Honda Accord 8 (2007-2012) Torque Spec Settings
![](https://tighttorque.com/media/pages/cars/honda/accord-8/c7a69937a6-1712222939/1920px-2008-2011-honda-accord-euro-sedan-2011-06-15-01-1400x-q80.jpg)
By OSX - Own work, Public Domain
Below you'll find the tightening torques for the Honda Accord 8 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Honda Accord 8
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Drain plug | 39 | 29 |
|
![]() |
|
Transmission fluid pan | Drain plug | 49 | 36 |
|
![]() |
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2012
- Generation: 8
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Engine mounts | Front engine mount bolt | 54 | 40 |
|
![]() |
|
Engine mounts | Rear engine mount bolts | 54 | 40 | Bolts 10x1.25mm |
|
![]() |
Engine mounts | Rear engine mount bolt | 78 | 58 | Bolt 12x1.25mm |
|
![]() |
Engine mounts | Front engine mount bracket bolts | 64 | 47 |
|
![]() |
|
Engine mounts | Rear engine mount bracket bolts | 88 | 65 |
|
![]() |
|
Engine mounts | Rear engine mount upper bracket bolts | 54 | 40 |
|
![]() |
|
Sensor | Input shaft (mainshaft) speed sensor bolt | 12 | 9 |
|
![]() |
|
Sensor | Output shaft (countershaft) speed sensor bolt | 12 | 9 |
|
![]() |
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Differential | Final driven gear to Differential carrier bolts | 101 | 74 |
|
![]() |
|
Flywheel/Flex plate | Drive plate bolts | 74 | 55 |
|
![]() |
|
Transmission fluid pan | Drain plug | 49 | 36 |
|
![]() |
|
Transmission fluid pan | Automatic transmission fluid (ATF) cooler line brackets bolts | 12 | 9 |
|
![]() |
|
Transmission fluid pan | ATF filter holder bolt | 12 | 9 |
|
![]() |
|
Transmission fluid pan | Transmission fluid pressure switch | 20 | 15 |
|
![]() |
|
Transmission mount/case | Upper transmission housing mounting bolts | 64 | 47 |
|
![]() |
|
Transmission mount/case | Upper transmission mount bracket mounting bolts | 59 | 44 |
|
![]() |
|
Transmission mount/case | Front lower transmission housing mounting bolts | 44 | 32 | Bolts 10x1.25mm |
|
![]() |
Transmission mount/case | Front lower transmission housing mounting bolts | 64 | 47 | Bolts 12x1.25mm |
|
![]() |
Transmission mount/case | Lower transmission mount bolts | 54 | 40 |
|
![]() |
|
Transmission mount/case | Transmission lower mount nuts | 44 | 32 |
|
![]() |
|
Transmission mount/case | Rear transmission housing mounting bolts | 64 | 47 |
|
![]() |
|
Torque converter | Torque converter to Drive plate bolts | 12 | 9 |
|
![]() |
|
Transfer | Shift cable bracket bolts | 10 | 7 |
|
![]() |
|
Transfer | Shift cable cover bolts | 12 | 9 |
|
![]() |
|
Transfer | Shift cable end nut | 22 | 16 |
|
![]() |
|
Transfer | Shift lever bracket base bolts | 22 | 16 |
|
![]() |
|
Transfer | Shift lever knob screws | 3 | 2 |
|
![]() |
|
Transfer | Control lever lock bolt | 14 | 10 |
|
![]() |
|
Transfer | Transmission range switch cover bolt | 12 | 9 |
|
![]() |
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Power steering | Power steering fluid inlet line clamp bracket bolt | 10 | 7 |
|
![]() |
|
Power steering | Power steering fluid return line clamp bolt | 10 | 7 |
|
![]() |
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Struts | Strut brace mounting nuts | 22 | 16 |
|
![]() |
|
Ball joint | Knuckle ball joint to Lower arms castle nut | 78 | 58 | Minimum torque |
|
![]() |
Ball joint | Knuckle ball joint to Lower arms castle nut | 88 | 65 | Maximum torque |
|
![]() |
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
![Example of a Accord 8 Example of a Accord 8](https://tighttorque.com/media/pages/cars/honda/accord-8/c0ffd10386-1712222939/1920px-2008-2011_honda_accord_euro_sedan_-2011-06-15-_02.jpg)
By OSX - Own work, Public Domain
Did you find the answer to your specific question?
👍 4 👎 4