Renault Clio 3 (2005-2014) Torque Spec Settings
M 93, Public domain, via Wikimedia Commons
Below you'll find the tightening torques for the Renault Clio 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Renault Clio 3
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug | 20 | 15 |
|
|
|
| Spark plugs | Spark plugs | 28 | 21 |
|
|
|
| Wheels | Wheel bolts | 105 | 77 | Use wheel impact socket #17. Use a torque wrench. |
|
|
| Wheels | Wheel bolts | 105 | 77 | Use wheel impact socket #17. Use a torque wrench. |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2014
- Generation: 3
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug | 20 | 15 |
|
|
|
| Oil filter | Oil filter nipple | 55 | 41 |
|
|
|
| Cylinder head | Cylinder head bolts | 30 | 22 | Initial tightening |
|
|
| Cylinder head | Cylinder head bolts | 30 | 22 | Second tightening |
|
|
| Spark plugs | Spark plugs | 28 | 21 |
|
|
|
| Throttle body | Throttle valve bolts | 10 | 7 |
|
|
|
| Throttle body | Reinforcement bracket to Throttle valve bolt | 12 | 9 |
|
|
|
| Throttle body | Air inlet pipe clips between air filter unit and throttle valve | 6 | 4 |
|
|
|
| Alternator | Upstream oxygen sensor | 44 | 32 |
|
|
|
| Alternator | Alternator mounting bolts | 25 | 18 |
|
|
|
| Starter | Starter lower bolt | 38 | 28 |
|
|
|
| Starter | Starter upper bolts | 38 | 28 |
|
|
|
| Battery | Ignition coil mounting bolts | 15 | 11 |
|
|
|
| Camshaft | Exhaust camshaft pulley nut | 30 | 22 |
|
|
|
| Camshaft | Inlet camshaft dephaser bolt | 30 | 22 |
|
|
|
| Camshaft | Inlet camshaft dephaser pulley blanking cover | 15 | 11 |
|
|
|
| Crankshaft | Crankshaft accessories pulley bolt | 40 | 30 | Step 1 |
|
|
| Air conditioning | Air conditioning compressor mounting bolts | 25 | 18 |
|
|
|
| Belt tensioner/Timing chains | Tensioning roller nut | 7 | 5 |
|
|
|
| Belt tensioner/Timing chains | Fixed roller bolt | 50 | 37 |
|
|
|
| Belt tensioner/Timing chains | Lower timing cover bolts | 9 | 7 |
|
|
|
| Belt tensioner/Timing chains | Lower timing cover bolts | 38 | 28 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Clutch assembly | Mechanism mounting bolts | 20 | 15 |
|
|
|
| Flywheel/Flex plate | Flywheel bolts | 30 | 22 | Step 1 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold nuts | 30 | 22 |
|
|
|
| Exhaust manifold | Exhaust manifold stud | 9 | 7 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By M 93 - Own work, Public Domain
Did you find the answer to your specific question?
👍 1 👎 7
