Ford Falcon 7 (2008-2016) Torque Spec Settings
OSX, Public domain, via Wikimedia Commons
Below you'll find the tightening torques for the Ford Falcon 7 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Ford Falcon 7
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Drain plug | 27 | 20 |
|
|
|
| Differential | Drain plug | 30 | 22 |
|
|
|
| Transmission fluid pan | Drain plug | 27 | 20 |
|
|
|
| Wheels | Wheel nuts | 135 | 100 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2008 - 2016
- Generation: 7
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Clutch assembly | Clutch housing to Engine bolts (upper) | 60 | 44 |
|
|
|
| Clutch assembly | Clutch housing to Engine bolts (lower) | 40 | 30 |
|
|
|
| Clutch assembly | Clutch housing to Engine bolts | 50 | 37 |
|
|
|
| Clutch assembly | Clutch housing to Front adaptor bolts | 35 | 26 |
|
|
|
| Clutch assembly | CSC mounting bolts | 12 | 9 |
|
|
|
| Transmission fluid pan | Drain plug | 27 | 20 |
|
|
|
| Transmission fluid pan | Fill plug | 27 | 20 |
|
|
|
| Transmission mount/case | Upper bellhousing to Engine | 60 | 44 |
|
|
|
| Transmission mount/case | Upper bellhousing to Engine | 60 | 44 |
|
|
|
| Transmission mount/case | Lower bellhousing to Engine | 40 | 30 |
|
|
|
| Transmission mount/case | Transmission main case to Front adapter housing bolts | 47 | 35 |
|
|
|
| Transmission mount/case | Extension housing to Main case bolts | 49 | 36 |
|
|
|
| Transfer | Shift lever guide bolts | 31 | 23 |
|
|
|
| Transfer | Shift detent | 27 | 20 |
|
|
|
| Transfer | Shift detent cover (top cover) bolts | 15 | 11 |
|
|
|
| Transfer | Gearshift boot lower to Floor nuts | 10 | 7 |
|
|
|
| Transfer | Lower gearshift lever nut | 35 | 26 |
|
|
|
| Transfer | Upper gearshift lever nut and bolt | 35 | 26 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
OSX, Public domain, via Wikimedia Commons
Did you find the answer to your specific question?
👍 1 👎 5
_G6E_sedan_(2015-12-07)_02.jpg){kind=link}