Honda Accord 7 (2002-2007) Torque Spec Settings
By EurovisionNim - Own work, CC BY-SA 4.0
Below you'll find the tightening torques for the Honda Accord 7 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Honda Accord 7
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Drain plug | 39 | 29 |
|
|
|
| Transmission fluid pan | Drain plug | 39 | 29 |
|
|
|
| Transmission fluid pan | Drain plug | 49 | 36 |
|
|
|
| Wheels | Wheel nuts | 108 | 80 |
|
|
|
| Wheels | Wheel nuts | 108 | 80 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2002 - 2007
- Generation: 7
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pump | Oil pump plate flange bolt | 12 | 9 |
|
|
|
| Intake manifold | Intake manifold gasket bolts | 3 | 2 |
|
|
|
| Engine mounts | Front engine mount bracket bolts | 54 | 40 |
|
|
|
| Engine mounts | Engine lower rear mount mounting bolts | 49 | 36 |
|
|
|
| Sensor | Input shaft (mainshaft) speed sensor | 12 | 9 |
|
|
|
| Sensor | Output shaft (Countershaft) speed sensor | 12 | 9 |
|
|
|
| Starter | Starter bolt | 44 | 32 | Bolt 10x1.25mm |
|
|
| Starter | Starter bolt | 64 | 47 | Bolt 12x1.25mm |
|
|
| Starter | Starter bolt | 44 | 32 | Bolt 10x1.25mm |
|
|
| Starter | Starter bolt | 64 | 47 | Bolt 12x1.25mm |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Differential assembly bolts | 44 | 32 |
|
|
|
| Wheel hub assembly | Spindle nut | 245 | 181 |
|
|
|
| Clutch assembly | Clutch line clamp bracket bolt | 54 | 40 |
|
|
|
| Clutch assembly | Clutch cover bolts | 12 | 9 |
|
|
|
| Clutch assembly | Countershaft assembly | 118 | 87 |
|
|
|
| Flywheel/Flex plate | Flywheel mounting bolts | 103 | 76 |
|
|
|
| Transmission fluid pan | Drain plug | 39 | 29 |
|
|
|
| Transmission fluid pan | Oil filler plug | 44 | 32 |
|
|
|
| Transmission mount/case | Transmission upper mount bolt | 54 | 40 |
|
|
|
| Transmission mount/case | Transmission lower mount bolts | 44 | 32 |
|
|
|
| Transmission mount/case | Transmission case cap | 12 | 9 |
|
|
|
| Transfer | Shift lever housing bolts | 22 | 16 |
|
|
|
| Transfer | Shift lever knob locknut | 8 | 6 |
|
|
|
| Transfer | Select cable bolt | 22 | 16 |
|
|
|
| Transfer | Shift cable holder bolts | 27 | 20 |
|
|
|
| Transfer | Shift cable bracket bolts | 10 | 7 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By EurovisionNim - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 5 👎 5