate to Torque converter | 60 | 44 |
|
![]() |
|
Transmission fluid pan | Oil level plug | 35 | 26 |
|
![]() |
|
Transmission fluid pan | Oil pan to Transmission | 12 | 9 |
|
![]() |
|
Transmission fluid pan | Cooler tube retaining to Transmission | 25 | 18 |
|
![]() |
|
Transmission adapter | Rear mount adaptor bracket to Transmission | 50 | 37 |
|
![]() |
|
Transmission adapter | Rear transmission mount to Adaptor bracket | 25 | 18 |
|
![]() |
|
Transfer | Selector shaft/shift lever | 14 | 10 |
|
![]() |
|
Transfer | Shifter cable abutment bracket | 25 | 18 |
|
![]() |
|
Drive/Axle shaft | Driveshaft coupling to Output flange | 120 | 89 |
|
![]() |
|
Drive/Axle shaft | Driveshaft coupling to Driveshaft | 75 | 55 |
|
![]() |
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
![Example of a Falcon 7 Example of a Falcon 7](https://tighttorque.com/media/pages/cars/ford/falcon-7/35a24de393-1712222935/1280px-2008_ford_falcon_-fg-_g6e_sedan_-2015-12-07-_02.jpg)
OSX, Public domain, via Wikimedia Commons
Did you find the answer to your specific question?
👍 1 👎 5