Honda Accord 6 (1992-2002) Torque Spec Settings

Below you'll find the tightening torques for the Honda Accord 6 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for Honda Accord 6

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

---

All Torque Settings in Tables

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Exhaust manifold	Exhaust heat shield bolts	12	9	Bolts 6x1.0mm	Except F23A4
Muffler	Muffler self-locking nut	54	40	Nut 10x1.25mm	Except F23A4
Catalytic converter	Three Way Catalytic Converter (TWC) bolt	10	7	Bolt 6x1.0mm	Except F23A4
Catalytic converter	Three Way Catalytic Converter (TWC) self-locking nuts	33	24	Nuts 10x1.25mm	Except F23A4

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to