Honda Accord 8 (2007-2012) Torque Spec Settings
By OSX - Own work, Public Domain
Below you'll find the tightening torques for the Honda Accord 8 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Honda Accord 8
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Drain plug | 39 | 29 |
|
|
|
| Transmission fluid pan | Drain plug | 49 | 36 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2012
- Generation: 8
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Cylinder head | Cylinder head bolts | 39 | 29 |
|
|
|
| Cylinder head | Cylinder head cover bolts | 12 | 9 |
|
|
|
| Engine mounts | Engine cover bolts | 12 | 9 |
|
|
|
| Camshaft | VTC actuator mounting bolt | 113 | 83 |
|
|
|
| Camshaft | Exhaust camshaft sprocket mounting bolt | 72 | 53 |
|
|
|
| Camshaft | Camshaft holder mounting bolts | 22 | 16 |
|
|
|
| Camshaft | Intake locknut | 14 | 10 |
|
|
|
| Camshaft | Exhaust locknut | 14 | 10 |
|
|
|
| Camshaft | Cam chain guide A bolts | 12 | 9 |
|
|
|
| Camshaft | Cam chain guide B bolts | 22 | 16 |
|
|
|
| Camshaft | CMP pulse plates | 39 | 29 |
|
|
|
| Crankshaft | Crankshaft pulley bolt | 49 | 36 |
|
|
|
| Belt tensioner/Timing chains | Tensioner arm bolt | 22 | 16 |
|
|
|
| Belt tensioner/Timing chains | Chain case cover bolts | 12 | 9 |
|
|
|
| Rocker arm | Rocker shaft holders bolts | 12 | 9 | Bolts 6x1.0mm |
|
|
| Rocker arm | Rocker shaft holders bolts | 22 | 16 | Bolts 8x1.25mm |
|
|
| Rocker arm | Rocker arm oil pressure switch | 22 | 16 |
|
|
|
| Fuel system | Fuel injector connectors bolt | 12 | 9 |
|
|
|
| Fuel system | Fuel fill pipe bolt | 10 | 7 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By OSX - Own work, Public Domain
Did you find the answer to your specific question?
👍 9 👎 4