Honda Accord 6 (1992-2002) Torque Spec Settings
![](https://tighttorque.com/media/pages/cars/honda/accord-6/ef2f138eec-1712222940/honda-accord-6th-generation-1400x-q80.jpg)
By TTTNIS - Own work, Public Domain
Below you'll find the tightening torques for the Honda Accord 6 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Honda Accord 6
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil filter | Oil filter | 22 | 16 |
|
![]() |
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1992 - 2002
- Generation: 6
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Drain bolt | 44 | 32 |
|
![]() |
|
Oil pan | Baffle plate bolts | 12 | 9 | Bolts 6x1.0mm |
|
![]() |
Oil filter | Oil filter | 22 | 16 |
|
![]() |
|
Oil dipstick | Dipstick tube bolt | 12 | 9 | Bolt 6x1.0mm |
|
![]() |
Oil pump | Oil pump housing bolt | 12 | 9 | Bolt 6x1.0mm |
|
![]() |
Oil pump | Oil pump cover bolt | 7 | 5 | Bolt 6x1.0mm |
|
![]() |
Oil pump | Oil pump relief valve sealing bolt | 39 | 29 |
|
![]() |
|
Oil pump | Oil screen bolts | 12 | 9 | Bolts 6x1.0mm |
|
![]() |
Piston rods | Rod caps bolts | 20 | 15 |
|
![]() |
|
Cylinder head | Cylinder head cover bolts | 10 | 7 |
|
![]() |
|
Spark plugs | Distributor mounting bolts | 22 | 16 |
|
![]() |
|
Spark plugs | Distributor mounting bolts | 22 | 16 |
|
![]() |
|
Spark plugs | Distributor mounting bolts | 22 | 16 |
|
![]() |
|
Intake manifold | Intake manifold bolts and nuts | 22 | 16 | Bolts and nuts 8x1.25mm |
|
![]() |
Intake manifold | Intake manifold bracket bolts | 22 | 16 | Bolts 8x1.25mm |
|
![]() |
Throttle body | Throttle body mounting bolts and nuts | 22 | 16 |
|
![]() |
|
Engine block | Cylinder block drain bolt | 83 | 61 |
|
![]() |
|
Engine block | Cylinder block right side cover bolt | 12 | 9 | Bolt 6x1.0mm |
|
![]() |
Engine mounts | Engine rear mount mounting bolt | 64 | 47 | Bolt 12x1.25mm |
|
![]() |
Engine mounts | Engine rear mount mounting nut | 54 | 40 | Nut 12x1.25mm |
|
![]() |
Engine mounts | Engine rear stiffener bolt and nut | 38 | 28 | Bolt and nut 10x1.25mm |
|
![]() |
Engine mounts | Engine rear stiffener bolt and nut | 38 | 28 | Bolt and nut 10x1.25mm, Except 01-02 models |
|
![]() |
Engine mounts | Engine upper bracket bolt | 12 | 9 | Bolt 6x1.0mm |
|
![]() |
Engine mounts | Engine upper bracket nut | 22 | 16 | Nut 8x1.25mm |
|
![]() |
Engine mounts | Engine upper bracket bolts and nuts | 54 | 40 | Bolts and nuts 12x1.25mm |
|
![]() |
Engine mounts | Engine front mount bracket mounting bolts | 38 | 28 | Bolts 10x1.25mm |
|
![]() |
Engine mounts | Engine front mount bracket mounting bolt | 64 | 47 | Bolt 10x1.25mm |
|
![]() |
Engine mounts | Engine rear mount bracket bolts | 54 | 40 | Bolts 12x1.25mm |
|
![]() |
Engine mounts | Engine rear mount bracket bolts | 54 | 40 | Bolts 12x1.25mm, For model year 98-00 |
|
![]() |
Engine mounts | Engine rear mount bracket bolts | 44 | 32 | Bolts 10x1.25mm, For model year 01-02 |
|
![]() |
Engine mounts | Engine rear mount bracket bolts | 54 | 40 | Bolts 12x1.25mm, For model year 01-02 |
|
![]() |
Sensor | CKP/TDC sensor bolts | 12 | 9 | Bolts 6x1.0mm |
|
![]() |
Sensor | Intake Air Temperature (IAT) sensor | 18 | 13 |
|
![]() |
|
Sensor | Primary Heated Oxygen Sensor (HO2S) | 44 | 32 |
|
![]() |
|
Sensor | Secondary Heated Oxygen Sensor (HO2S) | 44 | 32 |
|
![]() |
|
Sensor | MAP sensor | 2 | 1 |
|
![]() |
|
Sensor | Front wheel sensor bracket nut | 9 | 7 |
|
![]() |
|
Sensor | Rear wheel sensor mounting bolt | 9 | 7 | For vehicles with ABS |
|
![]() |
Alternator | Alternator lower bolt | 45 | 33 |
|
![]() |
|
Alternator | Alternator bracket bolts | 22 | 16 |
|
![]() |
|
Alternator | Alternator mounting bolt | 44 | 32 | Bolt 10x1.25mm |
|
![]() |
Alternator | Alternator locknut | 22 | 16 | Nut 8x1.25mm |
|
![]() |
Alternator | Alternator pulley locknut | 111 | 82 |
|
![]() |
|
Alternator | Alternator to BLK wire nut | 8 | 6 |
|
![]() |
|
Starter | Starter top mounting bolt | 45 | 33 |
|
![]() |
|
Starter | Starter lower mounting bolt | 64 | 47 |
|
![]() |
|
Starter | Starter cable terminal nut | 9 | 7 | Nut 8x1.25mm |
|
![]() |
Starter | Starter solenoid nuts | 9 | 7 |
|
![]() |
|
Battery | Ground cable bolt | 12 | 9 | Bolt 6x1.0mm |
|
![]() |
Camshaft | Camshaft holders to Cylinder head bolts | 12 | 9 | Bolts 6mm |
|
![]() |
Camshaft | Camshaft holders to Cylinder head bolts | 22 | 16 | Bolts 8mm |
|
![]() |
Camshaft | Camshaft pulley retaining bolt | 59 | 44 | Bolt 10x1.25mm |
|
![]() |
Crankshaft | Crankshaft pulley bolt | 245 | 181 |
|
![]() |
|
Crankshaft | Main bearing caps bolts | 29 | 21 | Stage 1, Bolts 11mm |
|
![]() |
Crankshaft | Main bearing caps bolts | 78 | 58 | Final stage, Bolts 11mm |
|
![]() |
Crankshaft | Main bearing caps bolts | 12 | 9 | Bolts 6mm |
|
![]() |
Crankshaft | Balancer shaft retainer bolt | 20 | 15 | Bolt 6mm |
|
![]() |
Common rail | Fuel rail retainer nuts | 12 | 9 |
|
![]() |
|
Water pump | Water pump bolts | 12 | 9 | Bolts 6x1.0mm |
|
![]() |
Radiator | Radiator upper bracket and cushion bolts | 10 | 7 | Bolts 6x1.0mm |
|
![]() |
Radiator | Radiator fan nut | 5 | 4 |
|
![]() |
|
Radiator | Radiator fan shroud bolt | 7 | 5 | Bolt 6x1.0mm |
|
![]() |
Radiator | Thermostat cover bolts | 12 | 9 | Bolts 6x1.0mm |
|
![]() |
Air conditioning | A/C compressor bolts | 22 | 16 | Bolts 8x1.25mm |
|
![]() |
Air conditioning | A/C condenser fan assembly bolt | 10 | 7 | Bolt 6x1.0mm |
|
![]() |
Belt tensioner/Timing chains | Tensioner bolts | 12 | 9 |
|
![]() |
|
Belt tensioner/Timing chains | Timing balancer belt driven pulley | 29 | 21 |
|
![]() |
|
Valve cover | Valve cover bolts | 12 | 9 |
|
![]() |
|
PCM | PCM nuts | 12 | 9 | Nuts 6x1.0mm |
|
![]() |
Fuel system | Fuel pulsation damper | 22 | 16 |
|
![]() |
|
Fuel system | Fuel pressure regulator retainer bolts | 12 | 9 | Bolts 6mm |
|
![]() |
Fuel system | Fuel tank unit bolts | 4 | 3 |
|
![]() |
|
Fuel system | Fuel tank straps bolts | 38 | 28 |
|
![]() |
|
Fuel system | Fuel tank vapor control valve bolts | 4 | 3 |
|
![]() |
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheel hub assembly | Front spindle nut | 245 | 181 | Nut 24x1.5mm |
|
![]() |
Wheel hub assembly | Rear spindle nut | 181 | 133 | Nut 22x1.5mm, Disc brake |
|
![]() |
Wheel hub assembly | Rear spindle nut | 181 | 133 | Nut 22x1.5mm, Drum brake |
|
![]() |
Wheel hub assembly | Front wheel bearing splash guard screws | 9 | 7 |
|
![]() |
|
Wheel hub assembly | Rear splash guard mounting bolts | 9 | 7 | Disc brake |
|
![]() |
Wheel hub assembly | Rear backing plate mounting bolts | 54 | 40 | Drum brake |
|
![]() |
Flywheel/Flex plate | Flywheel bolts | 103 | 76 | Bolts 12x1.0mm |
|
![]() |
Flywheel/Flex plate | Drive plate bolts | 74 | 55 | Bolts 12x1.0mm |
|
![]() |
Transmission mount/case | Transmission mount bracket nuts | 38 | 28 | Nuts 10x1.25mm |
|
![]() |
Transmission mount/case | Transmission mount bracket nuts | 38 | 28 | Nuts 10x1.25mm |
|
![]() |
Transmission mount/case | Transmission mount bracket bolt | 54 | 40 | Bolt 12x1.25mm |
|
![]() |
Transmission mount/case | Transmission mount bracket bolt | 54 | 40 | Bolt 12x1.25mm |
|
![]() |
Transfer | Shift cable holder bolts | 10 | 7 | Bolts 6x1.0mm |
|
![]() |
Transfer | Shift cable cover bolts | 26 | 19 | Bolts 8x1.25mm |
|
![]() |
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Tie rod end | Outer tie rod end nut | 45 | 33 |
|
![]() |
|
Tie rod end | Front tie rod end ball joint nut | 43 | 32 | Nut 10x1.25mm |
|
![]() |
Steering knuckle | Tie rod end to Steering knuckle nut | 43 | 32 | Nut 10mm |
|
![]() |
Steering knuckle | Rear knuckle self-locking nut | 59 | 44 | Nut 12x1.25mm |
|
![]() |
Steering rack | Rack guide screw | 25 | 18 |
|
![]() |
|
Steering rack | Rack guide screw | 4 | 3 | Retighten |
|
![]() |
Steering rack | Gearbox housing cylinder end | 69 | 51 |
|
![]() |
|
Steering rack | Rack end | 78 | 58 |
|
![]() |
|
Steering rack | Gearbox mounting bolts | 38 | 28 |
|
![]() |
|
Steering rack | Gearbox stiffener plates mounting bolts | 43 | 32 |
|
![]() |
|
Steering rack | Stiffener plate attaching bolts | 38 | 28 |
|
![]() |
|
Pinion | Pinion shaft valve housing flange bolts | 20 | 15 |
|
![]() |
|
Steering column | Steering column attaching nuts | 16 | 12 |
|
![]() |
|
Steering column | Steering column bracket bolts | 22 | 16 |
|
![]() |
|
Steering shaft | Column shaft to Steering joint bolts | 22 | 16 |
|
![]() |
|
Steering wheel | Steering wheel bolt | 39 | 29 |
|
![]() |
|
Power steering | Power steering pump mounting bolt | 22 | 16 |
|
![]() |
|
Power steering | Pump lock bolt | 22 | 16 |
|
![]() |
|
Power steering | Pump cover assembly to Pump housing bolts | 20 | 15 | Bolts 8x1.25mm |
|
![]() |
Power steering | Power steering pump pulley nut | 64 | 47 |
|
![]() |
|
Power steering | Power steering pump housing flow control valve cap | 49 | 36 |
|
![]() |
|
Power steering | P/S joint adapter to Pump outlet bolts | 11 | 8 | Bolts 6x1.0mm |
|
![]() |
Power steering | Power steering pressure switch | 12 | 9 |
|
![]() |
|
Power steering | Feed line | 37 | 27 |
|
![]() |
|
Power steering | Return line | 28 | 21 |
|
![]() |
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust manifold self-locking nut | 31 | 23 | Nut 8x1.25mm |
|
![]() |
Exhaust manifold | Exhaust manifold self-locking nut | 31 | 23 | Nut 8x1.25mm |
|
![]() |
Exhaust manifold | Exhaust manifold self-locking nut | 31 | 23 | Nut 8x1.25mm |
|
![]() |
Exhaust manifold | Exhaust manifold bracket bolts | 44 | 32 | Bolts 10x1.25mm |
|
![]() |
Exhaust manifold | Exhaust manifold bracket bolts | 44 | 32 | Bolts 10x1.25mm |
|
![]() |
Exhaust manifold | Exhaust manifold bracket bolts | 44 | 32 | Bolts 10x1.25mm |
|
![]() |
Exhaust manifold | Exhaust manifold cover bolt | 22 | 16 | Bolt 8x1.25mm |
|
![]() |
Exhaust manifold | Exhaust manifold cover bolt | 12 | 9 | Bolt 6x1.0mm |
|
![]() |
Exhaust manifold | Exhaust manifold cover bolt | 22 | 16 | Bolt 8x1.25mm |
|
![]() |
Exhaust manifold | Exhaust manifold cover bolt | 22 | 16 | Bolt 8x1.25mm |
|
![]() |
Exhaust manifold | Exhaust pipe self-locking nut | 54 | 40 | Nut 10x1.25mm |
|
![]() |
Exhaust manifold | Exhaust pipe self-locking nut | 54 | 40 | Nut 10x1.25mm |
|
![]() |
Exhaust manifold | Exhaust pipe self-locking nut | 54 | 40 | Nut 10x1.25mm |
|
![]() |
Exhaust manifold | Exhaust heat shield bolt | 12 | 9 | Bolt 6x1.0mm |
|
![]() |
Exhaust manifold | Exhaust heat shield bolts | 12 | 9 | Bolts 6x1.0mm |
|
![]() |
EGR | Exhaust Gas Recirculation (EGR) valve nut | 22 | 16 | Nut 8x1.25mm |
|
![]() |
Muffler | Muffler self-locking nut | 54 | 40 | Nut 10x1.25mm |
|
![]() |
Muffler | Muffler self-locking nut | 54 | 40 | Nut 10x1.25mm |
|
![]() |
Catalytic converter | Three Way Catalytic Converter (TWC) bolt | 12 | 9 | Bolt 6x1.0mm |
|
![]() |
Catalytic converter | Three Way Catalytic Converter (TWC) bolt | 10 | 7 | Bolt 6x1.0mm |
|
![]() |
Catalytic converter | Three Way Catalytic Converter (TWC) self-locking nuts | 33 | 24 | Nuts 10x1.25mm |
|
![]() |
Catalytic converter | Three Way Catalytic Converter (TWC) self-locking nuts | 33 | 24 | Nuts 10x1.25mm |
|
![]() |
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Front brake caliper mounting bolts | 22 | 16 |
|
![]() |
|
Disc brake | Rear caliper slider bolts | 23 | 17 |
|
![]() |
|
Disc brake | Front brake caliper mounting bolts | 109 | 80 |
|
![]() |
|
Disc brake | Rear caliper bracket bolts | 56 | 41 |
|
![]() |
|
Disc brake | Front brake disc retaining screw | 9 | 7 |
|
![]() |
|
Disc brake | Rear brake disc retaining screws | 10 | 7 | Disc brake |
|
![]() |
Brake line | Brake line to Wheel cylinder | 15 | 11 |
|
![]() |
|
Brake line | Front brake hose mounting bolts | 9 | 7 |
|
![]() |
|
Brake line | Rear brake hose mounting bolts | 9 | 7 |
|
![]() |
|
Parking brake | Parking brake cable mounting bolt | 22 | 16 |
|
![]() |
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheels | Front wheel nuts | 108 | 80 | Nuts 12x1.5mm |
|
![]() |
Wheels | Rear wheel nuts | 108 | 80 | Nuts 12x1.5mm, Disc brake |
|
![]() |
Wheels | Rear wheel nuts | 108 | 80 | Nuts 12x1.5mm, Drum brake |
|
![]() |
Struts | Front strut upper mounting nuts | 50 | 37 |
|
![]() |
|
Struts | Front strut to Wishbone pinch bolt | 43 | 32 |
|
![]() |
|
Struts | Rear strut nuts | 50 | 37 |
|
![]() |
|
Shock absorbers/shocks | Front damper unit self-locking nut | 29 | 21 | Nut 10x1.25mm |
|
![]() |
Shock absorbers/shocks | Rear damper unit self-locking nut | 29 | 21 | Nut 10x1.25mm |
|
![]() |
Shock absorbers/shocks | Rear shock absorber lower bolt | 58 | 43 |
|
![]() |
|
Shock absorbers/shocks | Front damper pinch bolt | 43 | 32 | Bolt 10x1.25mm |
|
![]() |
Shock absorbers/shocks | Rear damper lower mount bolt | 59 | 44 | Bolt 10x1.25mm |
|
![]() |
Shock absorbers/shocks | Front damper flange nuts | 17 | 13 | Nuts 8x1.25mm |
|
![]() |
Shock absorbers/shocks | Front damper flange nuts | 50 | 37 | Nuts 10x1.25mm |
|
![]() |
Shock absorbers/shocks | Rear damper flange nuts | 50 | 37 | Nuts 10x1.25mm |
|
![]() |
Stabilizer bar | Stabilizer bar bolts | 22 | 16 |
|
![]() |
|
Sway bar links/Stabilizer links | Front stabilizer link self-locking nut | 39 | 29 | Nut 10x1.25mm |
|
![]() |
Sway bar links/Stabilizer links | Rear stabilizer link flange nut | 39 | 29 | Nut 10x1.25mm |
|
![]() |
Radius arm | Radius rod self-locking nut | 54 | 40 |
|
![]() |
|
Radius arm | Radius rod bolts | 162 | 119 | Bolts 14x1.5mm |
|
![]() |
Control arm | Front upper arm flange bolts | 64 | 47 | Bolts 10x1.25mm |
|
![]() |
Control arm | Rear upper arm bolt | 59 | 44 | Bolt 12x1.25mm |
|
![]() |
Control arm | Front lower arm mounting bolt | 64 | 47 | Bolt 12x1.25mm |
|
![]() |
Control arm | Rear lower arm mounting bolt | 59 | 44 | Bolt 12x1.25mm |
|
![]() |
Control arm | Rear lower arm mounting nut | 59 | 44 | Nut 12x1.25mm |
|
![]() |
Trailing arm | Trailing arm mounting bolts | 59 | 44 | Bolts 12x1.25mm |
|
![]() |
Trailing arm | Leading arm mounting bolts | 59 | 44 | Bolts 12x1.25mm |
|
![]() |
Ball joint | Front upper ball joint castle nut | 39 | 29 | Minimum torque, Nut 10x1.25mm |
|
![]() |
Ball joint | Front upper ball joint castle nut | 47 | 35 | Maximum torque, Nut 10x1.25mm |
|
![]() |
Ball joint | Rear upper ball joint castle nut | 49 | 36 | Minimum torque, Nut 12x1.25mm |
|
![]() |
Ball joint | Rear upper ball joint castle nut | 58 | 43 | Maximum torque, Nut 12x1.25mm |
|
![]() |
Ball joint | Front lower arm ball joint castle nut | 49 | 36 | Minimum torque, Nut 12x1.25mm |
|
![]() |
Ball joint | Front lower arm ball joint castle nut | 59 | 44 | Maximum torque, Nut 12x1.25mm |
|
![]() |
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
![Example of a Accord 6 Example of a Accord 6](https://tighttorque.com/media/pages/cars/honda/accord-6/8b391b4346-1712222940/honda_accord_rear.jpg)
By TTTNIS - Own work, Public Domain
Did you find the answer to your specific question?
👍 2 👎 4